[PATCH RESEND v7 0/2] Enable audio support for J721S2 EVM

[PATCH RESEND v7 0/2] Enable audio support for J721S2 EVM

[Moteen Shah]

Earlier version of the patchset sent upstream[0] was rejected as
its dependency[1], which resolves the DTBS check errors introduced
by [0] also got rejected on the grounds of ABI breakage.

Another solution to fix the DTBS check errors introduced by [0] is
to modify the ti,j721e-system-controller.yaml binding to allow
audio-refclk as clock-controller child. This is done in the first
patch of this series.

Changelog:
Resending the patch after rebasing on current linux-next

Logs: https://gist.github.com/Jamm02/a783fb6f7cb15e56e51b21dc9a87053b

Jayesh Choudhary (1):
  arm64: dts: ti: Add audio overlay for k3-j721s2-evm

Moteen Shah (1):
  dt-bindings: ti: Update audio-refclk binding and j721e system
    controller

 .../bindings/clock/ti,am62-audio-refclk.yaml  |   8 +-
 .../soc/ti/ti,j721e-system-controller.yaml    |   6 +-
 arch/arm64/boot/dts/ti/Makefile               |   4 +
 .../boot/dts/ti/k3-j721s2-evm-audio.dtso      | 157 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |   9 +
 5 files changed, 180 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso

-- 
2.34.1

[PATCH RESEND v7 1/2] dt-bindings: ti: Update audio-refclk binding and j721e system controller

[Moteen Shah]

Add ti,j721s2-audio-refclk as a supported compatible string in the
ti,am62-audio-refclk binding. J721S2 uses the same audio reference
clock IP block first introduced on AM62. Per writing-bindings
guidelines, the J721S2-specific compatible is added as the primary
string with ti,am62-audio-refclk as the fallback.

Also extend the ti,j721e-system-controller clock-controller@ child
pattern to accept audio-refclk schemas alongside ehrpwm-tbclk via a
oneOf constraint, fixing the alphanumerical ordering of $refs.

Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../devicetree/bindings/clock/ti,am62-audio-refclk.yaml   | 8 ++++++--
 .../bindings/soc/ti/ti,j721e-system-controller.yaml       | 6 ++++--
 2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
index b2e40bd39a3af..6c8fb0793070d 100644
--- a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
@@ -11,8 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - const: ti,am62-audio-refclk
+    oneOf:
+      - items:
+          - const: ti,am62-audio-refclk
+      - items:
+          - const: ti,j721s2-audio-refclk
+          - const: ti,am62-audio-refclk
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml
index f3bd0be3b279f..364be49f8c7c7 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml
@@ -53,9 +53,11 @@ patternProperties:
 
   "^clock-controller@[0-9a-f]+$":
     type: object
-    $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+    oneOf:
+      - $ref: /schemas/clock/ti,am62-audio-refclk.yaml#
+      - $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
     description:
-      Clock provider for TI EHRPWM nodes.
+      Clock provider for TI EHRPWM or Audio Reference Clock nodes.
 
   "phy@[0-9a-f]+$":
     type: object
-- 
2.34.1

[PATCH RESEND v7 2/2] arm64: dts: ti: Add audio overlay for k3-j721s2-evm

[Moteen Shah]

From: Jayesh Choudhary <j-choudhary@ti.com>

Add device tree overlay to enable analog audio support on J721S2-EVM
using PCM3168A codec connected to McASP4 serializers.

- Add audio_refclk1 clock node to k3-j721s2-main.dtsi
- Add nodes for sound-card, audio codec, I2C3 and McASP4
- Add pinmux for I2C3, McASP4, AUDIO_EXT_REFCLK1 and WKUP_GPIO_0
- Add GPIO expander (TCA6408) for codec control
- Add gpio-mux controller to route I2C3 lines
- Add GPIO hogs to route McASP serializers
- Set idle-state to 0 in mux0 and mux1 for McASP signal routing
- Disable main_mcan3 and main_mcan5 as they conflict with McASP4
  signal routing via mux0 and mux1

Co-developed-by: Moteen Shah <m-shah@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Reviewed-by: Sen Wang <sen@ti.com>
---
 arch/arm64/boot/dts/ti/Makefile               |   4 +
 .../boot/dts/ti/k3-j721s2-evm-audio.dtso      | 157 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |   9 +
 3 files changed, 170 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index fcfec8ea31658..bf52ae3e6a023 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -196,6 +196,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
 k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-audio.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-usb0-type-a.dtbo
 
@@ -408,6 +409,8 @@ k3-j721e-evm-pcie1-ep-dtbs := k3-j721e-common-proc-board.dtb \
 	k3-j721e-evm-pcie1-ep.dtbo
 k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
+k3-j721s2-evm-audio-dtbs := k3-j721s2-common-proc-board.dtb \
+	k3-j721s2-evm-audio.dtbo
 k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
 	k3-j721s2-evm-pcie1-ep.dtbo
 k3-j721s2-evm-usb0-type-a-dtbs := k3-j721s2-common-proc-board.dtb \
@@ -504,6 +507,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-j721e-evm-pcie0-ep.dtb \
 	k3-j721e-evm-pcie1-ep.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtb \
+	k3-j721s2-evm-audio.dtb \
 	k3-j721s2-evm-pcie1-ep.dtb \
 	k3-j721s2-evm-usb0-type-a.dtb \
 	k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso
new file mode 100644
index 0000000000000..ac5a827e1b750
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Overlay for J721S2 Audio Support
+ *
+ * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	codec_audio: sound {
+		compatible = "ti,j7200-cpb-audio";
+		model = "j721s2-cpb";
+
+		ti,cpb-mcasp = <&mcasp4>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 213 0>, <&k3_clks 213 1>,
+			 <&k3_clks 157 299>, <&k3_clks 157 328>;
+		clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000",
+			      "cpb-codec-scki", "cpb-codec-scki-48000";
+	};
+
+	i2c_mux: mux-controller-2 {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&wkup_gpio0 54 GPIO_ACTIVE_HIGH>;
+		idle-state = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_i2c3_mux_pins_default>;
+	};
+};
+
+&main_pmx0 {
+	mcasp4_pins_default: mcasp4-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c8, PIN_OUTPUT_PULLDOWN, 1) /* (AD28) MCASP4_ACLKX */
+			J721S2_IOPAD(0x06c, PIN_OUTPUT_PULLDOWN, 1) /* (V26) MCASP4_AFSX */
+			J721S2_IOPAD(0x068, PIN_INPUT_PULLDOWN, 1) /* (U28) MCASP4_AXR1 */
+			J721S2_IOPAD(0x0c4, PIN_OUTPUT_PULLDOWN, 1) /* (AB26) MCASP4_AXR2 */
+			J721S2_IOPAD(0x070, PIN_OUTPUT_PULLDOWN, 1) /* (R27) MCASP4_AXR3 */
+		>;
+	};
+
+	audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x078, PIN_OUTPUT, 1) /* (Y25) MCAN2_RX.AUDIO_EXT_REFCLK1 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	main_i2c3_mux_pins_default: main-i2c3-mux-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x038, PIN_OUTPUT, 7) /* (B27) WKUP_GPIO0_54 */
+		>;
+	};
+};
+
+&exp2 {
+	p09-hog {
+		/* P09 - MCASP/TRACE_MUX_S0 */
+		gpio-hog;
+		gpios = <9 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "MCASP/TRACE_MUX_S0";
+	};
+
+	p10-hog {
+		/* P10 - MCASP/TRACE_MUX_S1 */
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "MCASP/TRACE_MUX_S1";
+	};
+};
+
+&mux0 {
+	idle-state = <0>;
+};
+
+&mux1 {
+	idle-state = <0>;
+};
+
+&main_mcan3 {
+	/* Conflicts with McASP4 signal routing via mux0 */
+	status = "disabled";
+};
+
+&main_mcan5 {
+	/* Conflicts with McASP4 signal routing via mux1 */
+	status = "disabled";
+};
+
+&k3_clks {
+	/* Configure AUDIO_EXT_REFCLK1 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_ext_refclk1_pins_default>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+	mux-states = <&i2c_mux 1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CODEC_RSTZ", "CODEC_SPARE1",
+				  "UB926_RESETN", "UB926_LOCK",
+				  "UB926_PWR_SW_CNTRL", "UB926_TUNER_RESET",
+				  "UB926_GPIO_SPARE";
+	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+		#sound-dai-cells = <1>;
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+		clocks = <&audio_refclk1>;
+		clock-names = "scki";
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
+};
+
+&mcasp4 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp4_pins_default>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		0 2 1 1
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 1228ac5711bf0..36a01a06dd254 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -74,6 +74,15 @@ ehrpwm_tbclk: clock-controller@140 {
 			reg = <0x140 0x18>;
 			#clock-cells = <1>;
 		};
+
+		audio_refclk1: clock-controller@42e4 {
+			compatible = "ti,j721s2-audio-refclk", "ti,am62-audio-refclk";
+			reg = <0x42e4 0x4>;
+			clocks = <&k3_clks 157 299>;
+			assigned-clocks = <&k3_clks 157 299>;
+			assigned-clock-parents = <&k3_clks 157 328>;
+			#clock-cells = <0>;
+		};
 	};
 
 	main_ehrpwm0: pwm@3000000 {
-- 
2.34.1

Re: [PATCH RESEND v7 0/2] Enable audio support for J721S2 EVM

[Nishanth Menon]

Hi Moteen Shah,

On Wed, 23 Sep 2026 16:46:02 +0530, Moteen Shah wrote:
> Earlier version of the patchset sent upstream[0] was rejected as
> its dependency[1], which resolves the DTBS check errors introduced
> by [0] also got rejected on the grounds of ABI breakage.
> 
> Another solution to fix the DTBS check errors introduced by [0] is
> to modify the ti,j721e-system-controller.yaml binding to allow
> audio-refclk as clock-controller child. This is done in the first
> patch of this series.
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/2] dt-bindings: ti: Update audio-refclk binding and j721e system controller
      commit: c62fa7c2b8b186a4e319f9a51f981604c46ff627
[2/2] arm64: dts: ti: Add audio overlay for k3-j721s2-evm
      commit: e9591ff0ce7c83b68e4ddb285927415714030f4d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource