Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Cezary Rojewski <cezary.rojewski@intel.com>,
	linux-sound@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH v3 5/8] ASoC: mediatek: mt8186: Fix MCK error handling
Date: Fri, 28 Aug 2026 16:15:29 +0700	[thread overview]
Message-ID: <20260828091532.600047-6-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260828091532.600047-1-phucduc.bui@gmail.com>

From: bui duc phuc <phucduc.bui@gmail.com>

The mt8186_mck_enable() function returns immediately when a clock
operation fails, leaving previously enabled clocks active.

Add error paths to disable previously enabled clocks before returning
the error.

Fixes: 55b423d5623c ("ASoC: mediatek: mt8186: support audio clock control in platform driver")
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/mediatek/mt8186/mt8186-afe-clk.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/sound/soc/mediatek/mt8186/mt8186-afe-clk.c b/sound/soc/mediatek/mt8186/mt8186-afe-clk.c
index 85fe828ca5ae..6d2871254e32 100644
--- a/sound/soc/mediatek/mt8186/mt8186-afe-clk.c
+++ b/sound/soc/mediatek/mt8186/mt8186-afe-clk.c
@@ -528,7 +528,7 @@ int mt8186_mck_enable(struct mtk_base_afe *afe, int mck_id, int rate)
 		if (ret) {
 			dev_err(afe->dev, "%s(), clk_prepare_enable %s fail %d\n",
 				__func__, aud_clks[m_sel_id], ret);
-			return ret;
+			goto ERR_ENABLE_MCLK;
 		}
 		ret = clk_set_parent(afe_priv->clk[m_sel_id],
 				     afe_priv->clk[apll_clk_id]);
@@ -536,7 +536,7 @@ int mt8186_mck_enable(struct mtk_base_afe *afe, int mck_id, int rate)
 			dev_err(afe->dev, "%s(), clk_set_parent %s-%s fail %d\n",
 				__func__, aud_clks[m_sel_id],
 				aud_clks[apll_clk_id], ret);
-			return ret;
+			goto ERR_SELECT_MCLK;
 		}
 	}
 
@@ -545,16 +545,25 @@ int mt8186_mck_enable(struct mtk_base_afe *afe, int mck_id, int rate)
 	if (ret) {
 		dev_err(afe->dev, "%s(), clk_prepare_enable %s fail %d\n",
 			__func__, aud_clks[div_clk_id], ret);
-		return ret;
+		goto ERR_ENABLE_MCLK_DIV;
 	}
 	ret = clk_set_rate(afe_priv->clk[div_clk_id], rate);
 	if (ret) {
 		dev_err(afe->dev, "%s(), clk_set_rate %s, rate %d, fail %d\n",
 			__func__, aud_clks[div_clk_id], rate, ret);
-		return ret;
+		goto ERR_SET_MCLK_RATE;
 	}
 
 	return 0;
+
+ERR_SET_MCLK_RATE:
+	clk_disable_unprepare(afe_priv->clk[div_clk_id]);
+ERR_ENABLE_MCLK_DIV:
+ERR_SELECT_MCLK:
+	if (m_sel_id >= 0)
+		clk_disable_unprepare(afe_priv->clk[m_sel_id]);
+ERR_ENABLE_MCLK:
+	return ret;
 }
 
 void mt8186_mck_disable(struct mtk_base_afe *afe, int mck_id)
-- 
2.43.0



  parent reply	other threads:[~2026-08-28  9:16 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-28  9:15 [PATCH v3 0/8] ASoC: mediatek: mt8186: Fix clock error handling phucduc.bui
2026-08-28  9:15 ` [PATCH v3 1/8] ASoC: mediatek: mt8186: Fix APLL mux setting " phucduc.bui
2026-08-28  9:15 ` [PATCH v3 2/8] ASoC: mediatek: mt8186: Fix clock handling in mux disable path phucduc.bui
2026-08-28  9:15 ` [PATCH v3 3/8] ASoC: mediatek: mt8186: Fix AFE clock error handling phucduc.bui
2026-08-28  9:15 ` [PATCH v3 4/8] ASoC: mediatek: mt8186: Fix APLL enable " phucduc.bui
2026-08-28  9:15 ` phucduc.bui [this message]
2026-08-28  9:15 ` [PATCH v3 6/8] ASoC: mediatek: mt8186: Fix gpio rollback on adda dl/ul partial failure phucduc.bui
2026-08-28  9:15 ` [PATCH v3 7/8] ASoC: mediatek: mt8186: Handle regcache sync failure phucduc.bui
2026-08-28  9:15 ` [PATCH v3 8/8] ASoC: mediatek: mt8186: Drop redundant probe error messages phucduc.bui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260828091532.600047-6-phucduc.bui@gmail.com \
    --to=phucduc.bui@gmail.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox