* [PATCH v3 0/3] arm64: dts: ti: use ti,am62-mcan compatible for m_can devices
@ 2026-09-12 21:32 Kendall Willis
2026-09-12 21:32 ` [PATCH v3 1/3] arm64: dts: ti: k3-am62: " Kendall Willis
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Kendall Willis @ 2026-09-12 21:32 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: s-kochidanadu, a-kaur, s-tripathi1, vishalm, k-willis,
linux-arm-kernel, devicetree, linux-kernel
This series prepends "ti,am62-mcan" compatible to the m_can devices in
the TI AM62 family of devices. By adding this compatible, this series
adds out-of-band wakeup support for m_can devices.
Dependency
----------
This series depends on the "can: m_can: introduce ti,am62-mcan compatible
for out-of-band wakeup" [1] series which implements the "ti,am62-mcan"
compatible in the m_can driver and dt bindings.
Testing
-------
Tested suspend/resume with CAN wakeup on AM62P SK EVM.
[1] https://lore.kernel.org/all/20260912-temp-v5-0-2e3201c02109@ti.com/
Signed-off-by: Kendall Willis <k-willis@ti.com>
---
Changes in v3:
- Renamed compatible from "ti,am62-m_can" to "ti,am62-mcan".
- Extended coverage to main domain m_can nodes in addition to MCU domain nodes.
- Link to v2: https://lore.kernel.org/r/20260902-smth-v2-0-b3678ca44c7b@ti.com
Changes in v2:
- Removed "out-band-wakeup" device tree property.
- Add "ti,am62-m_can" compatible to m_can devices.
- Link to v1: https://lore.kernel.org/r/20260820-smth-v1-0-e1738a38d58e@ti.com
---
Kendall Willis (3):
arm64: dts: ti: k3-am62: use ti,am62-mcan compatible for m_can devices
arm64: dts: ti: k3-am62a: use ti,am62-mcan compatible for m_can devices
arm64: dts: ti: k3-am62p: use ti,am62-mcan compatible for m_can devices
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi | 4 ++--
6 files changed, 10 insertions(+), 10 deletions(-)
---
base-commit: df2908090cda368b01ff43709f51890076c56157
change-id: 20260819-smth-6fb189fc148f
Best regards,
--
Kendall Willis <k-willis@ti.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v3 1/3] arm64: dts: ti: k3-am62: use ti,am62-mcan compatible for m_can devices
2026-09-12 21:32 [PATCH v3 0/3] arm64: dts: ti: use ti,am62-mcan compatible for m_can devices Kendall Willis
@ 2026-09-12 21:32 ` Kendall Willis
2026-09-12 21:32 ` [PATCH v3 2/3] arm64: dts: ti: k3-am62a: " Kendall Willis
2026-09-12 21:32 ` [PATCH v3 3/3] arm64: dts: ti: k3-am62p: " Kendall Willis
2 siblings, 0 replies; 4+ messages in thread
From: Kendall Willis @ 2026-09-12 21:32 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: s-kochidanadu, a-kaur, s-tripathi1, vishalm, k-willis,
linux-arm-kernel, devicetree, linux-kernel
Prepend "ti,am62-mcan" to the m_can device compatible property since
this compatible adds out-of-band wakeup functionality. The m_can pins
can be a wakeup source in the deepest low power states, despite being
in power domains which are OFF during deeper low power states since
it has the out-of-band wakeup capability.
Signed-off-by: Kendall Willis <k-willis@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index c5ee263d34a62ef46b416ffa45bc2ec5c28d010a..4c7e793d84a0e0f2ad3084ae41ae7ba97e8e2b62 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -933,7 +933,7 @@ eqep2: counter@23220000 {
};
main_mcan0: can@20701000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x20701000 0x00 0x200>,
<0x00 0x20708000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index 68e906796aefebc5eaaa5a231e56105a9cdd13e5..a21e3b889159b2ed8ea05af8543a589e96ff143d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -152,7 +152,7 @@ mcu_rti0: watchdog@4880000 {
};
mcu_mcan0: can@4e08000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x4e08000 0x00 0x200>,
<0x00 0x4e00000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
@@ -164,7 +164,7 @@ mcu_mcan0: can@4e08000 {
};
mcu_mcan1: can@4e18000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x4e18000 0x00 0x200>,
<0x00 0x4e10000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v3 2/3] arm64: dts: ti: k3-am62a: use ti,am62-mcan compatible for m_can devices
2026-09-12 21:32 [PATCH v3 0/3] arm64: dts: ti: use ti,am62-mcan compatible for m_can devices Kendall Willis
2026-09-12 21:32 ` [PATCH v3 1/3] arm64: dts: ti: k3-am62: " Kendall Willis
@ 2026-09-12 21:32 ` Kendall Willis
2026-09-12 21:32 ` [PATCH v3 3/3] arm64: dts: ti: k3-am62p: " Kendall Willis
2 siblings, 0 replies; 4+ messages in thread
From: Kendall Willis @ 2026-09-12 21:32 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: s-kochidanadu, a-kaur, s-tripathi1, vishalm, k-willis,
linux-arm-kernel, devicetree, linux-kernel
Prepend "ti,am62-mcan" to the m_can device compatible property since
this compatible adds out-of-band wakeup functionality. The m_can pins
can be a wakeup source in the deepest low power states, despite being
in power domains which are OFF during deeper low power states since
it has the out-of-band wakeup capability.
Signed-off-by: Kendall Willis <k-willis@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 9e5b75a4e88e23c74270b667a0a02d5efd931532..1552029fe4d4945b8fbe87792719c7ec7335bebb 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -848,7 +848,7 @@ mailbox0_cluster3: mailbox@29030000 {
};
main_mcan0: can@20701000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x20701000 0x00 0x200>,
<0x00 0x20708000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
index d22caa7c346b35dcb11163a5e73e17790ff751dd..b9a66e884434132dbfe93811578ca436e8c6103f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -152,7 +152,7 @@ mcu_rti0: watchdog@4880000 {
};
mcu_mcan0: can@4e08000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x4e08000 0x00 0x200>,
<0x00 0x4e00000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
@@ -164,7 +164,7 @@ mcu_mcan0: can@4e08000 {
};
mcu_mcan1: can@4e18000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x4e18000 0x00 0x200>,
<0x00 0x4e10000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v3 3/3] arm64: dts: ti: k3-am62p: use ti,am62-mcan compatible for m_can devices
2026-09-12 21:32 [PATCH v3 0/3] arm64: dts: ti: use ti,am62-mcan compatible for m_can devices Kendall Willis
2026-09-12 21:32 ` [PATCH v3 1/3] arm64: dts: ti: k3-am62: " Kendall Willis
2026-09-12 21:32 ` [PATCH v3 2/3] arm64: dts: ti: k3-am62a: " Kendall Willis
@ 2026-09-12 21:32 ` Kendall Willis
2 siblings, 0 replies; 4+ messages in thread
From: Kendall Willis @ 2026-09-12 21:32 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: s-kochidanadu, a-kaur, s-tripathi1, vishalm, k-willis,
linux-arm-kernel, devicetree, linux-kernel
Prepend "ti,am62-mcan" to the m_can device compatible property since
this compatible adds out-of-band wakeup functionality. The m_can pins
can be a wakeup source in the deepest low power states, despite being
in power domains which are OFF during deeper low power states since
it has the out-of-band wakeup capability.
Signed-off-by: Kendall Willis <k-willis@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index f130c7cb998d797f918e5017b4434496dca6067c..9e8d9246f61699c0788a50d21c1f3fd0f39b1741 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -883,7 +883,7 @@ eqep2: counter@23220000 {
};
main_mcan0: can@20701000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x20701000 0x00 0x200>,
<0x00 0x20708000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
@@ -898,7 +898,7 @@ main_mcan0: can@20701000 {
};
main_mcan1: can@20711000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x20711000 0x00 0x200>,
<0x00 0x20718000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
index 5288c959f3c1aecfde363f9e2440253545591171..3db8b63ef01fefd5177272a7e895317dc6d5921b 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -154,7 +154,7 @@ mcu_rti0: watchdog@4880000 {
};
mcu_mcan0: can@4e08000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x4e08000 0x00 0x200>,
<0x00 0x4e00000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
@@ -169,7 +169,7 @@ mcu_mcan0: can@4e08000 {
};
mcu_mcan1: can@4e18000 {
- compatible = "bosch,m_can";
+ compatible = "ti,am62-mcan", "bosch,m_can";
reg = <0x00 0x4e18000 0x00 0x200>,
<0x00 0x4e10000 0x00 0x8000>;
reg-names = "m_can", "message_ram";
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-09-12 21:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-12 21:32 [PATCH v3 0/3] arm64: dts: ti: use ti,am62-mcan compatible for m_can devices Kendall Willis
2026-09-12 21:32 ` [PATCH v3 1/3] arm64: dts: ti: k3-am62: " Kendall Willis
2026-09-12 21:32 ` [PATCH v3 2/3] arm64: dts: ti: k3-am62a: " Kendall Willis
2026-09-12 21:32 ` [PATCH v3 3/3] arm64: dts: ti: k3-am62p: " Kendall Willis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox