From: Mark Brown <broonie@kernel.org>
To: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Shuah Khan <shuah@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>, Oliver Upton <oupton@kernel.org>,
Fuad Tabba <fuad.tabba@linux.dev>,
Mark Rutland <mark.rutland@arm.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kselftest@vger.kernel.org, Mark Brown <broonie@kernel.org>
Subject: [PATCH 04/11] kselftest/arm64: Use exit_error() rather than SIGABRT in fp-stress
Date: Tue, 01 Sep 2026 18:06:44 +0100 [thread overview]
Message-ID: <20260901-arm64-fp-stress-kvm-v1-4-31bce995b49b@kernel.org> (raw)
In-Reply-To: <20260901-arm64-fp-stress-kvm-v1-0-31bce995b49b@kernel.org>
The fp-stress test loads all deliver a SIGABRT to the process group to
report some errors they detect. There is no particular reason to use
this mechanism over exiting with an error code, the fp-stress harness does
not care. In order to facilitate running as KVM guests replace this with
use of the exit_error() function we added.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
tools/testing/selftests/arm64/fp/fpsimd-test.S | 10 ++--------
tools/testing/selftests/arm64/fp/sve-test.S | 10 ++--------
tools/testing/selftests/arm64/fp/za-test.S | 10 ++--------
tools/testing/selftests/arm64/fp/zt-test.S | 8 +-------
4 files changed, 7 insertions(+), 31 deletions(-)
diff --git a/tools/testing/selftests/arm64/fp/fpsimd-test.S b/tools/testing/selftests/arm64/fp/fpsimd-test.S
index 5ee8ef51ea4e..fcbb3a872490 100644
--- a/tools/testing/selftests/arm64/fp/fpsimd-test.S
+++ b/tools/testing/selftests/arm64/fp/fpsimd-test.S
@@ -176,7 +176,7 @@ function setsignal
cbz w0, 1f
puts "sigaction failure\n"
- b .Labort
+ b exit_error
1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16)
ret
@@ -224,7 +224,7 @@ function _start
1: puts "Bad vector length: "
mov x0, x19
bl putdecn
- b .Labort
+ b exit_error
2: puts "Vector length:\t"
mov x0, x19
@@ -266,12 +266,6 @@ function _start
add x22, x22, #1
b .Ltest_loop
-
-.Labort:
- mov x0, #0
- mov x1, #SIGABRT
- mov x8, #__NR_kill
- svc #0
endfunction
function barf
diff --git a/tools/testing/selftests/arm64/fp/sve-test.S b/tools/testing/selftests/arm64/fp/sve-test.S
index 3447fe0e5554..26efdbdd88f9 100644
--- a/tools/testing/selftests/arm64/fp/sve-test.S
+++ b/tools/testing/selftests/arm64/fp/sve-test.S
@@ -344,7 +344,7 @@ function setsignal
cbz w0, 1f
puts "sigaction failure\n"
- b .Labort
+ b exit_error
1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16)
ret
@@ -397,7 +397,7 @@ function _start
1: puts "Bad vector length: "
mov x0, x19
bl putdecn
- b .Labort
+ b exit_error
2: puts "Vector length:\t"
mov x0, x19
@@ -474,12 +474,6 @@ function _start
add x22, x22, #1
b .Ltest_loop
-
-.Labort:
- mov x0, #0
- mov x1, #SIGABRT
- mov x8, #__NR_kill
- svc #0
endfunction
function barf
diff --git a/tools/testing/selftests/arm64/fp/za-test.S b/tools/testing/selftests/arm64/fp/za-test.S
index 33dc4ce8bfa1..7208bb2db9f1 100644
--- a/tools/testing/selftests/arm64/fp/za-test.S
+++ b/tools/testing/selftests/arm64/fp/za-test.S
@@ -189,7 +189,7 @@ function setsignal
cbz w0, 1f
puts "sigaction failure\n"
- b .Labort
+ b exit_error
1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16)
ret
@@ -240,7 +240,7 @@ function _start
1: puts "bad vector length: "
mov x0, x19
bl putdecn
- b .Labort
+ b exit_error
2: puts "vector length:\t"
mov x0, x19
@@ -288,12 +288,6 @@ function _start
add x22, x22, #1 // Everything still working
b .Ltest_loop
-
-.Labort:
- mov x0, #0
- mov x1, #SIGABRT
- mov x8, #__NR_kill
- svc #0
endfunction
function barf
diff --git a/tools/testing/selftests/arm64/fp/zt-test.S b/tools/testing/selftests/arm64/fp/zt-test.S
index c67242c2d5ab..c6cfbdeb2f0c 100644
--- a/tools/testing/selftests/arm64/fp/zt-test.S
+++ b/tools/testing/selftests/arm64/fp/zt-test.S
@@ -158,7 +158,7 @@ function setsignal
cbz w0, 1f
puts "sigaction failure\n"
- b .Labort
+ b exit_error
1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16)
ret
@@ -222,12 +222,6 @@ function _start
add x22, x22, #1 // Everything still working
b .Ltest_loop
-
-.Labort:
- mov x0, #0
- mov x1, #SIGABRT
- mov x8, #__NR_kill
- svc #0
endfunction
function barf
--
2.47.3
next prev parent reply other threads:[~2026-09-01 17:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 17:06 [PATCH 00/11] kselftest/arm64: Add coverage of interactions with KVM to fp-stress Mark Brown
2026-09-01 17:06 ` [PATCH 01/11] kselftest/arm64: Factor Linux syscalls out of asm-utils.S Mark Brown
2026-09-01 17:06 ` [PATCH 02/11] kselftest/arm64: Factor shared signal handlers out of fp-stress loads Mark Brown
2026-09-01 17:06 ` [PATCH 03/11] kselftest/arm64: Move exit calls " Mark Brown
2026-09-01 17:06 ` Mark Brown [this message]
2026-09-01 17:06 ` [PATCH 05/11] kselftest/arm64: Exit with an error code on data mismatches in fp-stress Mark Brown
2026-09-01 17:06 ` [PATCH 06/11] kselftest/arm64: Factor startup code out of fp-stress load programs Mark Brown
2026-09-01 17:06 ` [PATCH 07/11] kselftest/arm64: Remove the sched_yield()s from the fp-stress loads Mark Brown
2026-09-01 17:06 ` [PATCH 08/11] kselftest/arm64: Add a very simple VMM for use in fp-stress Mark Brown
2026-09-01 17:06 ` [PATCH 09/11] kselftest/arm64: Build KVM guest versions of the fp-stress loads Mark Brown
2026-09-01 17:06 ` [PATCH 10/11] kselftest/arm64: Use execv() to start fp-stress test loads Mark Brown
2026-09-01 17:06 ` [PATCH 11/11] kselftest/arm64: Run KVM guests from fp-stress Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260901-arm64-fp-stress-kvm-v1-4-31bce995b49b@kernel.org \
--to=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=fuad.tabba@linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=oupton@kernel.org \
--cc=shuah@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox