[PATCH v4 0/6] iio: adc: bcm_iproc_adc: convert to devm-managed APIs

[PATCH v4 0/6] iio: adc: bcm_iproc_adc: convert to devm-managed APIs

[mdshahid03]

From: Mohammad Shahid <mdshahid03@gmail.com>

Changes in v4:
- Move the ADC enable error-path cleanup simplification into the
  clock conversion patch.
- Simplify the ADC devm cleanup action.
- Restore the blank line after the copyright header.

---
Mohammad Shahid (6):
  iio: adc: bcm_iproc_adc: sort headers alphabetically
  iio: adc: bcm_iproc_adc: fix include dependencies
  iio: adc: bcm_iproc_adc: use devm-managed clock
  iio: adc: bcm_iproc_adc: use devm-managed ADC cleanup
  iio: adc: bcm_iproc_adc: use devm-managed mutex initialization
  iio: adc: bcm_iproc_adc: use devm-managed IIO device registration

 drivers/iio/adc/bcm_iproc_adc.c | 65 +++++++++++++--------------------
 1 file changed, 25 insertions(+), 40 deletions(-)

-- 
2.43.0

[PATCH v4 1/6] iio: adc: bcm_iproc_adc: sort headers alphabetically

[mdshahid03]

From: Mohammad Shahid <mdshahid03@gmail.com>

Sort the Linux kernel headers alphabetically to improve consistency
and make the include list easier to maintain.

Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
---
 drivers/iio/adc/bcm_iproc_adc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
index ab66b97d2f04..e46e3761993a 100644
--- a/drivers/iio/adc/bcm_iproc_adc.c
+++ b/drivers/iio/adc/bcm_iproc_adc.c
@@ -3,14 +3,14 @@
  * Copyright 2016 Broadcom
  */
 
-#include <linux/module.h>
-#include <linux/io.h>
 #include <linux/clk.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 
 #include <linux/iio/iio.h>
 
-- 
2.43.0

[PATCH v4 2/6] iio: adc: bcm_iproc_adc: fix include dependencies

[mdshahid03]

From: Mohammad Shahid <mdshahid03@gmail.com>

Add the headers required directly by the driver for the APIs and
types it uses.

Remove the unused linux/io.h header now that register access is
handled through regmap APIs.

Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
---
 drivers/iio/adc/bcm_iproc_adc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
index e46e3761993a..21bd51da9cd6 100644
--- a/drivers/iio/adc/bcm_iproc_adc.c
+++ b/drivers/iio/adc/bcm_iproc_adc.c
@@ -3,14 +3,18 @@
  * Copyright 2016 Broadcom
  */
 
+#include <linux/array_size.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
+#include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/types.h>
 
 #include <linux/iio/iio.h>
 
-- 
2.43.0

[PATCH v4 3/6] iio: adc: bcm_iproc_adc: use devm-managed clock

[mdshahid03]

From: Mohammad Shahid <mdshahid03@gmail.com>

Convert the ADC clock to use devm-managed APIs to simplify
resource cleanup.

Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
---
 drivers/iio/adc/bcm_iproc_adc.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
index 21bd51da9cd6..d6f82f8ddee1 100644
--- a/drivers/iio/adc/bcm_iproc_adc.c
+++ b/drivers/iio/adc/bcm_iproc_adc.c
@@ -110,7 +110,6 @@ do { \
 
 struct iproc_adc_priv {
 	struct regmap *regmap;
-	struct clk *adc_clk;
 	struct mutex mutex;
 	int  irqno;
 	int chan_val;
@@ -511,6 +510,7 @@ static int iproc_adc_probe(struct platform_device *pdev)
 	struct iproc_adc_priv *adc_priv;
 	struct iio_dev *indio_dev = NULL;
 	struct device *dev = &pdev->dev;
+	struct clk *adc_clk;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc_priv));
@@ -530,10 +530,9 @@ static int iproc_adc_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(adc_priv->regmap),
 				     "failed to get handle for tsc syscon\n");
 
-	adc_priv->adc_clk = devm_clk_get(dev, "tsc_clk");
-	if (IS_ERR(adc_priv->adc_clk))
-		return dev_err_probe(dev, PTR_ERR(adc_priv->adc_clk),
-				     "failed getting clock tsc_clk\n");
+	adc_clk = devm_clk_get_enabled(dev, "tsc_clk");
+	if (IS_ERR(adc_clk))
+		return dev_err_probe(dev, PTR_ERR(adc_clk), "failed to enable clock\n");
 
 	adc_priv->irqno = platform_get_irq(pdev, 0);
 	if (adc_priv->irqno < 0)
@@ -551,13 +550,9 @@ static int iproc_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = clk_prepare_enable(adc_priv->adc_clk);
-	if (ret)
-		return dev_err_probe(dev, ret, "failed to enable clock\n");
-
 	ret = iproc_adc_enable(indio_dev);
 	if (ret)
-		goto err_adc_enable;
+		return ret;
 
 	indio_dev->name = "iproc-static-adc";
 	indio_dev->info = &iproc_adc_iio_info;
@@ -575,8 +570,6 @@ static int iproc_adc_probe(struct platform_device *pdev)
 
 err_clk:
 	iproc_adc_disable(indio_dev);
-err_adc_enable:
-	clk_disable_unprepare(adc_priv->adc_clk);
 
 	return ret;
 }
@@ -584,11 +577,9 @@ static int iproc_adc_probe(struct platform_device *pdev)
 static void iproc_adc_remove(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
-	struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
 	iproc_adc_disable(indio_dev);
-	clk_disable_unprepare(adc_priv->adc_clk);
 }
 
 static const struct of_device_id iproc_adc_of_match[] = {
-- 
2.43.0

[PATCH v4 4/6] iio: adc: bcm_iproc_adc: use devm-managed ADC cleanup

[mdshahid03]

From: Mohammad Shahid <mdshahid03@gmail.com>

Use devm_add_action_or_reset() to disable the ADC automatically when
the device is detached or probe fails.

This removes the manual ADC cleanup from the remove and error paths
and ties the ADC cleanup to the device lifetime.

Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
---
 drivers/iio/adc/bcm_iproc_adc.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
index d6f82f8ddee1..ff271c7fb2de 100644
--- a/drivers/iio/adc/bcm_iproc_adc.c
+++ b/drivers/iio/adc/bcm_iproc_adc.c
@@ -451,6 +451,11 @@ static void iproc_adc_disable(struct iio_dev *indio_dev)
 	}
 }
 
+static void iproc_adc_disable_action(void *indio_dev)
+{
+	iproc_adc_disable(indio_dev);
+}
+
 static int iproc_adc_read_raw(struct iio_dev *indio_dev,
 			  struct iio_chan_spec const *chan,
 			  int *val,
@@ -554,6 +559,10 @@ static int iproc_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = devm_add_action_or_reset(dev, iproc_adc_disable_action, indio_dev);
+	if (ret)
+		return ret;
+
 	indio_dev->name = "iproc-static-adc";
 	indio_dev->info = &iproc_adc_iio_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -561,17 +570,10 @@ static int iproc_adc_probe(struct platform_device *pdev)
 	indio_dev->num_channels = ARRAY_SIZE(iproc_adc_iio_channels);
 
 	ret = iio_device_register(indio_dev);
-	if (ret) {
-		dev_err(&pdev->dev, "iio_device_register failed:err %d\n", ret);
-		goto err_clk;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "iio_device_register failed\n");
 
 	return 0;
-
-err_clk:
-	iproc_adc_disable(indio_dev);
-
-	return ret;
 }
 
 static void iproc_adc_remove(struct platform_device *pdev)
@@ -579,7 +581,6 @@ static void iproc_adc_remove(struct platform_device *pdev)
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 
 	iio_device_unregister(indio_dev);
-	iproc_adc_disable(indio_dev);
 }
 
 static const struct of_device_id iproc_adc_of_match[] = {
-- 
2.43.0

[PATCH v4 5/6] iio: adc: bcm_iproc_adc: use devm-managed mutex initialization

[mdshahid03]

From: Mohammad Shahid <mdshahid03@gmail.com>

Use devm_mutex_init() to tie the mutex lifetime to the device and
improve debugging when CONFIG_DEBUG_MUTEXES is enabled.

Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
---
 drivers/iio/adc/bcm_iproc_adc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
index ff271c7fb2de..9881a3104c26 100644
--- a/drivers/iio/adc/bcm_iproc_adc.c
+++ b/drivers/iio/adc/bcm_iproc_adc.c
@@ -525,7 +525,9 @@ static int iproc_adc_probe(struct platform_device *pdev)
 	adc_priv = iio_priv(indio_dev);
 	platform_set_drvdata(pdev, indio_dev);
 
-	mutex_init(&adc_priv->mutex);
+	ret = devm_mutex_init(dev, &adc_priv->mutex);
+	if (ret)
+		return ret;
 
 	init_completion(&adc_priv->completion);
 
-- 
2.43.0

[PATCH v4 6/6] iio: adc: bcm_iproc_adc: use devm-managed IIO device registration

[mdshahid03]

From: Mohammad Shahid <mdshahid03@gmail.com>

Use devm_iio_device_register() to automatically unregister the IIO
device when the device is detached.

This removes the manual iio_device_unregister() call and makes the
iproc_adc_remove() callback unnecessary.

Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
---
 drivers/iio/adc/bcm_iproc_adc.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
index 9881a3104c26..ca81e0edd24d 100644
--- a/drivers/iio/adc/bcm_iproc_adc.c
+++ b/drivers/iio/adc/bcm_iproc_adc.c
@@ -523,7 +523,6 @@ static int iproc_adc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	adc_priv = iio_priv(indio_dev);
-	platform_set_drvdata(pdev, indio_dev);
 
 	ret = devm_mutex_init(dev, &adc_priv->mutex);
 	if (ret)
@@ -571,18 +570,7 @@ static int iproc_adc_probe(struct platform_device *pdev)
 	indio_dev->channels = iproc_adc_iio_channels;
 	indio_dev->num_channels = ARRAY_SIZE(iproc_adc_iio_channels);
 
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		return dev_err_probe(dev, ret, "iio_device_register failed\n");
-
-	return 0;
-}
-
-static void iproc_adc_remove(struct platform_device *pdev)
-{
-	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
-
-	iio_device_unregister(indio_dev);
+	return devm_iio_device_register(dev, indio_dev);
 }
 
 static const struct of_device_id iproc_adc_of_match[] = {
@@ -593,7 +581,6 @@ MODULE_DEVICE_TABLE(of, iproc_adc_of_match);
 
 static struct platform_driver iproc_adc_driver = {
 	.probe = iproc_adc_probe,
-	.remove = iproc_adc_remove,
 	.driver = {
 		.name = "iproc-static-adc",
 		.of_match_table = iproc_adc_of_match,
-- 
2.43.0

Re: [PATCH v4 0/6] iio: adc: bcm_iproc_adc: convert to devm-managed APIs

[Andy Shevchenko]

On Tue, Sep 08, 2026 at 10:53:53PM +0530, mdshahid03@gmail.com wrote:

> Changes in v4:
> - Move the ADC enable error-path cleanup simplification into the
>   clock conversion patch.
> - Simplify the ADC devm cleanup action.
> - Restore the blank line after the copyright header.

Cover letter is not only changelog, it also a summary of the series.
Patch wise LGTM,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

-- 
With Best Regards,
Andy Shevchenko