From: Pranjal Shrivastava <praan@google.com>
To: iommu@lists.linux.dev
Cc: Will Deacon <will@kernel.org>, Joerg Roedel <joro@8bytes.org>,
Robin Murphy <robin.murphy@arm.com>,
Jason Gunthorpe <jgg@ziepe.ca>,
Mostafa Saleh <smostafa@google.com>,
Nicolin Chen <nicolinc@nvidia.com>,
Daniel Mentz <danielmentz@google.com>,
Ashish Mhetre <amhetre@nvidia.com>,
linux-arm-kernel@lists.infradead.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
rafael@kernel.org, Danilo Krummrich <dakr@kernel.org>,
Thomas Gleixner <tglx@kernel.org>,
driver-core@lists.linux.dev,
Pranjal Shrivastava <praan@google.com>,
Jason Gunthorpe <jgg@nvidia.com>
Subject: [PATCH v10 01/15] iommu/arm-smmu-v3: Refactor arm_smmu_setup_irqs
Date: Tue, 8 Sep 2026 17:16:57 +0000 [thread overview]
Message-ID: <20260908171712.356645-2-praan@google.com> (raw)
In-Reply-To: <20260908171712.356645-1-praan@google.com>
Refactor arm_smmu_setup_irqs by splitting it into two parts, one for
registering interrupt handlers and the other one for enabling interrupt
generation in the hardware. This refactor helps in re-initialization of
hardware interrupts as part of a subsequent patch that enables runtime
power management for the arm-smmu-v3 driver.
Additionally, pass a 'resume' flag to arm_smmu_device_reset() to skip
registering IRQ handlers again during resume. On probe, handlers are
registered after queues are configured but before enabling translation.
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
---
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 75 +++++++++++++++------
1 file changed, 56 insertions(+), 19 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 5732f3ba0122..270e6617a19a 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -4756,14 +4756,55 @@ static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
}
}
+static void arm_smmu_enable_irqs(struct arm_smmu_device *smmu)
+{
+ int ret;
+ u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
+
+ if (smmu->features & ARM_SMMU_FEAT_PRI)
+ irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
+
+ /*
+ * Enable interrupt generation on the SMMU.
+ * As per the ARM SMMUv3 spec section 6.3.17 (SMMU_IRQ_CTRL):
+ *
+ * Completion of an Update of x_IRQEN from 0 to 1 guarantees that the
+ * MSI configuration in SMMU_x_IRQ_CFG{0,1,2} will be used for all
+ * future MSIs generated from source x. All wired or MSI interrupts
+ * that are triggered from a source relate to occurrences that happened
+ * after the completion of the Update that enabled the source. It is
+ * not permitted to trigger an interrupt that relates to an occurrence
+ * that happened before the source was enabled, even if the source was
+ * previously enabled at the time of the occurrence.
+ */
+ ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
+ ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
+ if (ret)
+ dev_warn(smmu->dev, "failed to enable irqs\n");
+}
+
+static int arm_smmu_disable_irqs(struct arm_smmu_device *smmu)
+{
+ return arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
+ ARM_SMMU_IRQ_CTRLACK);
+}
+
static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
{
int ret, irq;
- u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
- /* Disable IRQs first */
- ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
- ARM_SMMU_IRQ_CTRLACK);
+ /*
+ * Disable IRQs first as required by the Arm SMMUv3 spec.
+ * As per the ARM SMMUv3 spec section 6.3.17 (SMMU_IRQ_CTRL):
+ *
+ * An Update of x_IRQEN from 1 to 0 completes when all prior MSIs have
+ * completed. An MSI has completed when it is visible to its
+ * Shareability domain, or when it has aborted, and the abort is
+ * recorded in the appropriate SMMU_(*_)GERROR bit. Completion of this
+ * Update guarantees that no new MSI writes or wired edge events from
+ * source x become visible until the source is re-enabled.
+ */
+ ret = arm_smmu_disable_irqs(smmu);
if (ret) {
dev_err(smmu->dev, "failed to disable irqs\n");
return ret;
@@ -4785,15 +4826,6 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
} else
arm_smmu_setup_unique_irqs(smmu);
- if (smmu->features & ARM_SMMU_FEAT_PRI)
- irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
-
- /* Enable interrupt generation on the SMMU */
- ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
- ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
- if (ret)
- dev_warn(smmu->dev, "failed to enable irqs\n");
-
return 0;
}
@@ -4841,7 +4873,7 @@ static void arm_smmu_write_strtab(struct arm_smmu_device *smmu)
writel_relaxed(reg, smmu->base + ARM_SMMU_STRTAB_BASE_CFG);
}
-static int arm_smmu_device_reset(struct arm_smmu_device *smmu)
+static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool resume)
{
int ret;
u32 reg, enables;
@@ -4943,12 +4975,17 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu)
}
}
- ret = arm_smmu_setup_irqs(smmu);
- if (ret) {
- dev_err(smmu->dev, "failed to setup irqs\n");
- return ret;
+ if (!resume) {
+ ret = arm_smmu_setup_irqs(smmu);
+ if (ret) {
+ dev_err(smmu->dev, "failed to setup irqs\n");
+ return ret;
+ }
}
+ /* Enable interrupt generation on the SMMU */
+ arm_smmu_enable_irqs(smmu);
+
if (is_kdump_kernel())
enables &= ~(CR0_EVTQEN | CR0_PRIQEN);
@@ -5594,7 +5631,7 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
arm_smmu_rmr_install_bypass_ste(smmu);
/* Reset the device */
- ret = arm_smmu_device_reset(smmu);
+ ret = arm_smmu_device_reset(smmu, false);
if (ret) {
arm_smmu_device_disable(smmu);
return ret;
--
2.55.0.979.g7e5102b832-goog
next prev parent reply other threads:[~2026-09-08 17:17 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-08 17:16 [PATCH v10 00/15] iommu/arm-smmu-v3: Implement Runtime/System Sleep ops Pranjal Shrivastava
2026-09-08 17:16 ` Pranjal Shrivastava [this message]
2026-09-08 17:16 ` [PATCH v10 02/15] iommu/arm-smmu-v3: Add Q_POS() macro Pranjal Shrivastava
2026-09-08 17:16 ` [PATCH v10 03/15] iommu/arm-smmu-v3: Add arm_smmu_drain_queue() helper Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 04/15] iommu/tegra241-cmdqv: Add a helper to drain VCMDQs Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 05/15] iommu/arm-smmu-v3: Add a helper to drain cmd queues Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 06/15] iommu/tegra241-cmdqv: Restore PROD and CONS after resume Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 07/15] platform-msi: Introduce platform_device_msi_rewrite() Pranjal Shrivastava
2026-09-08 19:40 ` Thomas Gleixner
2026-09-08 20:15 ` Pranjal Shrivastava
2026-09-08 20:16 ` Pranjal Shrivastava
2026-09-09 9:20 ` Thomas Gleixner
2026-09-08 22:55 ` Jason Gunthorpe
2026-09-08 17:17 ` [PATCH v10 08/15] iommu/arm-smmu-v3: Cache and restore MSI config Pranjal Shrivastava
2026-09-08 19:56 ` Thomas Gleixner
2026-09-08 20:23 ` Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 09/15] iommu/arm-smmu-v3: Factor out arm_smmu_handle_gerror() Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 10/15] iommu/arm-smmu-v3: Add CMDQ_PROD_STOP_FLAG to gate CMDQ submissions Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 11/15] iommu/tegra241-cmdqv: Add a helper to quiesce VCMDQs Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 12/15] iommu/arm-smmu-v3: Implement pm_runtime & system sleep ops Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 13/15] iommu/arm-smmu-v3: Enable pm_runtime and setup devlinks Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 14/15] iommu/arm-smmu-v3: Invoke pm_runtime before hw access Pranjal Shrivastava
2026-09-08 17:17 ` [PATCH v10 15/15] iommu/arm-smmu-v3: Add KUnit unit tests for Runtime PM Pranjal Shrivastava
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260908171712.356645-2-praan@google.com \
--to=praan@google.com \
--cc=amhetre@nvidia.com \
--cc=dakr@kernel.org \
--cc=danielmentz@google.com \
--cc=driver-core@lists.linux.dev \
--cc=gregkh@linuxfoundation.org \
--cc=iommu@lists.linux.dev \
--cc=jgg@nvidia.com \
--cc=jgg@ziepe.ca \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nicolinc@nvidia.com \
--cc=rafael@kernel.org \
--cc=robin.murphy@arm.com \
--cc=smostafa@google.com \
--cc=tglx@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox