Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: James Morse <james.morse@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>, Ben Horgan <ben.horgan@arm.com>,
	Andre Przywara <andre.przywara@arm.com>,
	Fuad Tabba <fuad.tabba@linux.dev>, Gavin Shan <gshan@redhat.com>,
	James Morse <james.morse@arm.com>
Subject: [PATCH 04/27] arm_mpam: Add missing mon_sel locking in MBWU save and restore
Date: Fri,  2 Oct 2026 18:39:17 +0100	[thread overview]
Message-ID: <20261002173941.292319-5-james.morse@arm.com> (raw)
In-Reply-To: <20261002173941.292319-1-james.morse@arm.com>

From: Ben Horgan <ben.horgan@arm.com>

The mon_sel_lock is used to protect the mbwu_state, as well as h/w accesses
that use MPAMCFG_MON_SEL. However, in mpam_restore/save_mbwu_state(),
mbwu_state is accessed without holding the mon_sel_lock.

Add the missing locking.

Fixes: 41e8a14950e1 ("arm_mpam: Track bandwidth counter state for power management")
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
 drivers/resctrl/mpam_devices.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index e349db525882..d39d210574a6 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -1652,17 +1652,26 @@ static int mpam_restore_mbwu_state(void *_ris)
 	u64 val;
 	struct mon_read mwbu_arg;
 	struct mpam_msc_ris *ris = _ris;
+	struct mpam_msc *msc = ris->vmsc->msc;
 	struct mpam_class *class = ris->vmsc->comp->class;
 
 	for (i = 0; i < ris->props.num_mbwu_mon; i++) {
-		if (ris->mbwu_state[i].enabled) {
-			mwbu_arg.ris = ris;
-			mwbu_arg.ctx = &ris->mbwu_state[i].cfg;
-			mwbu_arg.type = mpam_msmon_choose_counter(class);
-			mwbu_arg.val = &val;
+		if (WARN_ON_ONCE(!mpam_mon_sel_lock(msc)))
+			return -EIO;
 
-			__ris_msmon_read(&mwbu_arg);
+		if (!ris->mbwu_state[i].enabled) {
+			mpam_mon_sel_unlock(msc);
+			continue;
 		}
+
+		mwbu_arg.ris = ris;
+		mwbu_arg.ctx = &ris->mbwu_state[i].cfg;
+		mwbu_arg.type = mpam_msmon_choose_counter(class);
+		mwbu_arg.val = &val;
+
+		mpam_mon_sel_unlock(msc);
+
+		__ris_msmon_read(&mwbu_arg);
 	}
 
 	return 0;
@@ -1680,12 +1689,12 @@ static int mpam_save_mbwu_state(void *arg)
 	struct mpam_msc *msc = ris->vmsc->msc;
 
 	for (i = 0; i < ris->props.num_mbwu_mon; i++) {
+		if (WARN_ON_ONCE(!mpam_mon_sel_lock(msc)))
+			return -EIO;
+
 		mbwu_state = &ris->mbwu_state[i];
 		cfg = &mbwu_state->cfg;
 
-		if (WARN_ON_ONCE(!mpam_mon_sel_lock(msc)))
-			return -EIO;
-
 		mon_sel = FIELD_PREP(MSMON_CFG_MON_SEL_MON_SEL, i) |
 			  FIELD_PREP(MSMON_CFG_MON_SEL_RIS, ris->ris_idx);
 		mpam_write_monsel_reg(msc, CFG_MON_SEL, mon_sel);
-- 
2.53.0



  parent reply	other threads:[~2026-10-02 17:40 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-02 17:39 [GIT PULL/PATCH 00/27] MPAM driver changes for v7.4 James Morse
2026-10-02 17:39 ` [PATCH 01/27] arm_mpam: Move MPAMF_ECR write helpers to allow reuse James Morse
2026-10-02 17:39 ` [PATCH 02/27] arm_mpam: Restore the error interrupt enable from mpam_cpu_online() James Morse
2026-10-02 17:39 ` [PATCH 03/27] arm_mpam: Set mpam_feat_msmon_mbwu_31counter when there are bandwidth counters James Morse
2026-10-02 17:39 ` James Morse [this message]
2026-10-02 17:39 ` [PATCH 05/27] arm_mpam: Ensure MBWU counters are reset on restore James Morse
2026-10-02 17:39 ` [PATCH 06/27] arm_mpam: Use __ris_msmon_read() for saving MBWU state James Morse
2026-10-02 18:52   ` Ben Horgan
2026-10-02 18:54     ` Catalin Marinas
2026-10-02 17:39 ` [PATCH 07/27] arm_mpam: Initialize all of struct mon_read in mpam_restore_mbwu_state() James Morse
2026-10-02 17:39 ` [PATCH 08/27] arm_mpam: resctrl: Correct check that existing class is L3 James Morse
2026-10-02 17:39 ` [PATCH 09/27] arm_mpam: resctrl: Make read_mon_cdp_safe() self consistent James Morse
2026-10-02 17:39 ` [PATCH 10/27] arm_mpam: Don't loop forever if there is the maximum possible amount of PARTIDs James Morse
2026-10-02 17:39 ` [PATCH 11/27] arm_mpam: Switch to kvzmalloc_objs() for allocation of component cfg James Morse
2026-10-02 17:39 ` [PATCH 12/27] arm_mpam: resctrl: Don't stop early when tearing down a class James Morse
2026-10-02 17:39 ` [PATCH 13/27] MAINTAINERS: Add mpam.rst to the MPAM DRIVER entry James Morse
2026-10-02 17:39 ` [PATCH 15/27] arm_mpam: let low level MSC accessors return an error James Morse
2026-10-02 17:39 ` [PATCH 16/27] arm_mpam: propagate MSC access errors for hw_probe functions James Morse
2026-10-02 17:39 ` [PATCH 17/27] arm_mpam: propagate MSC access errors for MBWU counters James Morse
2026-10-02 17:39 ` [PATCH 18/27] arm_mpam: propagate MSC access errors for msmon helpers James Morse
2026-10-02 17:39 ` [PATCH 19/27] arm_mpam: propagate MSC access errors for __ris_msmon_read() James Morse
2026-10-02 17:39 ` [PATCH 20/27] arm_mpam: propagate MSC access errors for state saving function James Morse
2026-10-02 17:39 ` [PATCH 21/27] arm_mpam: propagate MSC access errors for mpam_reprogram_ris_partid() James Morse
2026-10-02 17:39 ` [PATCH 22/27] arm_mpam: propagate MSC access errors for interrupt control James Morse
2026-10-02 17:39 ` [PATCH 23/27] arm_mpam: propagate MSC access errors in mpam_reset_class_locked() James Morse
2026-10-02 17:39 ` [PATCH 24/27] arm_mpam: prepare mon_sel locking for MPAM-Fb James Morse
2026-10-02 17:39 ` [PATCH 25/27] arm_mpam: add MPAM-Fb MSC firmware access support James Morse
2026-10-02 17:39 ` [PATCH 26/27] arm_mpam: change MPAM-Fb error IRQ to use a threaded IRQ handler James Morse
2026-10-02 17:39 ` [PATCH 27/27] arm_mpam: detect and enable MPAM-Fb PCC support James Morse
2026-10-02 19:02 ` [GIT PULL/PATCH 00/27] MPAM driver changes for v7.4 Catalin Marinas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261002173941.292319-5-james.morse@arm.com \
    --to=james.morse@arm.com \
    --cc=andre.przywara@arm.com \
    --cc=ben.horgan@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=fuad.tabba@linux.dev \
    --cc=gshan@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox