From: James Morse <james.morse@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Ben Horgan <ben.horgan@arm.com>,
Andre Przywara <andre.przywara@arm.com>,
Fuad Tabba <fuad.tabba@linux.dev>, Gavin Shan <gshan@redhat.com>,
James Morse <james.morse@arm.com>
Subject: [PATCH 10/27] arm_mpam: Don't loop forever if there is the maximum possible amount of PARTIDs
Date: Fri, 2 Oct 2026 18:39:23 +0100 [thread overview]
Message-ID: <20261002173941.292319-11-james.morse@arm.com> (raw)
In-Reply-To: <20261002173941.292319-1-james.morse@arm.com>
From: Ben Horgan <ben.horgan@arm.com>
On a theoretical platform with the maximum possible number of usable
PARTIDs, 0XFFFF, the loops iterating over PARTID in mpam_reset_ris() and
mpam_reprogram_ris() will never reach their termination condition leading
to a system hang when register the cpu hotplug handlers when MPAM is
enabling.
Fix these loops.
Fixes: f188a36ca241 ("arm_mpam: Reset MSC controls from cpuhp callbacks")
Fixes: 09b89d2a72f3 ("arm_mpam: Allow configuration to be applied and restored during cpu online")
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
drivers/resctrl/mpam_devices.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index 2369f814de48..67545df984fa 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -1760,7 +1760,7 @@ static int mpam_save_mbwu_state(void *arg)
*/
static int mpam_reset_ris(void *arg)
{
- u16 partid, partid_max;
+ u16 partid_max;
struct mpam_config reset_cfg = {};
struct mpam_msc_ris *ris = arg;
@@ -1770,7 +1770,7 @@ static int mpam_reset_ris(void *arg)
spin_lock(&partid_max_lock);
partid_max = mpam_partid_max;
spin_unlock(&partid_max_lock);
- for (partid = 0; partid <= partid_max; partid++)
+ for (u32 partid = 0; partid <= partid_max; partid++)
mpam_reprogram_ris_partid(ris, partid, &reset_cfg);
return 0;
@@ -1817,7 +1817,6 @@ static int __write_config(void *arg)
static void mpam_reprogram_msc(struct mpam_msc *msc)
{
- u16 partid;
bool reset;
struct mpam_config *cfg;
struct mpam_msc_ris *ris;
@@ -1841,7 +1840,7 @@ static void mpam_reprogram_msc(struct mpam_msc *msc)
arg.comp = ris->vmsc->comp;
arg.ris = ris;
reset = true;
- for (partid = 0; partid <= mpam_partid_max; partid++) {
+ for (u32 partid = 0; partid <= mpam_partid_max; partid++) {
cfg = &ris->vmsc->comp->cfg[partid];
if (!bitmap_empty(cfg->features, MPAM_FEATURE_LAST))
reset = false;
--
2.53.0
next prev parent reply other threads:[~2026-10-02 17:40 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-02 17:39 [GIT PULL/PATCH 00/27] MPAM driver changes for v7.4 James Morse
2026-10-02 17:39 ` [PATCH 01/27] arm_mpam: Move MPAMF_ECR write helpers to allow reuse James Morse
2026-10-02 17:39 ` [PATCH 02/27] arm_mpam: Restore the error interrupt enable from mpam_cpu_online() James Morse
2026-10-02 17:39 ` [PATCH 03/27] arm_mpam: Set mpam_feat_msmon_mbwu_31counter when there are bandwidth counters James Morse
2026-10-02 17:39 ` [PATCH 04/27] arm_mpam: Add missing mon_sel locking in MBWU save and restore James Morse
2026-10-02 17:39 ` [PATCH 05/27] arm_mpam: Ensure MBWU counters are reset on restore James Morse
2026-10-02 17:39 ` [PATCH 06/27] arm_mpam: Use __ris_msmon_read() for saving MBWU state James Morse
2026-10-02 18:52 ` Ben Horgan
2026-10-02 18:54 ` Catalin Marinas
2026-10-02 17:39 ` [PATCH 07/27] arm_mpam: Initialize all of struct mon_read in mpam_restore_mbwu_state() James Morse
2026-10-02 17:39 ` [PATCH 08/27] arm_mpam: resctrl: Correct check that existing class is L3 James Morse
2026-10-02 17:39 ` [PATCH 09/27] arm_mpam: resctrl: Make read_mon_cdp_safe() self consistent James Morse
2026-10-02 17:39 ` James Morse [this message]
2026-10-02 17:39 ` [PATCH 11/27] arm_mpam: Switch to kvzmalloc_objs() for allocation of component cfg James Morse
2026-10-02 17:39 ` [PATCH 12/27] arm_mpam: resctrl: Don't stop early when tearing down a class James Morse
2026-10-02 17:39 ` [PATCH 13/27] MAINTAINERS: Add mpam.rst to the MPAM DRIVER entry James Morse
2026-10-02 17:39 ` [PATCH 15/27] arm_mpam: let low level MSC accessors return an error James Morse
2026-10-02 17:39 ` [PATCH 16/27] arm_mpam: propagate MSC access errors for hw_probe functions James Morse
2026-10-02 17:39 ` [PATCH 17/27] arm_mpam: propagate MSC access errors for MBWU counters James Morse
2026-10-02 17:39 ` [PATCH 18/27] arm_mpam: propagate MSC access errors for msmon helpers James Morse
2026-10-02 17:39 ` [PATCH 19/27] arm_mpam: propagate MSC access errors for __ris_msmon_read() James Morse
2026-10-02 17:39 ` [PATCH 20/27] arm_mpam: propagate MSC access errors for state saving function James Morse
2026-10-02 17:39 ` [PATCH 21/27] arm_mpam: propagate MSC access errors for mpam_reprogram_ris_partid() James Morse
2026-10-02 17:39 ` [PATCH 22/27] arm_mpam: propagate MSC access errors for interrupt control James Morse
2026-10-02 17:39 ` [PATCH 23/27] arm_mpam: propagate MSC access errors in mpam_reset_class_locked() James Morse
2026-10-02 17:39 ` [PATCH 24/27] arm_mpam: prepare mon_sel locking for MPAM-Fb James Morse
2026-10-02 17:39 ` [PATCH 25/27] arm_mpam: add MPAM-Fb MSC firmware access support James Morse
2026-10-02 17:39 ` [PATCH 26/27] arm_mpam: change MPAM-Fb error IRQ to use a threaded IRQ handler James Morse
2026-10-02 17:39 ` [PATCH 27/27] arm_mpam: detect and enable MPAM-Fb PCC support James Morse
2026-10-02 19:02 ` [GIT PULL/PATCH 00/27] MPAM driver changes for v7.4 Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261002173941.292319-11-james.morse@arm.com \
--to=james.morse@arm.com \
--cc=andre.przywara@arm.com \
--cc=ben.horgan@arm.com \
--cc=catalin.marinas@arm.com \
--cc=fuad.tabba@linux.dev \
--cc=gshan@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox