* [PATCH v2 2/2] arm64: dts: freescale: Add Toradex OSM iMX95
2026-09-17 10:20 [PATCH v2 0/2] arm64: dts: freescale: Add Toradex OSM iMX95 Francesco Dolcini
2026-09-17 10:20 ` [PATCH v2 1/2] dt-bindings: arm: fsl: " Francesco Dolcini
@ 2026-09-17 10:20 ` Francesco Dolcini
2026-09-23 20:37 ` [PATCH v2 0/2] " Frank.Li
2 siblings, 0 replies; 5+ messages in thread
From: Francesco Dolcini @ 2026-09-17 10:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Shawn Guo
Cc: Antoine Gouby, devicetree, linux-kernel, imx, linux-arm-kernel,
Franz Schnyder, Francesco Dolcini
From: Antoine Gouby <antoine.gouby@toradex.com>
Add support for the Toradex OSM iMX95 SoM, based on an NXP i.MX95 SoC,
and its OSM development carrier board.
Link: https://www.toradex.com/computer-on-modules/osm-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/osm-development-board
Co-developed-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Antoine Gouby <antoine.gouby@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
v2: removed unused pinctrl_pcie_wake from PCIe nodes
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx95-toradex-osm-dev.dts | 404 +++++++
.../boot/dts/freescale/imx95-toradex-osm.dtsi | 1032 +++++++++++++++++
3 files changed, 1437 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx95-toradex-osm-dev.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx95-toradex-osm.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 7944e3b32513..6ec0aff332ac 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -955,6 +955,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-frdm-pro.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-aquila-clover.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-aquila-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-osm-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596la-mba95xxca.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-osm-dev.dts b/arch/arm64/boot/dts/freescale/imx95-toradex-osm-dev.dts
new file mode 100644
index 000000000000..b3d54be07c43
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-toradex-osm-dev.dts
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/osm-arm-family/nxp-imx95
+ * https://www.toradex.com/products/carrier-board/osm-development-board
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95-toradex-osm.dtsi"
+
+/ {
+ model = "Toradex OSM iMX95 on OSM Development Board";
+ compatible = "toradex,osm-imx95-dev",
+ "toradex,osm-imx95",
+ "fsl,imx95";
+
+ aliases {
+ eeprom1 = &carrier_eeprom;
+ };
+
+ reg_carrier_1p8v: regulator-carrier-1p8v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "On-carrier 1V8";
+ };
+
+ sfp: sfp {
+ compatible = "sff,sfp";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_b0>, <&pinctrl_gpio_b1>,
+ <&pinctrl_gpio_b2>, <&pinctrl_gpio_b3>;
+ i2c-bus = <&i2c_mux_carrier_sfp>;
+ los-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
+ mod-def0-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ rate-select0-gpios = <&som_gpio_expander_0 4 GPIO_ACTIVE_HIGH>;
+ rate-select1-gpios = <&som_gpio_expander_1 3 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "verdin-wm8904";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "Microphone Jack", "MICBIAS",
+ "IN1L", "Microphone Jack";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack";
+
+ codec_dai: simple-audio-card,codec {
+ clocks = <&scmi_clk IMX95_CLK_SAI3>;
+ sound-dai = <&wm8904_1a>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+ };
+};
+
+/* OSM ADC_0, ADC_1 */
+&adc1 {
+ status = "okay";
+};
+
+/* OSM ETH_A */
+&enetc_port0 {
+ phy-handle = <ðphy_a>;
+ phy-mode = "rgmii-id";
+
+ status = "okay";
+};
+
+/* OSM ETH_B */
+&enetc_port1 {
+ phy-handle = <ðphy_b>;
+ phy-mode = "rgmii-id";
+
+ status = "okay";
+};
+
+/* OSM ETH_C */
+&enetc_port2 {
+ managed = "in-band-status";
+ phy-mode = "10gbase-r";
+ sfp = <&sfp>;
+
+ status = "okay";
+};
+
+/* OSM CAN_A */
+&flexcan2 {
+ status = "okay";
+};
+
+/* OSM CAN_B */
+&flexcan3 {
+ status = "okay";
+};
+
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_a1>, <&pinctrl_gpio_a2>, <&pinctrl_gpio_a3>,
+ <&pinctrl_gpio_a4>, <&pinctrl_gpio_a5>, <&pinctrl_gpio_a6>;
+};
+
+/* OSM I2C_A */
+&lpi2c1 {
+ status = "okay";
+
+ fan_controller: fan-controller@19 {
+ compatible = "ti,amc6821";
+ reg = <0x19>;
+ #pwm-cells = <2>;
+
+ fan {
+ cooling-levels = <255>;
+ pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+ };
+ };
+
+ wm8904_1a: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&scmi_clk IMX95_CLK_SAI3>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ AVDD-supply = <®_carrier_1p8v>;
+ CPVDD-supply = <®_carrier_1p8v>;
+ DBVDD-supply = <®_carrier_1p8v>;
+ DCVDD-supply = <®_carrier_1p8v>;
+ MICVDD-supply = <®_carrier_1p8v>;
+ };
+
+ gpio@20 {
+ compatible = "nxp,pcal6408";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names =
+ "PWR_CTRL_CAN_A", /* 0 */
+ "PWR_CTRL_CAN_B",
+ "PWR_CTRL_USB-HUB",
+ "LVDS_MUX_CTRL",
+ "USB_MUX_CTRL",
+ "I2CA_IOEXP_P5",
+ "I2CA_IOEXP_P6",
+ "I2CA_IOEXP_P7";
+
+ lvds_mux_ctrl: lvds-mux-ctrl-hog {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ line-name = "LVDS_MUX_CTRL";
+ output-low;
+ };
+
+ usb_mux_ctrl: usb-mux-ctrl-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ line-name = "USB_MUX_CTRL";
+ output-high;
+ };
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina219";
+ reg = <0x40>;
+ shunt-resistor = <10000>;
+ };
+
+ temperature-sensor@4f {
+ compatible = "ti,tmp1075";
+ reg = <0x4f>;
+ };
+
+ tcpc@52 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x52>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_a0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB_A";
+ op-sink-microwatt = <0>;
+ power-role = "dual";
+ try-power-role = "sink";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+ port {
+ usb_c_a_conn_hs: endpoint {
+ remote-endpoint = <&usb_a_hs>;
+ };
+ };
+ };
+ };
+
+ carrier_eeprom: eeprom@57 {
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+/* OSM I2C_B */
+&lpi2c5 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c_mux_carrier_cam_a: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c_mux_carrier_lvds: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* I2C on DSI connector pin #4 and #6 */
+ i2c_mux_carrier_dsi_1: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* I2C on DSI connector pin #52 and #54 */
+ i2c_mux_carrier_dsi_2: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c_mux_carrier_cam_b: i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c_mux_carrier_sfp: i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+/* OSM SPI_A */
+&lpspi4 {
+ status = "okay";
+};
+
+/* OSM UART_CON, used as the Linux Console */
+&lpuart1 {
+ status = "okay";
+};
+
+/* OSM UART_D */
+&lpuart2 {
+ status = "okay";
+};
+
+/* OSM UART_C */
+&lpuart3 {
+ status = "okay";
+};
+
+/* OSM UART_B */
+&lpuart5 {
+ status = "okay";
+};
+
+/* OSM UART_A */
+&lpuart6 {
+ status = "okay";
+};
+
+&netc_blk_ctrl {
+ status = "okay";
+};
+
+/* OSM MDIO, shared between all ethernet ports */
+&netc_emdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio>;
+
+ status = "okay";
+
+ ethphy_a: ethernet-phy@2 {
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_a7>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ };
+
+ ethphy_b: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ };
+};
+
+&netc_timer {
+ status = "okay";
+};
+
+&netcmix_blk_ctrl {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+/* OSM I2S_A */
+&sai3 {
+ status = "okay";
+};
+
+/* OSM PWM_0 */
+&tpm3 {
+ status = "okay";
+};
+
+/* OSM PWM_1 */
+&tpm4 {
+ status = "okay";
+};
+
+/* OSM PWM_2 */
+&tpm5 {
+ status = "okay";
+};
+
+/* OSM PWM_3 */
+&tpm6 {
+ status = "okay";
+};
+
+/* OSM USB_A */
+&usb2 {
+ status = "okay";
+
+ port {
+ usb_a_hs: endpoint {
+ remote-endpoint = <&usb_c_a_conn_hs>;
+ };
+ };
+};
+
+/* OSM USB_C */
+&usb3 {
+ status = "okay";
+};
+
+&usb3_phy {
+ status = "okay";
+};
+
+/* OSM SDIO_A */
+&usdhc2 {
+ status = "okay";
+};
+
+/* OSM SDIO_B */
+&usdhc3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-osm.dtsi b/arch/arm64/boot/dts/freescale/imx95-toradex-osm.dtsi
new file mode 100644
index 000000000000..8eb7ea4ed9ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-toradex-osm.dtsi
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex OSM iMX95 SoM
+ *
+ * https://www.toradex.com/computer-on-modules/osm-arm-family/nxp-imx95
+ */
+
+#include "imx95.dtsi"
+
+/ {
+ aliases {
+ can0 = &flexcan2;
+ can1 = &flexcan3;
+ eeprom0 = &som_eeprom;
+ ethernet0 = &enetc_port0;
+ ethernet1 = &enetc_port1;
+ ethernet2 = &enetc_port2;
+ i2c0 = &lpi2c3;
+ i2c1 = &lpi2c1;
+ i2c2 = &lpi2c5;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ rtc0 = &rtc_i2c;
+ rtc1 = &scmi_bbm;
+ serial0 = &lpuart1;
+ serial1 = &lpuart6;
+ serial2 = &lpuart5;
+ serial3 = &lpuart3;
+ serial4 = &lpuart2;
+ usb0 = &usb2;
+ usb1 = &usb3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clk_serdes_eth_ref: clock-eth-ref {
+ compatible = "gpio-gate-clock";
+ #clock-cells = <0>;
+ /* CTRL_ETH_REF_CLK_STBY# */
+ enable-gpios = <&som_gpio_expander_0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "On-module +V1.8";
+ };
+
+ reg_usb_a_vbus: regulator-usb-a-vbus {
+ compatible = "regulator-fixed";
+ /* OSM USB_A_EN (OSM_AC16) */
+ gpios = <&som_gpio_expander_0 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "USB_A_EN";
+ };
+
+ reg_usb_c_vbus: regulator-usb-c-vbus {
+ compatible = "regulator-fixed";
+ /* OSM USB_C_EN (OSM_C10) */
+ gpios = <&som_gpio_expander_0 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "USB_C_EN";
+ };
+
+ reg_sdio_a_vmmc: regulator-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdio_a_pwr_en>;
+ gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <100000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "SDIO_A_PWR_EN";
+ startup-delay-us = <20000>;
+ };
+
+ reg_sdio_a_vqmmc: regulator-usdhc2-vqmmc {
+ compatible = "regulator-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdio_a_vsel>;
+ gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "PMIC_SDIO_A_VSEL";
+ states = <1800000 0x1>, <3300000 0x0>;
+ };
+
+ remoteproc-cm7 {
+ compatible = "fsl,imx95-cm7";
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu7 0 1 &mu7 1 1 &mu7 3 1>;
+ memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>, <&m7_reserved>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux_cma: linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0x80000000 0 0x7f000000>;
+ linux,cma-default;
+ reusable;
+ size = <0 0x3c000000>;
+ };
+
+ m7_reserved: memory@80000000 {
+ reg = <0 0x80000000 0 0x1000000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@88000000 {
+ reg = <0 0x88000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@88008000 {
+ reg = <0 0x88008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@88010000 {
+ reg = <0 0x88010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@88018000 {
+ reg = <0 0x88018000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@88020000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x88020000 0 0x100000>;
+ no-map;
+ };
+
+ rsc_table: rsc-table@88220000 {
+ reg = <0 0x88220000 0 0x1000>;
+ no-map;
+ };
+ };
+};
+
+/* OSM ADC_0, ADC_1 */
+&adc1 {
+ vref-supply = <®_1p8v>;
+};
+
+/* OSM ETH_A */
+&enetc_port0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eth_a>;
+};
+
+/* OSM ETH_B */
+&enetc_port1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eth_b>;
+};
+
+/* OSM ETH_C */
+&enetc_port2 {
+ clocks = <&clk_serdes_eth_ref>;
+ clock-names = "ref";
+};
+
+/* OSM CAN_A */
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_a>;
+};
+
+/* OSM CAN_B */
+&flexcan3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_b>;
+};
+
+&gpio1 {
+ gpio-line-names =
+ "OSM_AA15", /* 0 */
+ "OSM_AA16",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "OSM_F19",
+ "OSM_AA23",
+ "OSM_G19", /* 10 */
+ "OSM_L17"; /* OSM GPIO_A_7/SPI_B_CS1# */
+
+ status = "okay";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "OSM_AA21",
+ "OSM_AA20",
+ "",
+ "",
+ "",
+ "",
+ "I2C_SOM_SDA",
+ "I2C_SOM_SCL";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "OSM_J21", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "OSM_D21",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "PMIC_SDIO_A_VSEL";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "CTRL_GPIO_EXP_INT#",
+ "OSM_T2";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "OSM_D17", /* OSM GPIO_A_0 */
+ "OSM_E17", /* OSM GPIO_A_1 */
+ "OSM_F17", /* OSM GPIO_A_2 */
+ "OSM_G17", /* OSM GPIO_A_3 */
+ "",
+ "",
+ "",
+ "",
+ "OSM_E19",
+ "OSM_H17", /* OSM GPIO_A_4 */
+ "OSM_J17", /* OSM GPIO_A_5 */
+ "OSM_D19",
+ "",
+ "OSM_K17", /* OSM GPIO_A_6/SPI_A_CS1# */
+ "OSM_Y15";
+};
+
+/* OSM I2C_A */
+&lpi2c1 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c_a>;
+ pinctrl-1 = <&pinctrl_i2c_a_gpio>;
+ clock-frequency = <100000>;
+ scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* I2C_SOM */
+&lpi2c3 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c_som>, <&pinctrl_ctrl_gpio_exp_int>;
+ pinctrl-1 = <&pinctrl_i2c_som_gpio>, <&pinctrl_ctrl_gpio_exp_int>;
+ clock-frequency = <400000>;
+ scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ status = "okay";
+
+ som_gpio_expander_0: gpio@20 {
+ compatible = "nxp,pcal6416";
+ reg = <0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio4>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names =
+ "OSM_AC16", /* 0 */
+ "OSM_AC15",
+ "OSM_C10",
+ "OSM_C8",
+ "OSM_H19", /* OSM GPIO_B_4 */
+ "OSM_J19", /* OSM GPIO_B_5 */
+ "OSM_K19", /* OSM GPIO_B_6 */
+ "OSM_L19", /* OSM GPIO_B_7 */
+ "OSM_V2",
+ "OSM_L33",
+ "OSM_AN23", /* 10 */
+ "OSM_AN14",
+ "USB_RECOVERY_CTRL#",
+ "CTRL_ETH_REF_CLK_STBY#",
+ "CTRL_DSI_EN/CSI_EN#",
+ "SPI_B_TPM_CS#";
+
+ /*
+ * Switch USB to default position:
+ * - SoC USB2 -> OSM USB_A
+ * - SoC USB1 -> OSM USB_C
+ * Reset configuration:
+ * - SoC USB1 -> OSM USB_A (USB recovery)
+ * - SoC USB2 not connected
+ */
+ usb_recov_ctrl: usb-recov-ctrl-hog {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ line-name = "USB_RECOVERY_CTRL#";
+ output-high;
+ };
+ };
+
+ som_gpio_expander_1: gpio@21 {
+ compatible = "nxp,pcal6416";
+ reg = <0x21>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio4>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names =
+ "OSM_D3", /* OSM GPIO_C_0 */
+ "OSM_D4", /* OSM GPIO_C_1 */
+ "OSM_E3", /* OSM GPIO_C_2/CAM_B_PWR */
+ "OSM_E4", /* OSM GPIO_C_3/CAM_B_RST# */
+ "OSM_F3", /* OSM GPIO_C_4/DISP_VDD_EN */
+ "OSM_F4", /* OSM GPIO_C_5/DISP_BL_EN */
+ "OSM_G3", /* OSM GPIO_C_6/CAM_A_PWR */
+ "OSM_G4", /* OSM GPIO_C_7/CAM_A_RST# */
+ "OSM_U32",
+ "OSM_U33",
+ "OSM_V32", /* 10 */
+ "OSM_V33",
+ "OSM_W32",
+ "OSM_W33",
+ "OSM_Y32",
+ "OSM_Y33";
+ };
+
+ rtc_i2c: rtc@32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp1075";
+ reg = <0x48>;
+ };
+
+ som_eeprom: eeprom@50 {
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+/* OSM I2C_B */
+&lpi2c5 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c_b>;
+ pinctrl-1 = <&pinctrl_i2c_b_gpio>;
+ clock-frequency = <100000>;
+ scl-gpios = <&gpio2 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* OSM SPI_B */
+&lpspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi_b>, <&pinctrl_spi_b_cs0_gpio>;
+ cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>,
+ <&som_gpio_expander_0 15 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+
+ som_tpm: tpm@1 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ /*
+ * Maximum TPM-supported speed is 18.5 MHz, limited to 12 MHz
+ * here as lpspi1's per-clock (twice the max speed) is 24 MHz
+ */
+ spi-max-frequency = <12000000>;
+ };
+};
+
+/* OSM SPI_A */
+&lpspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi_a>, <&pinctrl_spi_a_cs0_gpio>;
+ cs-gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+};
+
+/* OSM UART_CON, used as the Linux Console */
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart_con>;
+};
+
+/* OSM UART_D */
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart_d>;
+};
+
+/* OSM UART_C */
+&lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart_c>;
+};
+
+/* OSM UART_B */
+&lpuart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart_b>;
+ uart-has-rtscts;
+};
+
+/* OSM UART_A */
+&lpuart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart_a>;
+ uart-has-rtscts;
+};
+
+&mu7 {
+ status = "okay";
+};
+
+/* OSM PCIE_A */
+&pcie0 {
+ /* PCIE_A_PERST# (OSM V2) */
+ reset-gpios = <&som_gpio_expander_0 8 GPIO_ACTIVE_LOW>;
+};
+
+/* OSM PCIE_B */
+&pcie1 {
+ /* PCIE_B_PERST# (OSM L33) */
+ reset-gpios = <&som_gpio_expander_0 9 GPIO_ACTIVE_LOW>;
+};
+
+/* OSM I2S_A */
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_a>, <&pinctrl_i2s_mclk>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_SAI3>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>,
+ <393216000>,
+ <361267200>,
+ <12288000>;
+ #sound-dai-cells = <0>;
+ fsl,sai-mclk-direction-output;
+};
+
+/* OSM I2S_B */
+&sai5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_b>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_SAI5>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>,
+ <393216000>,
+ <361267200>,
+ <12288000>;
+ #sound-dai-cells = <0>;
+ fsl,sai-mclk-direction-output;
+};
+
+&scmi_bbm {
+ linux,code = <KEY_POWER>;
+};
+
+&thermal_zones {
+ /* PF09 Main PMIC */
+ pf09-thermal {
+ polling-delay = <2000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&scmi_sensor 2>;
+
+ trips {
+ trip0 {
+ hysteresis = <2000>;
+ temperature = <155000>;
+ type = "critical";
+ };
+ };
+ };
+
+ /* PF53 VDD_ARM PMIC */
+ pf53-arm-thermal {
+ polling-delay = <2000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&scmi_sensor 4>;
+
+ trips {
+ trip0 {
+ hysteresis = <2000>;
+ temperature = <155000>;
+ type = "critical";
+ };
+ };
+ };
+
+ /* PF53 VDD_SOC PMIC */
+ pf53-soc-thermal {
+ polling-delay = <2000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&scmi_sensor 3>;
+
+ trips {
+ trip0 {
+ hysteresis = <2000>;
+ temperature = <155000>;
+ type = "critical";
+ };
+ };
+ };
+};
+
+/* OSM PWM_0 */
+&tpm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+/* OSM PWM_1 */
+&tpm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+/* OSM PWM_2 */
+&tpm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+/* OSM PWM_3 */
+&tpm6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+/* OSM USB_A */
+&usb2 {
+ adp-disable;
+ disable-over-current;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ usb-role-switch;
+ vbus-supply = <®_usb_a_vbus>;
+};
+
+/* OSM USB_C */
+&usb3 {
+ fsl,disable-port-power-control;
+};
+
+&usb3_dwc3 {
+ dr_mode = "host";
+};
+
+&usb3_phy {
+ vbus-supply = <®_usb_c_vbus>;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_emmc>;
+ pinctrl-1 = <&pinctrl_emmc>;
+ pinctrl-2 = <&pinctrl_emmc_200mhz>;
+ no-sd;
+ no-sdio;
+ non-removable;
+
+ status = "okay";
+};
+
+/* OSM SDIO_A */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_sdio_a>, <&pinctrl_sdio_a_cd>;
+ pinctrl-1 = <&pinctrl_sdio_a>, <&pinctrl_sdio_a_cd>;
+ pinctrl-2 = <&pinctrl_sdio_a_200mhz>, <&pinctrl_sdio_a_cd>;
+ pinctrl-3 = <&pinctrl_sdio_a_sleep>, <&pinctrl_sdio_a_cd>;
+ cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ vmmc-supply = <®_sdio_a_vmmc>;
+ vqmmc-supply = <®_sdio_a_vqmmc>;
+};
+
+/* OSM SDIO_B */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_sdio_b>;
+ pinctrl-1 = <&pinctrl_sdio_b>;
+ pinctrl-2 = <&pinctrl_sdio_b_200mhz>;
+ disable-wp;
+};
+
+&wdog3 {
+ fsl,ext-reset-output;
+
+ status = "okay";
+};
+
+&scmi_iomuxc {
+ /* OSM MDIO, shared between all ethernet ports */
+ pinctrl_mdio: emdiogrp {
+ fsl,pins = <IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x50e>, /* OSM T16 */
+ <IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x90e>; /* OSM T15 */
+ };
+
+ /* OSM ETH_A */
+ pinctrl_eth_a: enetc0grp {
+ fsl,pins = <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e>, /* OSM K16 */
+ <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e>, /* OSM J15 */
+ <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x50e>, /* OSM H15 */
+ <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x50e>, /* OSM G15 */
+ <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x50e>, /* OSM H16 */
+ <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x50e>, /* OSM G16 */
+ <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e>, /* OSM M15 */
+ <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e>, /* OSM R15 */
+ <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e>, /* OSM K15 */
+ <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e>, /* OSM L15 */
+ <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e>, /* OSM N15 */
+ <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e>; /* OSM P15 */
+ };
+
+ /* OSM ETH_B */
+ pinctrl_eth_b: enetc1grp {
+ fsl,pins = <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x57e>, /* OSM J2 */
+ <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x58e>, /* OSM H1 */
+ <IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x50e>, /* OSM G1 */
+ <IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x50e>, /* OSM F1 */
+ <IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x50e>, /* OSM G2 */
+ <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x50e>, /* OSM F2 */
+ <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x57e>, /* OSM L1 */
+ <IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x58e>, /* OSM P1 */
+ <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x57e>, /* OSM J1 */
+ <IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x57e>, /* OSM K1 */
+ <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x57e>, /* OSM M1 */
+ <IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x57e>; /* OSM N1 */
+ };
+
+ /* OSM CAN_A */
+ pinctrl_can_a: flexcan2grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO25__CAN2_TX 0x39e>, /* OSM AC17 */
+ <IMX95_PAD_GPIO_IO27__CAN2_RX 0x39e>; /* OSM AB17 */
+ };
+
+ /* OSM CAN_B */
+ pinctrl_can_b: flexcan3grp {
+ fsl,pins = <IMX95_PAD_CCM_CLKO3__CAN3_TX 0x39e>, /* OSM AC19 */
+ <IMX95_PAD_CCM_CLKO4__CAN3_RX 0x39e>; /* OSM AB19 */
+ };
+
+ /* OSM GPIO_B_2 */
+ pinctrl_gpio_b2: gpio1io8grp {
+ fsl,pins = <IMX95_PAD_PDM_CLK__AONMIX_TOP_GPIO1_IO_BIT8 0x31e>; /* OSM F19 */
+ };
+
+ /* OSM SPI_B_CS0# */
+ pinctrl_spi_b_cs0_gpio: gpio1io9grp {
+ fsl,pins = <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_GPIO1_IO_BIT9 0x3fe>; /* OSM AA23 */
+ };
+
+ /* OSM GPIO_B_3 */
+ pinctrl_gpio_b3: gpio1io10grp {
+ fsl,pins = <IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10 0x31e>; /* OSM G19 */
+ };
+
+ /* OSM GPIO_A_7/SPI_B_CS1# */
+ pinctrl_gpio_a7: gpio1io11grp {
+ fsl,pins = <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11 0x31e>; /* OSM L17 */
+ };
+
+ /* OSM PWM_0 as GPIO */
+ pinctrl_pwm0_gpio: gpio2io12grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO12__GPIO2_IO_BIT12 0x31e>; /* OSM E18 */
+ };
+
+ /* OSM GPIO_A_0 */
+ pinctrl_gpio_a0: gpio5io0grp {
+ fsl,pins = <IMX95_PAD_XSPI1_DATA0__GPIO5_IO_BIT0 0x31e>; /* OSM D17 */
+ };
+
+ /* OSM GPIO_A_1 */
+ pinctrl_gpio_a1: gpio5io1grp {
+ fsl,pins = <IMX95_PAD_XSPI1_DATA1__GPIO5_IO_BIT1 0x31e>; /* OSM E17 */
+ };
+
+ /* OSM GPIO_A_2 */
+ pinctrl_gpio_a2: gpio5io2grp {
+ fsl,pins = <IMX95_PAD_XSPI1_DATA2__GPIO5_IO_BIT2 0x31e>; /* OSM F17 */
+ };
+
+ /* OSM GPIO_A_3 */
+ pinctrl_gpio_a3: gpio5io3grp {
+ fsl,pins = <IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3 0x31e>; /* OSM G17 */
+ };
+
+ /* OSM GPIO_B_1 */
+ pinctrl_gpio_b1: gpio5io8grp {
+ fsl,pins = <IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8 0x31e>; /* OSM E19 */
+ };
+
+ /* OSM GPIO_A_4 */
+ pinctrl_gpio_a4: gpio5io9grp {
+ fsl,pins = <IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9 0x31e>; /* OSM H17 */
+ };
+
+ /* OSM GPIO_A_5 */
+ pinctrl_gpio_a5: gpio5io10grp {
+ fsl,pins = <IMX95_PAD_XSPI1_SS0_B__GPIO5_IO_BIT10 0x31e>; /* OSM J17 */
+ };
+
+ /* OSM GPIO_B_0 */
+ pinctrl_gpio_b0: gpio5io11grp {
+ fsl,pins = <IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x31e>; /* OSM D19 */
+ };
+
+ /* OSM GPIO_A_6/SPI_A_CS1# */
+ pinctrl_gpio_a6: gpio5io13grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x31e>; /* OSM K17 */
+ };
+
+ /* OSM SPI_A_CS0# */
+ pinctrl_spi_a_cs0_gpio: gpio5io14grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x3fe>; /* OSM Y15 */
+ };
+
+ pinctrl_ctrl_gpio_exp_int: gpioexpintgrp {
+ fsl,pins = <IMX95_PAD_ENET2_MDC__GPIO4_IO_BIT14 0x31e>; /* CTRL_GPIO_EXP_INT# */
+ };
+
+ /* OSM I2C_A as GPIOs */
+ pinctrl_i2c_a_gpio: lpi2c1gpiogrp {
+ fsl,pins = <IMX95_PAD_I2C1_SDA__AONMIX_TOP_GPIO1_IO_BIT1 0x40000b9e>, /* OSM AA16 */
+ <IMX95_PAD_I2C1_SCL__AONMIX_TOP_GPIO1_IO_BIT0 0x40000b9e>; /* OSM AA15 */
+ };
+
+ /* OSM I2C_A */
+ pinctrl_i2c_a: lpi2c1grp {
+ fsl,pins = <IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x40000b9e>, /* OSM AA16 */
+ <IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x40000b9e>; /* OSM AA15 */
+ };
+
+ /* I2C_SOM (On-module I2C) as GPIOs */
+ pinctrl_i2c_som_gpio: lpi2c3gpiogrp {
+ fsl,pins = <IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28 0x40001b9e>, /* I2C_SOM_SDA */
+ <IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29 0x40001b9e>; /* I2C_SOM_SCL */
+ };
+
+ /* I2C_SOM (On-module I2C) */
+ pinctrl_i2c_som: lpi2c3grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40001b9e>, /* I2C_SOM_SDA */
+ <IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40001b9e>; /* I2C_SOM_SCL */
+ };
+
+ /* OSM I2C_B as GPIOs */
+ pinctrl_i2c_b_gpio: lpi2c5gpiogrp {
+ fsl,pins = <IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22 0x40001b9e>, /* OSM AA21 */
+ <IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23 0x40001b9e>; /* OSM AA20 */
+ };
+
+ /* OSM I2C_B */
+ pinctrl_i2c_b: lpi2c5grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO22__LPI2C5_SDA 0x40001b9e>, /* OSM AA21 */
+ <IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40001b9e>; /* OSM AA20 */
+ };
+
+ /* OSM SPI_B */
+ pinctrl_spi_b: lpspi1grp {
+ fsl,pins = <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPSPI1_SCK 0x3fe>, /* OSM Y21 */
+ <IMX95_PAD_SAI1_RXD0__AONMIX_TOP_LPSPI1_SOUT 0x3fe>, /* OSM Y23 */
+ <IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPSPI1_SIN 0x3fe>; /* OSM Y22 */
+ };
+
+ /* OSM SPI_A */
+ pinctrl_spi_a: lpspi4grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO37__LPSPI4_SCK 0x3fe>, /* OSM U16 */
+ <IMX95_PAD_GPIO_IO36__LPSPI4_SOUT 0x3fe>, /* OSM V15 */
+ <IMX95_PAD_GPIO_IO35__LPSPI4_SIN 0x3fe>; /* OSM U15 */
+ };
+
+ /* OSM UART_CON */
+ pinctrl_uart_con: lpuart1grp {
+ fsl,pins = <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e>, /* OSM D23 */
+ <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e>; /* OSM D22 */
+ };
+
+ /* OSM UART_D */
+ pinctrl_uart_d: lpuart2grp {
+ fsl,pins = <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX 0x31e>, /* OSM C23 */
+ <IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX 0x31e>; /* OSM C22 */
+ };
+
+ /* OSM UART_C */
+ pinctrl_uart_c: lpuart3grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO14__LPUART3_TX 0x31e>, /* OSM B23 */
+ <IMX95_PAD_GPIO_IO15__LPUART3_RX 0x31e>; /* OSM A22 */
+ };
+
+ /* OSM UART_B */
+ pinctrl_uart_b: lpuart5grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO00__LPUART5_TX 0x31e>, /* OSM D13 */
+ <IMX95_PAD_GPIO_IO01__LPUART5_RX 0x31e>, /* OSM D14 */
+ <IMX95_PAD_GPIO_IO02__LPUART5_CTS_B 0x31e>, /* OSM D16 */
+ <IMX95_PAD_GPIO_IO03__LPUART5_RTS_B 0x31e>; /* OSM D15 */
+ };
+
+ /* OSM UART_A */
+ pinctrl_uart_a: lpuart6grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO04__LPUART6_TX 0x31e>, /* OSM B13 */
+ <IMX95_PAD_GPIO_IO05__LPUART6_RX 0x31e>, /* OSM A14 */
+ <IMX95_PAD_GPIO_IO06__LPUART6_CTS_B 0x31e>, /* OSM C14 */
+ <IMX95_PAD_GPIO_IO07__LPUART6_RTS_B 0x31e>; /* OSM C13 */
+ };
+
+ /* OSM PCIE_WAKE# */
+ pinctrl_pcie_wake: pciewakegrp {
+ fsl,pins = <IMX95_PAD_ENET2_MDIO__GPIO4_IO_BIT15 0x31e>; /* OSM T2 */
+ };
+
+ /* OSM I2S_A */
+ pinctrl_i2s_a: sai3grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x11e>, /* OSM W20 */
+ <IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x11e>, /* OSM V21 */
+ <IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x11e>, /* OSM W21 */
+ <IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x11e>; /* OSM W18 */
+ };
+
+ /* OSM I2S_MCLK */
+ pinctrl_i2s_mclk: sai3mclkgrp {
+ fsl,pins = <IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x31e>; /* OSM V18 */
+ };
+
+ /* OSM I2S_B */
+ pinctrl_i2s_b: sai5grp {
+ fsl,pins = <IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK 0x11e>, /* OSM T19 */
+ <IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0 0x11e>, /* OSM V19 */
+ <IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0 0x11e>, /* OSM W19 */
+ <IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC 0x11e>; /* OSM T18 */
+ };
+
+ /* OSM PWM_0 */
+ pinctrl_pwm0: tpm3ch2grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO12__TPM3_CH2 0x51e>; /* OSM E18 */
+ };
+
+ /* OSM PWM_1 */
+ pinctrl_pwm1: tpm4ch2grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO13__TPM4_CH2 0x51e>; /* OSM F18 */
+ };
+
+ /* OSM PWM_2 */
+ pinctrl_pwm2: tpm5ch2grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO18__TPM5_CH2 0x51e>; /* OSM G18 */
+ };
+
+ /* OSM PWM_3 */
+ pinctrl_pwm3: tpm6ch2grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO19__TPM6_CH2 0x51e>; /* OSM H18 */
+ };
+
+ /* On-module eMMC (max 200MHz) */
+ pinctrl_emmc_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe>, /* eMMC_CLK */
+ <IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe>, /* eMMC_CMD */
+ <IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe>, /* eMMC_DATA0 */
+ <IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe>, /* eMMC_DATA1 */
+ <IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe>, /* eMMC_DATA2 */
+ <IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe>, /* eMMC_DATA3 */
+ <IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe>, /* eMMC_DATA4 */
+ <IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe>, /* eMMC_DATA5 */
+ <IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe>, /* eMMC_DATA6 */
+ <IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe>, /* eMMC_DATA7 */
+ <IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe>; /* eMMC_STROBE */
+ };
+
+ /* On-module eMMC (max 100MHz) */
+ pinctrl_emmc: usdhc1grp {
+ fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e>, /* eMMC_CLK */
+ <IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e>, /* eMMC_CMD */
+ <IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e>, /* eMMC_DATA0 */
+ <IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e>, /* eMMC_DATA1 */
+ <IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e>, /* eMMC_DATA2 */
+ <IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e>, /* eMMC_DATA3 */
+ <IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e>, /* eMMC_DATA4 */
+ <IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e>, /* eMMC_DATA5 */
+ <IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e>, /* eMMC_DATA6 */
+ <IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e>, /* eMMC_DATA7 */
+ <IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e>; /* eMMC_STROBE */
+ };
+
+ /* OSM SDIO_A (max 200MHz) */
+ pinctrl_sdio_a_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe>, /* OSM F21 */
+ <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe>, /* OSM E20 */
+ <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe>, /* OSM G20 */
+ <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe>, /* OSM G21 */
+ <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe>, /* OSM H20 */
+ <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe>; /* OSM H21 */
+ };
+
+ /* OSM SDIO_A_CD# */
+ pinctrl_sdio_a_cd: usdhc2-cdgrp {
+ fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x1100>; /* OSM J21 */
+ };
+
+ /* OSM SDIO_A_PWR_EN */
+ pinctrl_sdio_a_pwr_en: usdhc2-pwrengrp {
+ fsl,pins = <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x11e>; /* OSM D21 */
+ };
+
+ /* OSM SDIO_A (sleep mode) */
+ pinctrl_sdio_a_sleep: usdhc2-sleepgrp {
+ fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x400>, /* OSM F21 */
+ <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x400>, /* OSM E20 */
+ <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x400>, /* OSM G20 */
+ <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x400>, /* OSM G21 */
+ <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x400>, /* OSM H20 */
+ <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x400>; /* OSM H21 */
+ };
+
+ /* PMIC_SDIO_A_VSEL */
+ pinctrl_sdio_a_vsel: usdhc2-vselgrp {
+ fsl,pins = <IMX95_PAD_SD2_VSELECT__GPIO3_IO_BIT19 0x4>; /* PMIC_SDIO_A_VSEL */
+ };
+
+ /* OSM SDIO_A (max 100MHz) */
+ pinctrl_sdio_a: usdhc2grp {
+ fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e>, /* OSM F21 */
+ <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e>, /* OSM E20 */
+ <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e>, /* OSM G20 */
+ <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e>, /* OSM G21 */
+ <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e>, /* OSM H20 */
+ <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e>; /* OSM H21 */
+ };
+
+ /* OSM SDIO_B (max 200MHz) */
+ pinctrl_sdio_b_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <IMX95_PAD_SD3_CLK__USDHC3_CLK 0x15fe>, /* OSM K20 */
+ <IMX95_PAD_SD3_CMD__USDHC3_CMD 0x13fe>, /* OSM K21 */
+ <IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe>, /* OSM L20 */
+ <IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe>, /* OSM L21 */
+ <IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe>, /* OSM M21 */
+ <IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe>; /* OSM N20 */
+ };
+
+ /* OSM SDIO_B (max 100MHz) */
+ pinctrl_sdio_b: usdhc3grp {
+ fsl,pins = <IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e>, /* OSM K20 */
+ <IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e>, /* OSM K21 */
+ <IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e>, /* OSM L20 */
+ <IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e>, /* OSM L21 */
+ <IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e>, /* OSM M21 */
+ <IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e>; /* OSM N20 */
+ };
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 5+ messages in thread