[PATCH v2 0/5] arm64: allwinner: a523: Enable CPU clocks

[PATCH v2 0/5] arm64: allwinner: a523: Enable CPU clocks

[Andre Przywara]

Hi,

after a year (again?) an update to the A523 CPU clock series. I heeded
Chen-Yu's advice and generalised the update bit to cover both the "key"
use case and the now no longer fixed update bit (patch 1). I also
followed one of Krzysztof's suggestions around the binding headers.
For a changelog see below. Based on v7.3-rc1.
This clashes slightly with the already queued clock fixes from Junhui,
please let me know how I should play this.

==============================
This series adds support for the CPU clock controller in the Allwinner
A523/A527/T527 family of SoCs.

In contrast to all earlier Allwinner SoCs, this chip features a separate
CCU for the CPU clocks (one for each of the two clusters) and the DSU
clock.

Patches 1 and 2 add some slight enhancements to the sunxi-ng clock driver
framework, to generalise the update bit and allow clocks with just a
power-of-2 divider.
Patch 3 adds the binding document for the new CCU.
Patch 4 adds the actual clock driver, and patch 5 makes use of that by
adding the clock description to the SoC .dtsi.

Please have a look and test!

Cheers,
Andre

Changes in v2:
- rebase on v7.3-rc1
- cover CCU_FEATURE_KEY_FIELD in update bits generalisation
- explicitly include binding header in clock driver
- order clocks property before enable-method in DT nodes


Andre Przywara (5):
  clk: sunxi-ng: generalise update bit
  clk: sunxi-ng: mp: support clocks with just a shift register
  dt-bindings: clock: sun55i-a523-ccu: Add A523 CPU CCU clock controller
  clk: sunxi-ng: add support for the A523/T527 CPU CCU
  arm64: dts: allwinner: a523: add CPU clocks

 .../clock/allwinner,sun55i-a523-ccu.yaml      |  25 ++
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi |  22 ++
 drivers/clk/sunxi-ng/Kconfig                  |   5 +
 drivers/clk/sunxi-ng/Makefile                 |   2 +
 drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.c    | 340 ++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.h    |  24 ++
 drivers/clk/sunxi-ng/ccu-sun55i-a523.c        |  12 +-
 drivers/clk/sunxi-ng/ccu-sun6i-rtc.c          |   4 +-
 drivers/clk/sunxi-ng/ccu_common.h             |   8 +-
 drivers/clk/sunxi-ng/ccu_div.c                |   3 +-
 drivers/clk/sunxi-ng/ccu_gate.c               |   6 +-
 drivers/clk/sunxi-ng/ccu_mp.c                 |   6 +-
 drivers/clk/sunxi-ng/ccu_mp.h                 |   8 +-
 drivers/clk/sunxi-ng/ccu_mux.c                |   8 +-
 drivers/clk/sunxi-ng/ccu_nm.c                 |   1 +
 .../dt-bindings/clock/sun55i-a523-cpu-ccu.h   |  13 +
 16 files changed, 456 insertions(+), 31 deletions(-)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.h
 create mode 100644 include/dt-bindings/clock/sun55i-a523-cpu-ccu.h


base-commit: cee9395acd8043be0644b25c34bfa86623f2b935
-- 
2.43.0

[PATCH v2 1/5] clk: sunxi-ng: generalise update bit

[Andre Przywara]

A few of the Allwinner A523 CCU clock registers introduced an "update" bit,
which must be set for changes to the other bits to take effect.
Of the three clocks where this was used, it was always bit 27, so we just
encoded this as a single bit feature flag.

Now the CPU PLL also features the update bit, but puts it at bit 26, so
this flag trick won't work anymore.

Add an "update_bit" field to the common sunxi clock struct, which takes a
bitmask, so we can encode any bit to use, even potentially multiple of
them. As uninitialised fields are set to 0, we can use this as a default
bitmask to set, so can OR this in unconditionally.
It turns out that the "update key" feature is doing something very
similar, so just convert it over to also use this same bitmask approach.

Change the existing update bit users to use this new encoding, and add
support for the ccu_nm clock on the way, since we will need it there
shortly.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/clk/sunxi-ng/ccu-sun55i-a523.c | 12 ++++++------
 drivers/clk/sunxi-ng/ccu-sun6i-rtc.c   |  4 ++--
 drivers/clk/sunxi-ng/ccu_common.h      |  8 +++-----
 drivers/clk/sunxi-ng/ccu_div.c         |  3 +--
 drivers/clk/sunxi-ng/ccu_gate.c        |  6 ++----
 drivers/clk/sunxi-ng/ccu_mp.h          |  8 +++++---
 drivers/clk/sunxi-ng/ccu_mux.c         |  8 +-------
 drivers/clk/sunxi-ng/ccu_nm.c          |  1 +
 8 files changed, 21 insertions(+), 29 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
index 20dad06b37ca3..35cddab0749b3 100644
--- a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
+++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
@@ -386,8 +386,8 @@ static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT(mbus_clk, "mbus", mbus_parents,
 					    0, 0,		/* no P */
 					    24, 3,	/* mux */
 					    BIT(31),	/* gate */
-					    CLK_IS_CRITICAL,
-					    CCU_FEATURE_UPDATE_BIT);
+					    BIT(27),	/* update*/
+					    CLK_IS_CRITICAL, 0);
 
 static const struct clk_hw *mbus_hws[] = { &mbus_clk.common.hw };
 
@@ -590,8 +590,8 @@ static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT(iommu_clk, "iommu", iommu_parents,
 					    0, 0,	/* no P */
 					    24, 3,	/* mux */
 					    BIT(31),	/* gate */
-					    CLK_SET_RATE_PARENT,
-					    CCU_FEATURE_UPDATE_BIT);
+					    BIT(27),	/* update */
+					    CLK_SET_RATE_PARENT, 0);
 
 static SUNXI_CCU_GATE_HWS(bus_iommu_clk, "bus-iommu", apb0_hws, 0x7bc,
 			  BIT(0), 0);
@@ -609,8 +609,8 @@ static SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT(dram_clk, "dram", dram_parents,
 					    0, 0,	/* no P */
 					    24, 3,	/* mux */
 					    BIT(31),	/* gate */
-					    CLK_IS_CRITICAL,
-					    CCU_FEATURE_UPDATE_BIT);
+					    BIT(27),	/* update*/
+					    CLK_IS_CRITICAL, 0);
 
 static SUNXI_CCU_GATE_HWS(mbus_dma_clk, "mbus-dma", mbus_hws,
 			  0x804, BIT(0), 0);
diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
index 98ae10307f438..dde56529f281d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
@@ -214,7 +214,7 @@ static struct ccu_mux osc32k_clk = {
 	.mux	= _SUNXI_CCU_MUX(0, 1),
 	.common	= {
 		.reg		= LOSC_CTRL_REG,
-		.features	= CCU_FEATURE_KEY_FIELD,
+		.update_bits	= CCU_MUX_KEY_VALUE,
 		.hw.init	= &osc32k_init_data,
 	},
 };
@@ -280,7 +280,7 @@ static struct ccu_mux rtc_32k_clk = {
 	.mux	= _SUNXI_CCU_MUX(1, 1),
 	.common	= {
 		.reg		= LOSC_CTRL_REG,
-		.features	= CCU_FEATURE_KEY_FIELD,
+		.update_bits	= CCU_MUX_KEY_VALUE,
 		.hw.init	= &rtc_32k_init_data,
 	},
 };
diff --git a/drivers/clk/sunxi-ng/ccu_common.h b/drivers/clk/sunxi-ng/ccu_common.h
index d9dc24ad55039..e0ed861735beb 100644
--- a/drivers/clk/sunxi-ng/ccu_common.h
+++ b/drivers/clk/sunxi-ng/ccu_common.h
@@ -17,17 +17,14 @@
 #define CCU_FEATURE_LOCK_REG		BIT(5)
 #define CCU_FEATURE_MMC_TIMING_SWITCH	BIT(6)
 #define CCU_FEATURE_SIGMA_DELTA_MOD	BIT(7)
-#define CCU_FEATURE_KEY_FIELD		BIT(8)
 #define CCU_FEATURE_CLOSEST_RATE	BIT(9)
 #define CCU_FEATURE_DUAL_DIV		BIT(10)
-#define CCU_FEATURE_UPDATE_BIT		BIT(11)
-#define CCU_FEATURE_IOSC_CALIBRATION	BIT(12)
+#define CCU_FEATURE_IOSC_CALIBRATION	BIT(11)
 
 /* MMC timing mode switch bit */
 #define CCU_MMC_NEW_TIMING_MODE		BIT(30)
 
-/* Some clocks need this bit to actually apply register changes */
-#define CCU_SUNXI_UPDATE_BIT		BIT(27)
+#define CCU_MUX_KEY_VALUE		0x16aa0000
 
 struct device_node;
 
@@ -36,6 +33,7 @@ struct ccu_common {
 	u16		reg;
 	u16		lock_reg;
 	u32		prediv;
+	u32		update_bits;
 
 	unsigned long	min_rate;
 	unsigned long	max_rate;
diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
index c385e0160f13b..a6e81bac18d6e 100644
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -119,8 +119,7 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	reg = readl(cd->common.base + cd->common.reg);
 	reg &= ~GENMASK(cd->div.width + cd->div.shift - 1, cd->div.shift);
-	if (cd->common.features & CCU_FEATURE_UPDATE_BIT)
-		reg |= CCU_SUNXI_UPDATE_BIT;
+	reg |= cd->common.update_bits;
 
 	writel(reg | (val << cd->div.shift),
 	       cd->common.base + cd->common.reg);
diff --git a/drivers/clk/sunxi-ng/ccu_gate.c b/drivers/clk/sunxi-ng/ccu_gate.c
index 30673fe4e3c2c..532e661b5f4b1 100644
--- a/drivers/clk/sunxi-ng/ccu_gate.c
+++ b/drivers/clk/sunxi-ng/ccu_gate.c
@@ -20,8 +20,7 @@ void ccu_gate_helper_disable(struct ccu_common *common, u32 gate)
 	spin_lock_irqsave(common->lock, flags);
 
 	reg = readl(common->base + common->reg);
-	if (common->features & CCU_FEATURE_UPDATE_BIT)
-		reg |= CCU_SUNXI_UPDATE_BIT;
+	reg |= common->update_bits;
 	writel(reg & ~gate, common->base + common->reg);
 
 	spin_unlock_irqrestore(common->lock, flags);
@@ -46,8 +45,7 @@ int ccu_gate_helper_enable(struct ccu_common *common, u32 gate)
 	spin_lock_irqsave(common->lock, flags);
 
 	reg = readl(common->base + common->reg);
-	if (common->features & CCU_FEATURE_UPDATE_BIT)
-		reg |= CCU_SUNXI_UPDATE_BIT;
+	reg |= common->update_bits;
 	writel(reg | gate, common->base + common->reg);
 
 	spin_unlock_irqrestore(common->lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_mp.h b/drivers/clk/sunxi-ng/ccu_mp.h
index bb09c649bfa35..6ebb48438b5d4 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.h
+++ b/drivers/clk/sunxi-ng/ccu_mp.h
@@ -131,7 +131,8 @@ struct ccu_mp {
 					     _mshift, _mwidth,		\
 					     _pshift, _pwidth,		\
 					     _muxshift, _muxwidth,	\
-					     _gate, _flags, _features)	\
+					     _gate, _key_update,	\
+					     _flags, _features)		\
 	struct ccu_mp _struct = {					\
 		.enable	= _gate,					\
 		.m	= _SUNXI_CCU_DIV(_mshift, _mwidth),		\
@@ -140,6 +141,7 @@ struct ccu_mp {
 		.common	= {						\
 			.reg		= _reg,				\
 			.features	= _features,			\
+			.update_bits	= _key_update,			\
 			.hw.init	= CLK_HW_INIT_PARENTS_DATA(_name, \
 								   _parents, \
 								   &ccu_mp_ops, \
@@ -156,7 +158,7 @@ struct ccu_mp {
 					     _reg, _mshift, _mwidth,	\
 					     _pshift, _pwidth,		\
 					     _muxshift, _muxwidth,	\
-					     _gate, _flags, 0)
+					     _gate, 0, _flags, 0)
 
 #define SUNXI_CCU_DUALDIV_MUX_GATE(_struct, _name, _parents, _reg,	\
 				   _mshift, _mwidth,			\
@@ -167,7 +169,7 @@ struct ccu_mp {
 					     _reg, _mshift, _mwidth,	\
 					     _pshift, _pwidth,		\
 					     _muxshift, _muxwidth,	\
-					     _gate, _flags,		\
+					     _gate, 0, _flags,		\
 					     CCU_FEATURE_DUAL_DIV)
 
 #define SUNXI_CCU_MP_DATA_WITH_MUX(_struct, _name, _parents, _reg,	\
diff --git a/drivers/clk/sunxi-ng/ccu_mux.c b/drivers/clk/sunxi-ng/ccu_mux.c
index 4503c9780c39f..3bb2ba5e809a3 100644
--- a/drivers/clk/sunxi-ng/ccu_mux.c
+++ b/drivers/clk/sunxi-ng/ccu_mux.c
@@ -12,8 +12,6 @@
 #include "ccu_gate.h"
 #include "ccu_mux.h"
 
-#define CCU_MUX_KEY_VALUE		0x16aa0000
-
 static u16 ccu_mux_get_prediv(struct ccu_common *common,
 			      struct ccu_mux_internal *cm,
 			      int parent_index)
@@ -203,11 +201,7 @@ int ccu_mux_helper_set_parent(struct ccu_common *common,
 
 	reg = readl(common->base + common->reg);
 
-	/* The key field always reads as zero. */
-	if (common->features & CCU_FEATURE_KEY_FIELD)
-		reg |= CCU_MUX_KEY_VALUE;
-	if (common->features & CCU_FEATURE_UPDATE_BIT)
-		reg |= CCU_SUNXI_UPDATE_BIT;
+	reg |= common->update_bits;
 
 	reg &= ~GENMASK(cm->width + cm->shift - 1, cm->shift);
 	writel(reg | (index << cm->shift), common->base + common->reg);
diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index df01ed3b37a6b..80aad0650f348 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -219,6 +219,7 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	reg |= (_nm.n - nm->n.offset) << nm->n.shift;
 	reg |= (_nm.m - nm->m.offset) << nm->m.shift;
+	reg |= nm->common.update_bits;
 	writel(reg, nm->common.base + nm->common.reg);
 
 	spin_unlock_irqrestore(nm->common.lock, flags);
-- 
2.43.0

Re: [PATCH v2 1/5] clk: sunxi-ng: generalise update bit

[Chen-Yu Tsai]

On Fri, Sep 18, 2026 at 6:39 AM Andre Przywara <andre.przywara@arm.com> wrote:
>
> A few of the Allwinner A523 CCU clock registers introduced an "update" bit,
> which must be set for changes to the other bits to take effect.
> Of the three clocks where this was used, it was always bit 27, so we just
> encoded this as a single bit feature flag.
>
> Now the CPU PLL also features the update bit, but puts it at bit 26, so
> this flag trick won't work anymore.
>
> Add an "update_bit" field to the common sunxi clock struct, which takes a
> bitmask, so we can encode any bit to use, even potentially multiple of
> them. As uninitialised fields are set to 0, we can use this as a default
> bitmask to set, so can OR this in unconditionally.
> It turns out that the "update key" feature is doing something very
> similar, so just convert it over to also use this same bitmask approach.
>
> Change the existing update bit users to use this new encoding, and add
> support for the ccu_nm clock on the way, since we will need it there
> shortly.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Reviewed-by: Chen-Yu Tsai <wens@kernel.org>

[PATCH v2 2/5] clk: sunxi-ng: mp: support clocks with just a shift register

[Andre Przywara]

The "mp" clock models a mod clock with divider and a shift field. At
least one clock in the Allwinner A523 features just a power-of-2 divider
field, so support an initialisation of the clock without providing an
actual divider field.

Add a check whether the "width" field is 0, and skip the divider
handling in this case, as the GENMASK macro will not work with a zero
length.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/clk/sunxi-ng/ccu_mp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
index 7cdb0eedc69b5..3896cb94bf733 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.c
+++ b/drivers/clk/sunxi-ng/ccu_mp.c
@@ -236,9 +236,11 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
 	spin_lock_irqsave(cmp->common.lock, flags);
 
 	reg = readl(cmp->common.base + cmp->common.reg);
-	reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
+	if (cmp->m.width)
+		reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
 	reg &= ~GENMASK(cmp->p.width + cmp->p.shift - 1, cmp->p.shift);
-	reg |= (m - cmp->m.offset) << cmp->m.shift;
+	if (cmp->m.width)
+		reg |= (m - cmp->m.offset) << cmp->m.shift;
 	if (shift)
 		reg |= ilog2(p) << cmp->p.shift;
 	else
-- 
2.43.0

Re: [PATCH v2 2/5] clk: sunxi-ng: mp: support clocks with just a shift register

[Chen-Yu Tsai]

On Fri, Sep 18, 2026 at 6:39 AM Andre Przywara <andre.przywara@arm.com> wrote:
>
> The "mp" clock models a mod clock with divider and a shift field. At
> least one clock in the Allwinner A523 features just a power-of-2 divider
> field, so support an initialisation of the clock without providing an
> actual divider field.

Please just use the single divider clock type instead. It properly supports
power-of-2 dividers.

ChenYu

> Add a check whether the "width" field is 0, and skip the divider
> handling in this case, as the GENMASK macro will not work with a zero
> length.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  drivers/clk/sunxi-ng/ccu_mp.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
> index 7cdb0eedc69b5..3896cb94bf733 100644
> --- a/drivers/clk/sunxi-ng/ccu_mp.c
> +++ b/drivers/clk/sunxi-ng/ccu_mp.c
> @@ -236,9 +236,11 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
>         spin_lock_irqsave(cmp->common.lock, flags);
>
>         reg = readl(cmp->common.base + cmp->common.reg);
> -       reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
> +       if (cmp->m.width)
> +               reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
>         reg &= ~GENMASK(cmp->p.width + cmp->p.shift - 1, cmp->p.shift);
> -       reg |= (m - cmp->m.offset) << cmp->m.shift;
> +       if (cmp->m.width)
> +               reg |= (m - cmp->m.offset) << cmp->m.shift;
>         if (shift)
>                 reg |= ilog2(p) << cmp->p.shift;
>         else
> --
> 2.43.0
>

Re: [PATCH v2 2/5] clk: sunxi-ng: mp: support clocks with just a shift register

[Andre Przywara]

On Fri, 18 Sep 2026 11:51:19 +0800
Chen-Yu Tsai <wens@kernel.org> wrote:

Hi,

> On Fri, Sep 18, 2026 at 6:39 AM Andre Przywara <andre.przywara@arm.com> wrote:
> >
> > The "mp" clock models a mod clock with divider and a shift field. At
> > least one clock in the Allwinner A523 features just a power-of-2 divider
> > field, so support an initialisation of the clock without providing an
> > actual divider field.
> 
> Please just use the single divider clock type instead. It properly supports
> power-of-2 dividers.

Ah, indeed, there is SUNXI_CCU_P_DATA_WITH_MUX_GATE now, will drop this
patch then.

So when using that macro it looks like this:
static SUNXI_CCU_P_DATA_WITH_MUX_GATE(pll_cpu_l_div_clk, "pll-cpu-l-div",
                                      pll_cpu_l_hws, 0x060,
                                      16, 2,                    /* P */
                                      0, 0,                     /* no mux */
                                      0,                        /* no gate */
                                      CLK_SET_RATE_PARENT);     /* flags */

There are still some unused bits, does that look OK or shall I add a
macro that allows to skip mux and gate?
static SUNXI_CCU_P_DATA(pll_cpu_l_div_clk, "pll-cpu-l-div",
			pll_cpu_l_hws, 0x60,
			16, 2,			/* P */
			CLK_SET_RATE_PARENT);	/* flags */

Cheers,
Andre


> 
> ChenYu
> 
> > Add a check whether the "width" field is 0, and skip the divider
> > handling in this case, as the GENMASK macro will not work with a zero
> > length.
> >
> > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > ---
> >  drivers/clk/sunxi-ng/ccu_mp.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
> > index 7cdb0eedc69b5..3896cb94bf733 100644
> > --- a/drivers/clk/sunxi-ng/ccu_mp.c
> > +++ b/drivers/clk/sunxi-ng/ccu_mp.c
> > @@ -236,9 +236,11 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
> >         spin_lock_irqsave(cmp->common.lock, flags);
> >
> >         reg = readl(cmp->common.base + cmp->common.reg);
> > -       reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
> > +       if (cmp->m.width)
> > +               reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
> >         reg &= ~GENMASK(cmp->p.width + cmp->p.shift - 1, cmp->p.shift);
> > -       reg |= (m - cmp->m.offset) << cmp->m.shift;
> > +       if (cmp->m.width)
> > +               reg |= (m - cmp->m.offset) << cmp->m.shift;
> >         if (shift)
> >                 reg |= ilog2(p) << cmp->p.shift;
> >         else
> > --
> > 2.43.0
> >
> 

[PATCH v2 3/5] dt-bindings: clock: sun55i-a523-ccu: Add A523 CPU CCU clock controller

[Andre Przywara]

There are four clock controllers in the A523 SoC, but only three are
described in the DT binding so far.

Add a description for the CPU CCU, which provides separate clocks for
the two CPU clusters and the DSU interconnect.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 .../clock/allwinner,sun55i-a523-ccu.yaml      | 25 +++++++++++++++++++
 .../dt-bindings/clock/sun55i-a523-cpu-ccu.h   | 13 ++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 include/dt-bindings/clock/sun55i-a523-cpu-ccu.h

diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
index 58be701a720ea..98d47d2aabc48 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     enum:
       - allwinner,sun55i-a523-ccu
+      - allwinner,sun55i-a523-cpu-ccu
       - allwinner,sun55i-a523-mcu-ccu
       - allwinner,sun55i-a523-r-ccu
 
@@ -64,6 +65,30 @@ allOf:
             - const: iosc
             - const: losc-fanout
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun55i-a523-cpu-ccu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: High Frequency Oscillator (usually at 24MHz)
+            - description: Low Frequency Oscillator (usually at 32kHz)
+            - description: Internal Oscillator
+            - description: Peripherals PLL 0 (1200 MHz output)
+            - description: Peripherals PLL 0 (600 MHz output)
+
+        clock-names:
+          items:
+            - const: hosc
+            - const: losc
+            - const: iosc
+            - const: pll-periph0-2x
+            - const: pll-periph0-600m
+
   - if:
       properties:
         compatible:
diff --git a/include/dt-bindings/clock/sun55i-a523-cpu-ccu.h b/include/dt-bindings/clock/sun55i-a523-cpu-ccu.h
new file mode 100644
index 0000000000000..042f2310f64de
--- /dev/null
+++ b/include/dt-bindings/clock/sun55i-a523-cpu-ccu.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright 2025 Arm Ltd.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN55I_A523_CPU_CCU_H_
+#define _DT_BINDINGS_CLK_SUN55I_A523_CPU_CCU_H_
+
+#define CLK_CPU_L		7
+#define CLK_CPU_DSU		8
+#define CLK_CPU_B		9
+
+#endif /* _DT_BINDINGS_CLK_SUN55I_A523_CPU_CCU_H_ */
-- 
2.43.0

[PATCH v2 4/5] clk: sunxi-ng: add support for the A523/T527 CPU CCU

[Andre Przywara]

The A523 contains a separate CCU block for the CPU PLLs. This includes
one CPU clock per cluster, plus the DSU PLL, which clocks the part that
connects the two clusters. There is also a "backup" PLL, which can be used
to clock the cores when the main PLLs are reprogrammed.
Those PLLs are then connected via MUXes to the two clusters and the DSU.

Describe those clocks and their relationship, to allow the kernel to
adjust the core frequency.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/clk/sunxi-ng/Kconfig               |   5 +
 drivers/clk/sunxi-ng/Makefile              |   2 +
 drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.c | 340 +++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.h |  24 ++
 4 files changed, 371 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 6af2d020e03e9..c34af60139124 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -67,6 +67,11 @@ config SUN55I_A523_R_CCU
 	default ARCH_SUNXI
 	depends on ARM64 || COMPILE_TEST
 
+config SUN55I_A523_CPU_CCU
+	tristate "Support for the Allwinner A523/T527 CPU CCU"
+	default y
+	depends on ARM64 || COMPILE_TEST
+
 config SUN4I_A10_CCU
 	tristate "Support for the Allwinner A10/A20 CCU"
 	default ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index a1c4087d72417..309ff5a089ecf 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_SUN50I_H616_CCU)	+= sun50i-h616-ccu.o
 obj-$(CONFIG_SUN55I_A523_CCU)	+= sun55i-a523-ccu.o
 obj-$(CONFIG_SUN55I_A523_MCU_CCU)	+= sun55i-a523-mcu-ccu.o
 obj-$(CONFIG_SUN55I_A523_R_CCU)	+= sun55i-a523-r-ccu.o
+obj-$(CONFIG_SUN55I_A523_CPU_CCU)	+= sun55i-a523-cpu-ccu.o
 obj-$(CONFIG_SUN4I_A10_CCU)	+= sun4i-a10-ccu.o
 obj-$(CONFIG_SUN5I_CCU)		+= sun5i-ccu.o
 obj-$(CONFIG_SUN6I_A31_CCU)	+= sun6i-a31-ccu.o
@@ -64,6 +65,7 @@ sun50i-h616-ccu-y		+= ccu-sun50i-h616.o
 sun55i-a523-ccu-y		+= ccu-sun55i-a523.o
 sun55i-a523-mcu-ccu-y		+= ccu-sun55i-a523-mcu.o
 sun55i-a523-r-ccu-y		+= ccu-sun55i-a523-r.o
+sun55i-a523-cpu-ccu-y		+= ccu-sun55i-a523-cpu.o
 sun4i-a10-ccu-y			+= ccu-sun4i-a10.o
 sun5i-ccu-y			+= ccu-sun5i.o
 sun6i-a31-ccu-y			+= ccu-sun6i-a31.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.c
new file mode 100644
index 0000000000000..e505aefc92370
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Arm Ltd.
+ *
+ * There are four PLLs: one for the little cluster (cores 0-3: PLL1), one for
+ * the "big" cluster (cores 4-7: PLL3), one for the DSU interconnect (probably
+ * its SCLK, driving the L3 cache: PLL2), and one undocumented "backup" PLL0,
+ * which can be used to drive either or both clusters, while the original PLLs
+ * are re-programmed (and re-lock).
+ * PLL[123] are the same, with a multiplier, a predivider, and two separate
+ * divider fields. For PLL1 and PLL3 there is an additional shift field, in
+ * the mux clock - although that applies only to the PLL, not the other sources.
+ * The two clusters and the DSU are connected to a mux clock each, selecting
+ * from various sources, including the PLL-PERIPH0-600M clock, again useful
+ * during DVFS operations:
+ *
+ *                           PLL-PERI0-600M (from the main CCU)
+ *                               |
+ *                       +-------+-----------+
+ *                      /         \           \
+ *            +------+ /  +------+ \  +------+ \  +------+
+ *            | PLL1 | |  | PLL0 | |  | PLL3 | |  | PLL2 |
+ *            +------+ |  +------+ |  +------+ |  +------+
+ *                \    |     ^     |    /      |     /
+ *                DIV  |    / \    |  DIV      |    /       (plus 24MHz,
+ *                  \  |   /   \   |  /        |   |              32KHz,
+ *                +---------+ +---------+   +---------+           16MHz,
+ *                 \ CPU-L /   \ CPU-B /     \  DSU  /       for each mux)
+ *                  \     /     \     /       \     /
+ *                   +---+       +---+         +---+
+ *                     |           |             |
+ *             +-------+-----------+-----DSU-----+----+
+ *             |   +---+---+   +---+---+              |
+ *             |   | cores |   | cores |              |
+ *             |   |  0-3  |   |  4-7  | +------------+
+ *             |   +-------+   +-------+ |  L3 cache  |
+ *             +-------------------------+------------+
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_nm.h"
+#include "ccu_mult.h"
+
+#include <dt-bindings/clock/sun55i-a523-cpu-ccu.h>
+#include "ccu-sun55i-a523-cpu.h"
+
+/*
+ * The 24 MHz oscillator, the root of most of the clock tree.
+ * .fw_name is the string used in the DT "clock-names" property, used to
+ * identify the corresponding clock in the "clocks" property.
+ */
+static const struct clk_parent_data osc24M[] = {
+	{ .fw_name = "hosc" }
+};
+
+/*
+ * Undocumented PLL, mux-able to both clusters, usable as an interim PLL
+ * during DVFS clock rate changes. Bits [23:16] and [4:2] are RAZ/WI, which
+ * looks like the DDR or VIDEO PLLs, and not like the other CPU PLLs.
+ * Bits [1:0] are not dividers, as they don't have any effect on the frequency.
+ */
+#define SUN55I_A523_PLL_CPU_0_REG		0x00
+
+static struct ccu_mult pll_cpu_0_clk = {
+	.enable	= BIT(27),
+	.lock	= BIT(28),
+	.mult	= _SUNXI_CCU_MULT(8, 8),
+	.common	= {
+		.reg		= 0x00,
+		.hw.init	= CLK_HW_INIT_PARENTS_DATA("pll-cpu-0", osc24M,
+							   &ccu_mult_ops,
+							   CLK_SET_RATE_UNGATE),
+	},
+};
+static const struct clk_parent_data pll_cpu_0_hws[] = {
+	{ .hw = &pll_cpu_0_clk.common.hw },
+};
+
+/*
+ * The PLLs are input * N / P / (M0 * M1). Model them as NM, by ignoring the
+ * predivider P and the only 2-bit wide M0, and fixing them to 1 in probe().
+ * Using NKMP wouldn't be better, because the "P" in there is a shift.
+ * The actual enable bit is bit 31, which we set once in probe, along with
+ * some other control bits, as the manual recommends to not touch them
+ * during runtime.
+ */
+#define SUN55I_A523_PLL_CPU_L_REG		0x04
+static struct ccu_nm pll_cpu_l_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 20, 108),
+	.m		= _SUNXI_CCU_DIV(0, 3),		/* M1 */
+	.common		= {
+		.reg		= 0x04,
+		.update_bits	= BIT(26),
+		.hw.init	= CLK_HW_INIT_PARENTS_DATA("pll-cpu-l", osc24M,
+							   &ccu_nm_ops,
+							   CLK_SET_RATE_UNGATE |
+							   CLK_IS_CRITICAL),
+	},
+};
+static const struct clk_parent_data pll_cpu_l_hws[] = {
+	{ .hw = &pll_cpu_l_clk.common.hw },
+};
+
+#define SUN55I_A523_PLL_CPU_DSU_REG		0x08
+static struct ccu_nm pll_cpu_dsu_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 20, 108),
+	.m		= _SUNXI_CCU_DIV(0, 3),		/* M1 */
+	.common		= {
+		.reg		= 0x08,
+		.update_bits	= BIT(26),
+		.hw.init	= CLK_HW_INIT_PARENTS_DATA("pll-cpu-dsu", osc24M,
+							   &ccu_nm_ops,
+							   CLK_SET_RATE_UNGATE |
+							   CLK_IS_CRITICAL),
+	},
+};
+static const struct clk_parent_data pll_cpu_dsu_hws[] = {
+	{ .hw = &pll_cpu_dsu_clk.common.hw },
+};
+
+#define SUN55I_A523_PLL_CPU_B_REG		0x0c
+static struct ccu_nm pll_cpu_b_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 20, 108),
+	.m		= _SUNXI_CCU_DIV(0, 3),		/* M1 */
+	.common		= {
+		.reg		= 0x0c,
+		.update_bits	= BIT(26),
+		.hw.init	= CLK_HW_INIT_PARENTS_DATA("pll-cpu-b", osc24M,
+							   &ccu_nm_ops,
+							   CLK_SET_RATE_UNGATE |
+							   CLK_IS_CRITICAL),
+	},
+};
+static const struct clk_parent_data pll_cpu_b_hws[] = {
+	{ .hw = &pll_cpu_b_clk.common.hw },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX(pll_cpu_l_div_clk, "pll-cpu-l-div",
+				  pll_cpu_l_hws, 0x060,
+				  0, 0,		/* no M */
+				  16, 2,	/* P */
+				  0, 0,		/* no mux */
+				  CLK_SET_RATE_PARENT);		/* flags */
+static SUNXI_CCU_MP_DATA_WITH_MUX(pll_cpu_b_div_clk, "pll-cpu-b-div",
+				  pll_cpu_b_hws, 0x064,
+				  0, 0,		/* no M */
+				  16, 2,	/* P */
+				  0, 0,		/* no mux */
+				  CLK_SET_RATE_PARENT);		/* flags */
+static SUNXI_CCU_MP_DATA_WITH_MUX(pll_cpu_dsu_div_clk, "pll-cpu-dsu-div",
+				  pll_cpu_dsu_hws, 0x06c,
+				  0, 0,		/* no M */
+				  16, 2,	/* P */
+				  0, 0,		/* no mux */
+				  CLK_SET_RATE_PARENT);		/* flags */
+
+static const struct clk_parent_data cpu_l_parents[] = {
+	{ .fw_name = "hosc" },
+	{ .fw_name = "losc" },
+	{ .fw_name = "iosc" },
+	{ .hw = &pll_cpu_l_div_clk.common.hw },
+	{ .fw_name = "pll-periph0-600M" },
+	{ .hw = &pll_cpu_0_clk.common.hw },
+};
+
+static SUNXI_CCU_MUX_DATA(cpu_l_clk, "cpu-l", cpu_l_parents, 0x60,
+			  24, 3,		/* mux */
+			  CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+static const struct clk_parent_data cpu_b_parents[] = {
+	{ .fw_name = "hosc" },
+	{ .fw_name = "losc" },
+	{ .fw_name = "iosc" },
+	{ .hw = &pll_cpu_b_div_clk.common.hw },
+	{ .fw_name = "pll-periph0-600M" },
+	{ .hw = &pll_cpu_0_clk.common.hw },
+};
+
+static SUNXI_CCU_MUX_DATA(cpu_b_clk, "cpu-b", cpu_b_parents, 0x64,
+			  24, 3,		/* mux */
+			  CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+/*
+ * Register 0x68 holds gate bits for the two cluster clocks and the DSU.
+ * We leave them alone in the kernel, that's something for TF-A or the SCP.
+ */
+
+static const struct clk_parent_data cpu_dsu_parents[] = {
+	{ .fw_name = "hosc" },
+	{ .fw_name = "losc" },
+	{ .fw_name = "iosc" },
+	{ .hw = &pll_cpu_dsu_div_clk.common.hw },
+	{ .fw_name = "pll-periph0-2x" },
+	{ .fw_name = "pll-periph0-600M" },
+};
+
+static SUNXI_CCU_MUX_DATA(cpu_dsu_clk, "cpu-dsu", cpu_dsu_parents, 0x6c,
+			  24, 3,		/* mux */
+			  CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+static struct ccu_common *sun55i_a523_cpu_ccu_clks[] = {
+	&pll_cpu_0_clk.common,
+	&pll_cpu_l_clk.common,
+	&pll_cpu_b_clk.common,
+	&pll_cpu_dsu_clk.common,
+	&pll_cpu_l_div_clk.common,
+	&pll_cpu_b_div_clk.common,
+	&pll_cpu_dsu_div_clk.common,
+	&cpu_l_clk.common,
+	&cpu_b_clk.common,
+	&cpu_dsu_clk.common,
+};
+
+static struct clk_hw_onecell_data sun55i_a523_cpu_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPU_0]		= &pll_cpu_0_clk.common.hw,
+		[CLK_PLL_CPU_L]		= &pll_cpu_l_clk.common.hw,
+		[CLK_PLL_CPU_DSU]	= &pll_cpu_dsu_clk.common.hw,
+		[CLK_PLL_CPU_B]		= &pll_cpu_b_clk.common.hw,
+		[CLK_DIV_CPU_L]		= &pll_cpu_l_div_clk.common.hw,
+		[CLK_DIV_CPU_DSU]	= &pll_cpu_dsu_div_clk.common.hw,
+		[CLK_DIV_CPU_B]		= &pll_cpu_b_div_clk.common.hw,
+		[CLK_CPU_L]		= &cpu_l_clk.common.hw,
+		[CLK_CPU_DSU]		= &cpu_dsu_clk.common.hw,
+		[CLK_CPU_B]		= &cpu_b_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static const struct sunxi_ccu_desc sun55i_a523_cpu_ccu_desc = {
+	.ccu_clks	= sun55i_a523_cpu_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun55i_a523_cpu_ccu_clks),
+
+	.hw_clks	= &sun55i_a523_cpu_hw_clks,
+};
+
+static const u32 pll_regs[] = {
+	SUN55I_A523_PLL_CPU_0_REG,
+	SUN55I_A523_PLL_CPU_L_REG,
+	SUN55I_A523_PLL_CPU_DSU_REG,
+	SUN55I_A523_PLL_CPU_B_REG,
+};
+
+static struct ccu_mux_nb sun55i_a523_cpu_l_nb = {
+	.common		= &cpu_l_clk.common,
+	.cm		= &cpu_l_clk.mux,
+	.delay_us	= 1, /* manual doesn't really say */
+	.bypass_index	= 4, /* PLL_PERI0@600MHz, as recommended by manual */
+};
+static struct ccu_mux_nb sun55i_a523_cpu_b_nb = {
+	.common		= &cpu_b_clk.common,
+	.cm		= &cpu_b_clk.mux,
+	.delay_us	= 1, /* manual doesn't really say */
+	.bypass_index	= 4, /* PLL_PERI0@600MHz, as recommended by manual */
+};
+
+static int sun55i_a523_cpu_ccu_probe(struct platform_device *pdev)
+{
+	const struct sunxi_ccu_desc *desc;
+	void __iomem *reg;
+	int i, ret;
+	u32 val;
+
+	desc = of_device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	/*
+	 * The user manual recommends to keep the PLLs running, and just
+	 * gate their output if they are not needed, to avoid interference
+	 * with other PLLs, since they share a power domain.
+	 * To comply with this, we use this output gate as the CCF enable bit,
+	 * so we need to enable all PLLs here. Chances are the bootloader has
+	 * already enabled at least one PLL, so check if it's already running
+	 * and locked, before touching it.
+	 * We set the enable, the LDO and the lock bits, and clear dividers.
+	 */
+	for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
+		val = readl(reg + pll_regs[i]);
+		if ((val & GENMASK(31, 28)) != GENMASK(31, 28)) {
+			val |= BIT(31) | BIT(30) | BIT(29) | BIT(26);
+			val &= ~GENMASK(21, 16); /* covering PLL_P and PLL_M0 */
+			writel(val, reg + pll_regs[i]);
+		}
+	}
+
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, desc);
+	if (ret)
+		return ret;
+
+	/* Reparent CPU during CPU PLL rate changes */
+	ccu_mux_notifier_register(pll_cpu_l_clk.common.hw.clk,
+				  &sun55i_a523_cpu_l_nb);
+	ccu_mux_notifier_register(pll_cpu_b_clk.common.hw.clk,
+				  &sun55i_a523_cpu_b_nb);
+
+	return ret;
+}
+
+static const struct of_device_id sun55i_a523_cpu_ccu_ids[] = {
+	{
+		.compatible = "allwinner,sun55i-a523-cpu-ccu",
+		.data = &sun55i_a523_cpu_ccu_desc,
+	},
+	{ }
+};
+
+static struct platform_driver sun55i_a523_cpu_ccu_driver = {
+	.probe	= sun55i_a523_cpu_ccu_probe,
+	.driver	= {
+		.name			= "sun55i-a523-cpu-ccu",
+		.suppress_bind_attrs	= true,
+		.of_match_table		= sun55i_a523_cpu_ccu_ids,
+	},
+};
+module_platform_driver(sun55i_a523_cpu_ccu_driver);
+
+MODULE_IMPORT_NS("SUNXI_CCU");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.h b/drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.h
new file mode 100644
index 0000000000000..484343b2c4fa6
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523-cpu.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2025 Arm Ltd.
+ */
+
+#ifndef _CCU_SUN55I_A523_CPU_H
+#define _CCU_SUN55I_A523_CPU_H
+
+#include <dt-bindings/clock/sun55i-a523-cpu-ccu.h>
+
+/* The PLL clocks itself and the pure divider clocks are not exported. */
+
+#define CLK_PLL_CPU_0		0
+#define CLK_PLL_CPU_L		1
+#define CLK_PLL_CPU_DSU		2
+#define CLK_PLL_CPU_B		3
+
+#define CLK_DIV_CPU_L		4
+#define CLK_DIV_CPU_DSU		5
+#define CLK_DIV_CPU_B		6
+
+#define CLK_NUMBER	(CLK_CPU_B + 1)
+
+#endif /* _CCU_SUN55I_A523_CPU_H */
-- 
2.43.0

[PATCH v2 5/5] arm64: dts: allwinner: a523: add CPU clocks

[Andre Przywara]

The Allwinner A523 family of SoCs feature a separate clock unit for the
CPU PLLs and muxes, including one for the DSU interconnect.

Add a DT node for the CPU clock controller, and list all the clocks from
the other CCUs that this controller needs.
Also list the clock source for each CPU: there is one clock for each
cluster of four cores, suffixed L and B, for little and big (although
all cores are of the same Cortex-A55 type).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 85ef492ffeae7..29af21372aba2 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/sun55i-a523-ccu.h>
 #include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
 #include <dt-bindings/clock/sun55i-a523-r-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-cpu-ccu.h>
 #include <dt-bindings/reset/sun55i-a523-ccu.h>
 #include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
 #include <dt-bindings/reset/sun55i-a523-r-ccu.h>
@@ -25,6 +26,7 @@ cpu0: cpu@0 {
 			compatible = "arm,cortex-a55";
 			device_type = "cpu";
 			reg = <0x000>;
+			clocks = <&cpu_ccu CLK_CPU_L>;
 			enable-method = "psci";
 		};
 
@@ -32,6 +34,7 @@ cpu1: cpu@100 {
 			compatible = "arm,cortex-a55";
 			device_type = "cpu";
 			reg = <0x100>;
+			clocks = <&cpu_ccu CLK_CPU_L>;
 			enable-method = "psci";
 		};
 
@@ -39,6 +42,7 @@ cpu2: cpu@200 {
 			compatible = "arm,cortex-a55";
 			device_type = "cpu";
 			reg = <0x200>;
+			clocks = <&cpu_ccu CLK_CPU_L>;
 			enable-method = "psci";
 		};
 
@@ -46,6 +50,7 @@ cpu3: cpu@300 {
 			compatible = "arm,cortex-a55";
 			device_type = "cpu";
 			reg = <0x300>;
+			clocks = <&cpu_ccu CLK_CPU_L>;
 			enable-method = "psci";
 		};
 
@@ -53,6 +58,7 @@ cpu4: cpu@400 {
 			compatible = "arm,cortex-a55";
 			device_type = "cpu";
 			reg = <0x400>;
+			clocks = <&cpu_ccu CLK_CPU_B>;
 			enable-method = "psci";
 		};
 
@@ -60,6 +66,7 @@ cpu5: cpu@500 {
 			compatible = "arm,cortex-a55";
 			device_type = "cpu";
 			reg = <0x500>;
+			clocks = <&cpu_ccu CLK_CPU_B>;
 			enable-method = "psci";
 		};
 
@@ -67,6 +74,7 @@ cpu6: cpu@600 {
 			compatible = "arm,cortex-a55";
 			device_type = "cpu";
 			reg = <0x600>;
+			clocks = <&cpu_ccu CLK_CPU_B>;
 			enable-method = "psci";
 		};
 
@@ -74,6 +82,7 @@ cpu7: cpu@700 {
 			compatible = "arm,cortex-a55";
 			device_type = "cpu";
 			reg = <0x700>;
+			clocks = <&cpu_ccu CLK_CPU_B>;
 			enable-method = "psci";
 		};
 	};
@@ -1144,5 +1153,18 @@ npu: npu@7122000 {
 			resets = <&mcu_ccu RST_BUS_MCU_NPU>;
 			power-domains = <&ppu PD_NPU>;
 		};
+
+		cpu_ccu: clock-controller@8817000 {
+			compatible = "allwinner,sun55i-a523-cpu-ccu";
+			reg = <0x08817000 0x80>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>, <&ccu CLK_PLL_PERIPH0_2X>,
+				 <&ccu CLK_PLL_PERIPH0_600M>;
+			clock-names = "hosc", "losc",
+				      "iosc", "pll-periph0-2x",
+				      "pll-periph0-600M";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
 	};
 };
-- 
2.43.0