From: Navid Ghahremani <ghahramani.navid@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: arnd@arndb.de, stefandoesinger@gmail.com, krzk@kernel.org,
Navid Ghahremani <ghahramani.navid@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 02/24] dt-bindings: arm: Add ZTE ZX279128S platform descriptions
Date: Wed, 14 Oct 2026 08:20:42 +0100 [thread overview]
Message-ID: <20261014072109.1759502-3-ghahramani.navid@gmail.com> (raw)
In-Reply-To: <20261014072109.1759502-1-ghahramani.navid@gmail.com>
Describe the SoC board compatibility, SRAM used by the parked second CPU
and the SMP enable method.
Signed-off-by: Navid Ghahremani <ghahramani.navid@gmail.com>
---
Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
Documentation/devicetree/bindings/arm/zte.yaml | 8 +++++++-
Documentation/devicetree/bindings/sram/sram.yaml | 1 +
3 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 5be89c5840..25a141f80b 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -284,6 +284,7 @@ properties:
- ste,dbx500-smp
- ti,am3352
- ti,am4372
+ - zte,zx279128s-smp
cpu-release-addr:
oneOf:
diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml
index f028d2cec7..a1a3742219 100644
--- a/Documentation/devicetree/bindings/arm/zte.yaml
+++ b/Documentation/devicetree/bindings/arm/zte.yaml
@@ -11,7 +11,8 @@ maintainers:
description: |
ARM platforms using SoCs designed by ZTE. Currently this supports devices
- based on the zx297520v3 SoC which is found in LTE routers.
+ based on the zx297520v3 SoC which is found in LTE routers, and on the
+ zx279128s SoC which is found in home gateways.
properties:
$nodename:
@@ -23,4 +24,9 @@ properties:
- dlink,dwr932m
- const: zte,zx297520v3
+ - items:
+ - enum:
+ - zte,zxhn-h3600
+ - const: zte,zx279128s
+
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
index b83fc68319..d1389156c1 100644
--- a/Documentation/devicetree/bindings/sram/sram.yaml
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -104,6 +104,7 @@ patternProperties:
- samsung,exynos4210-sysram-ns
- socionext,milbeaut-smp-sram
- stericsson,u8500-esram
+ - zte,zx279128s-smp-sram
reg:
description:
--
2.55.0
next prev parent reply other threads:[~2026-10-14 7:23 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-14 7:20 [PATCH v2 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 01/24] MAINTAINERS: Consolidate ARM/ZTE ZX SOC SUPPORT with Stefan Doesinger Navid Ghahremani
2026-10-14 20:11 ` Stefan Dösinger
2026-10-14 7:20 ` Navid Ghahremani [this message]
2026-10-14 7:20 ` [PATCH v2 03/24] ARM: zte: Add ZX279128S platform and CPU hotplug support Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 04/24] dt-bindings: clock: Add ZTE ZX279128S CRM clock bindings Navid Ghahremani
2026-10-14 21:48 ` Stefan Dösinger
2026-10-15 9:25 ` Krzysztof Kozlowski
2026-10-15 9:26 ` Krzysztof Kozlowski
2026-10-14 7:20 ` [PATCH v2 05/24] dt-bindings: reset: Add ZTE ZX279128S reset controller bindings Navid Ghahremani
2026-10-15 9:27 ` Krzysztof Kozlowski
2026-10-14 7:20 ` [PATCH v2 06/24] clk: zte: Add ZX279128S CRM clock and reset driver Navid Ghahremani
2026-10-14 13:21 ` Philipp Zabel
2026-10-14 19:39 ` Stefan Dösinger
2026-10-14 7:20 ` [PATCH v2 07/24] dt-bindings: gpio: Add ZTE ZX279128S GPIO controller Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 08/24] gpio: Add ZTE ZX279128S GPIO driver Navid Ghahremani
2026-10-14 21:11 ` Stefan Dösinger
2026-10-15 12:25 ` Bartosz Golaszewski
2026-10-14 7:20 ` [PATCH v2 09/24] dt-bindings: pinctrl: pinctrl-single: Add ZTE ZX279128S pin mux Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 10/24] dt-bindings: phy: Add ZTE ZX279128S PCIe PHY binding Navid Ghahremani
2026-10-15 9:29 ` Krzysztof Kozlowski
2026-10-14 7:20 ` [PATCH v2 11/24] phy: zte: Add ZTE ZX279128S PCIe PHY driver Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 12/24] dt-bindings: PCI: Add ZTE ZX279128S host controller Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 13/24] PCI: dwc: Add ZTE ZX279128S host controller driver Navid Ghahremani
2026-10-14 13:19 ` Bjorn Helgaas
2026-10-14 21:06 ` Stefan Dösinger
2026-10-14 7:20 ` [PATCH v2 14/24] dt-bindings: net: Add ZTE ZX279128S MDIO controller Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 15/24] net: mdio: " Navid Ghahremani
2026-10-14 12:13 ` Andrew Lunn
2026-10-14 7:20 ` [PATCH v2 16/24] net: phy: Add Sanechips ZX5201 PHY support Navid Ghahremani
2026-10-14 12:37 ` Andrew Lunn
2026-10-14 7:20 ` [PATCH v2 17/24] dt-bindings: net: Add ZTE ZX279128S Ethernet switch Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 18/24] net: ethernet: zte: Add ZX279128S Ethernet switch driver Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 19/24] dt-bindings: spi: Add ZTE ZX family SPI flash controller binding Navid Ghahremani
2026-10-14 20:33 ` Stefan Dösinger
2026-10-15 9:35 ` Krzysztof Kozlowski
2026-10-15 9:36 ` Krzysztof Kozlowski
2026-10-14 7:21 ` [PATCH v2 20/24] spi: zx: Add ZTE ZX family SPI flash controller driver Navid Ghahremani
2026-10-14 19:28 ` Stefan Dösinger
2026-10-15 9:34 ` Krzysztof Kozlowski
2026-10-14 7:21 ` [PATCH v2 21/24] dt-bindings: usb: Add ZTE ZX279128S DWC3 controller Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 22/24] usb: dwc3: generic-plat: Add ZTE ZX279128S Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 23/24] ARM: dts: zte: Add ZX279128S SoC description Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 24/24] ARM: dts: zte: Add ZTE ZXHN H3600 board Navid Ghahremani
2026-10-14 12:52 ` Andrew Lunn
2026-10-14 20:00 ` [PATCH v2 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Stefan Dösinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261014072109.1759502-3-ghahramani.navid@gmail.com \
--to=ghahramani.navid@gmail.com \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=robh@kernel.org \
--cc=stefandoesinger@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox