From: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <Frank.Li@nxp.com>, <s.hauer@pengutronix.de>,
<kernel@pengutronix.de>, <festevam@gmail.com>,
<andersson@kernel.org>, <geert@linux-m68k.org>,
<dmitry.baryshkov@oss.qualcomm.com>, <arnd@arndb.de>,
<ebiggers@kernel.org>, <luca.weiss@fairphone.com>,
<michal.simek@amd.com>, <sven@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<imx@lists.linux.dev>, <r-donadkar@ti.com>, <devarsht@ti.com>,
<u-kumar1@ti.com>
Subject: [PATCH v3 16/18] arm64: dts: ti: k3-j721e: Add overlay for DS90UB954-Q1EVM
Date: Wed, 23 Sep 2026 15:04:57 +0530 [thread overview]
Message-ID: <20260923093459.28125-17-y-abhilashchandra@ti.com> (raw)
In-Reply-To: <20260923093459.28125-1-y-abhilashchandra@ti.com>
DS90UB954-Q1EVM consists of a DS90UB954 deserializer which aggregates
data from up to 2x cameras over the FPDLink-III interface, and can be
used to connect FPDLink-III based sensors to TI EVMs.
Add an overlay to support it on J721E-EVM.
Link: https://www.ti.com/tool/DS90UB954-Q1EVM
Reviewed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
---
Changes in v3:
- Rename fixed-clock node to the generic clock-<frequency> form
(Krzysztof)
- Also rename fixed-clock label to lowercase
- Override CSI2RX port using &csi0_port0 label instead of the full
&cdns_csi2rx0 node path, and drop duplicated properties (Krzysztof)
- Update copyright year to 2026 (Udit)
arch/arm64/boot/dts/ti/Makefile | 4 +
.../arm64/boot/dts/ti/k3-j721e-evm-ub954.dtso | 83 +++++++++++++++++++
2 files changed, 87 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-evm-ub954.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index a66d11359bd4..9d3ab69267a6 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -177,6 +177,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi.dtb
dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-ub954.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-fpdlink-fusion.dtbo
@@ -425,6 +426,8 @@ k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
k3-j721e-evm-pcie0-ep.dtbo
k3-j721e-evm-pcie1-ep-dtbs := k3-j721e-common-proc-board.dtb \
k3-j721e-evm-pcie1-ep.dtbo
+k3-j721e-evm-ub954-dtbs := k3-j721e-common-proc-board.dtb \
+ k3-j721e-evm-ub954.dtbo
k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \
k3-j721e-sk-csi2-dual-imx219.dtbo
k3-j721e-sk-fpdlink-fusion-dtbs := k3-j721e-sk.dtb \
@@ -551,6 +554,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-j721e-evm-fpdlink-fusion.dtb \
k3-j721e-evm-pcie0-ep.dtb \
k3-j721e-evm-pcie1-ep.dtb \
+ k3-j721e-evm-ub954.dtb \
k3-j721e-sk-csi2-dual-imx219.dtb \
k3-j721e-sk-fpdlink-fusion.dtb \
k3-j721e-sk-v3link-fusion.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-ub954.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-ub954.dtso
new file mode 100644
index 000000000000..8db95c977071
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-ub954.dtso
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DT Overlay for DS90UB954-Q1EVM FPDLink-III deserializer board on J721E EVM
+ * https://www.ti.com/tool/DS90UB954-Q1EVM
+ *
+ * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ clk_fusion_25mhz: clock-25000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&main_i2c6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ deser@3d {
+ compatible = "ti,ds90ub954-q1";
+ reg = <0x3d>;
+ clock-names = "refclk";
+ clocks = <&clk_fusion_25mhz>;
+ i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
+
+ deserializer_0_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ /* CSI-2 TX */
+ port@2 {
+ reg = <2>;
+ ds90ub960_0_csi_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ clock-lanes = <0>;
+ link-frequencies = /bits/ 64 <800000000>;
+ remote-endpoint = <&csi2_phy0>;
+ };
+ };
+ };
+
+ deserializer_0_links: links {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&csi0_port0 {
+ status = "okay";
+
+ csi2_phy0: endpoint {
+ remote-endpoint = <&ds90ub960_0_csi_out>;
+ bus-type = <4>; /* CSI2 DPHY */
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <800000000>;
+ };
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
+
+&dphy0 {
+ status = "okay";
+};
--
2.34.1
next prev parent reply other threads:[~2026-09-23 9:38 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-23 9:34 [PATCH v3 00/18] Add DT support for CSI2RX multi-stream Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 01/18] arm64: dts: ti: k3-{j721e/j721s2}-main: Fix indentation in CSI2RX node Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 02/18] arm64: dts: ti: k3-j721e-main: Add multiple channels for CSI2RX DMA Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 03/18] arm64: dts: ti: k3-j721s2-main: " Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 04/18] arm64: dts: ti: k3-j784s4-j742s2-main-common: " Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 05/18] arm64: dts: ti: k3-am62p-j722s: " Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 06/18] arm64: dts: ti: k3-j722s-main: " Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 07/18] arm64: dts: ti: k3-j721e: Add overlay for fusion application daughter board Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 08/18] arm64: dts: ti: k3-j721s2: " Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 09/18] arm64: dts: ti: k3-j721e-sk: " Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 10/18] arm64: dts: ti: k3-j722s-evm: " Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 11/18] arm64: dts: ti: k3-am68-sk: Add overlay for dual Arducam V3link fusion Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 12/18] arm64: dts: ti: k3-j722s-evm: " Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 13/18] arm64: dts: ti: k3-j784s4-evm: Add overlay for J7EXPA01EVM Fusion2 Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 14/18] arm64: dts: ti: k3-j722s-evm: " Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 15/18] arm64: dts: ti: k3-j721s2: Add overlay for DS90UB954-Q1EVM Yemike Abhilash Chandra
2026-09-23 9:34 ` Yemike Abhilash Chandra [this message]
2026-09-23 9:34 ` [PATCH v3 17/18] arm64: dts: ti: k3-v3link: Add overlay for IMX219+UB953 serializer Yemike Abhilash Chandra
2026-09-23 9:34 ` [PATCH v3 18/18] arm64: defconfig: Enable DS90UB960 deserializer and DS90UB953 serializer Yemike Abhilash Chandra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260923093459.28125-17-y-abhilashchandra@ti.com \
--to=y-abhilashchandra@ti.com \
--cc=Frank.Li@nxp.com \
--cc=andersson@kernel.org \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=ebiggers@kernel.org \
--cc=festevam@gmail.com \
--cc=geert@linux-m68k.org \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca.weiss@fairphone.com \
--cc=michal.simek@amd.com \
--cc=nm@ti.com \
--cc=r-donadkar@ti.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sven@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox