Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Leo Yan <leo.yan@arm.com>
To: Suzuki K Poulose <suzuki.poulose@arm.com>,
	 Mike Leach <mike.leach@arm.com>,
	James Clark <james.clark@linaro.org>,
	 Alexander Shishkin <alexander.shishkin@linux.intel.com>,
	 Anshuman Khandual <anshuman.khandual@arm.com>,
	 Tamas Petz <tamas.petz@arm.com>,
	Tamas Zsoldos <tamas.zsoldos@arm.com>,
	 Suyash Mahar <smahar@meta.com>, Amir Ayupov <aaupov@fb.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,  coresight@lists.linaro.org,
	Leo Yan <leo.yan@arm.com>
Subject: [PATCH v2 02/11] coresight: trbe: Refactor next buffer computation
Date: Fri, 16 Oct 2026 22:11:40 +0100	[thread overview]
Message-ID: <20261016-trbe_buffer_refactor_v2-v2-2-383ac26382fa@arm.com> (raw)
In-Reply-To: <20261016-trbe_buffer_refactor_v2-v2-0-383ac26382fa@arm.com>

compute_trbe_buffer_limit() only returned the next TRBE limit pointer,
leaving __arm_trbe_enable() to derive the remaining buffer state and
detect the -ENOSPC case.

Replace it with trbe_compute_next(), which computes the next TRBE buffer
state as one operation. Let the snapshot and normal paths set
buf->trbe_limit directly and return 0 or an errno, then update
trbe_write and trbe_hw_base after a successful limit calculation. The
normal path now reports -ENOSPC directly when no writable area is
available.

This refactoring is for future extensions, such as calculating
additional values (e.g., the trigger count). No functional changes are
intended.

Signed-off-by: Leo Yan <leo.yan@arm.com>
---
 drivers/hwtracing/coresight/coresight-trbe.c | 44 +++++++++++++++++-----------
 1 file changed, 27 insertions(+), 17 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-trbe.c b/drivers/hwtracing/coresight/coresight-trbe.c
index ada4794c51f3eb9142cd62f4209affe308142d1b..09ed9bcf4a70479169094697dcc3d445629cfaae 100644
--- a/drivers/hwtracing/coresight/coresight-trbe.c
+++ b/drivers/hwtracing/coresight/coresight-trbe.c
@@ -349,7 +349,7 @@ static void trbe_pad_buf(struct perf_output_handle *handle, int len)
 		perf_aux_output_skip(handle, len);
 }
 
-static unsigned long trbe_snapshot_offset(struct perf_output_handle *handle)
+static int trbe_snapshot_offset(struct perf_output_handle *handle)
 {
 	struct trbe_buf *buf = etm_perf_sink_config(handle);
 
@@ -358,7 +358,8 @@ static unsigned long trbe_snapshot_offset(struct perf_output_handle *handle)
 	 * the decoder to reset in case of an overflow or corruption.
 	 * So we can use the entire buffer for the snapshot mode.
 	 */
-	return buf->nr_pages * PAGE_SIZE;
+	buf->trbe_limit = buf->trbe_base + buf->nr_pages * PAGE_SIZE;
+	return 0;
 }
 
 static u64 trbe_min_trace_buf_size(struct perf_output_handle *handle)
@@ -527,7 +528,7 @@ static unsigned long __trbe_normal_offset(struct perf_output_handle *handle)
 	return 0;
 }
 
-static unsigned long trbe_normal_offset(struct perf_output_handle *handle)
+static int trbe_normal_offset(struct perf_output_handle *handle)
 {
 	struct trbe_buf *buf = etm_perf_sink_config(handle);
 	u64 limit = __trbe_normal_offset(handle);
@@ -546,19 +547,34 @@ static unsigned long trbe_normal_offset(struct perf_output_handle *handle)
 		limit = __trbe_normal_offset(handle);
 		head = PERF_IDX2OFF(handle->head, buf);
 	}
-	return limit;
+
+	if (!limit)
+		return -ENOSPC;
+
+	buf->trbe_limit = buf->trbe_base + limit;
+	return 0;
 }
 
-static unsigned long compute_trbe_buffer_limit(struct perf_output_handle *handle)
+static int trbe_compute_next(struct perf_output_handle *handle)
 {
 	struct trbe_buf *buf = etm_perf_sink_config(handle);
-	unsigned long offset;
+	int ret;
+
+	perf_aux_output_flag(handle, PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW);
 
 	if (buf->snapshot)
-		offset = trbe_snapshot_offset(handle);
+		ret = trbe_snapshot_offset(handle);
 	else
-		offset = trbe_normal_offset(handle);
-	return buf->trbe_base + offset;
+		ret = trbe_normal_offset(handle);
+
+	if (ret)
+		return ret;
+
+	buf->trbe_write = buf->trbe_base + PERF_IDX2OFF(handle->head, buf);
+
+	/* Set the base of the TRBE to the buffer base */
+	buf->trbe_hw_base = buf->trbe_base;
+	return 0;
 }
 
 static void clr_trbe_status(void)
@@ -1022,15 +1038,9 @@ static int __arm_trbe_enable(struct trbe_buf *buf,
 {
 	int ret = 0;
 
-	perf_aux_output_flag(handle, PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW);
-	buf->trbe_limit = compute_trbe_buffer_limit(handle);
-	buf->trbe_write = buf->trbe_base + PERF_IDX2OFF(handle->head, buf);
-	if (buf->trbe_limit == buf->trbe_base) {
-		ret = -ENOSPC;
+	ret = trbe_compute_next(handle);
+	if (ret)
 		goto err;
-	}
-	/* Set the base of the TRBE to the buffer base */
-	buf->trbe_hw_base = buf->trbe_base;
 
 	ret = trbe_apply_work_around_before_enable(buf);
 	if (ret)

-- 
2.34.1



  parent reply	other threads:[~2026-10-16 21:12 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-16 21:11 [PATCH v2 00/11] coresight: trbe: Refactor buffer handling and add trigger support Leo Yan
2026-10-16 21:11 ` [PATCH v2 01/11] coresight: trbe: Remove misleading comment Leo Yan
2026-10-16 21:11 ` Leo Yan [this message]
2026-10-16 21:11 ` [PATCH v2 03/11] coresight: trbe: Track trigger count support per CPU Leo Yan
2026-10-16 21:11 ` [PATCH v2 04/11] coresight: trbe: Use trigger mode for buffer maintenance Leo Yan
2026-10-16 21:11 ` [PATCH v2 05/11] coresight: trbe: Leave headroom for stop-on-trigger mode Leo Yan
2026-10-16 21:11 ` [PATCH v2 06/11] coresight: trbe: Save and restore trigger counter Leo Yan
2026-10-16 21:11 ` [PATCH v2 07/11] coresight: trbe: Add KUnit tests for compute normal buffer Leo Yan
2026-10-16 21:11 ` [PATCH v2 08/11] perf cs-etm: Reset decoder on COLLISION flag Leo Yan
2026-10-16 21:11 ` [PATCH v2 09/11] perf cs-etm: Reset per-thread decoder on CPU migration Leo Yan
2026-10-16 21:11 ` [PATCH v2 10/11] perf cs-etm: Reset decoder on AUX offset discontinuity Leo Yan
2026-10-16 21:11 ` [PATCH v2 11/11] perf cs-etm: Set watermark for AUX trace Leo Yan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261016-trbe_buffer_refactor_v2-v2-2-383ac26382fa@arm.com \
    --to=leo.yan@arm.com \
    --cc=aaupov@fb.com \
    --cc=alexander.shishkin@linux.intel.com \
    --cc=anshuman.khandual@arm.com \
    --cc=coresight@lists.linaro.org \
    --cc=james.clark@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mike.leach@arm.com \
    --cc=smahar@meta.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tamas.petz@arm.com \
    --cc=tamas.zsoldos@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox