From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Jonas Karlman <jonas@kwiboo.se>, Heiko Stuebner <heiko@sntech.de>,
Sasha Levin <sashal@kernel.org>,
hjc@rock-chips.com, andyshrk@163.com,
maarten.lankhorst@linux.intel.com, mripard@kernel.org,
tzimmermann@suse.de, airlied@gmail.com, simona@ffwll.ch,
dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH AUTOSEL 6.18-5.10] drm/rockchip: dw_hdmi: Use resume_early pm ops for system suspend
Date: Mon, 19 Oct 2026 09:50:40 -0400 [thread overview]
Message-ID: <20261019135441.1420968-349-sashal@kernel.org> (raw)
In-Reply-To: <20261019135441.1420968-1-sashal@kernel.org>
From: Jonas Karlman <jonas@kwiboo.se>
[ Upstream commit af3a9eadc11896f6677bcb7102bfb7c84be48d2d ]
rockchip_drm_sys_resume()/drm_mode_config_helper_resume() is called
before the resume pm ops of dw-hdmi. This result in an atomic_enable()
before dw_hdmi_rockchip_resume()/dw_hdmi_resume() is called.
Resume (without changes):
- rockchip_drm_sys_resume()
- drm_mode_config_helper_resume()
- atomic_enable()
- dw_hdmi_rockchip_resume()
- dw_hdmi_resume()
- dw_hdmi_init_hw()
Change to use resume_early pm ops for system suspend to ensure pm ops
for dw-hdmi is run before rockchip-drm pm ops. Also fix a possible NULL
pointer dereference timing issue while at it.
Resume (with changes):
- dw_hdmi_rockchip_resume_early()
- dw_hdmi_resume()
- dw_hdmi_init_hw()
- rockchip_drm_sys_resume()
- drm_mode_config_helper_resume()
- atomic_enable()
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-12-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
LLM Generated explanations, may be completely bogus:
I have the 6.18.y picture: the buggy resume path is in v6.18.53, the
patch is self-contained, and the DSI sibling already uses the same
late/early PM ordering. Compiling the full nine-phase verdict next.
===============================================================
PHASE 1: COMMIT MESSAGE FORENSICS
===============================================================
Step 1.1: PARSE THE SUBJECT LINE
Record: [drm/rockchip: dw_hdmi] [Use] [switch HDMI system-resume
callback to resume_early so dw-hdmi re-inits before rockchip-drm
atomic_enable]
Step 1.2: PARSE ALL COMMIT MESSAGE TAGS
Record:
- Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328 (Rockchip DRM
maintainer; hardware-tested)
- Signed-off-by: Jonas Karlman <jonas@kwiboo.se> (author)
- Signed-off-by: Heiko Stuebner <heiko@sntech.de> (subsystem maintainer
applied it)
- Link:
https://patch.msgid.link/20260518193748.2482823-12-jonas@kwiboo.se
- No Fixes:, Reported-by, Reviewed-by, Acked-by, or Cc: stable (absence
expected)
- Ignore pipeline tags: [Upstream commit
af3a9eadc11896f6677bcb7102bfb7c84be48d2d], Signed-off-by: Sasha Levin
Notable: maintainer Tested-by on real RK3328 hardware.
Step 1.3: ANALYZE THE COMMIT BODY TEXT
Record:
- Bug: on system resume, `rockchip_drm_sys_resume()` →
`drm_mode_config_helper_resume()` → atomic enable runs before
`dw_hdmi_resume()` → `dw_hdmi_init_hw()`.
- Symptom: HDMI hardware (DDC I2C, HPD, interrupt mutes) is restored
after DRM has already tried to re-enable the display pipeline.
- Secondary: “possible NULL pointer dereference timing issue” — resume
can run with NULL drvdata.
- No stack trace, syzbot report, or CVE. Author gave simulated-suspend
(`pm_test`) and `rtcwake` test steps in the mailing-list version.
Step 1.4: DETECT HIDDEN BUG FIXES
Record: Not disguised. It is an explicit PM-ordering fix plus a NULL
check. It was patch 11/11 of a series titled “Misc cleanup and propagate
bus format”, and was added in v2; the other patches are unrelated
cleanups/prep. This hunk is a standalone bug fix.
===============================================================
PHASE 2: DIFF ANALYSIS - LINE BY LINE
===============================================================
Step 2.1: INVENTORY THE CHANGES
Record:
- File: `drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c` (+4/-3, 7 lines)
- Functions: `dw_hdmi_rockchip_resume` renamed to
`dw_hdmi_rockchip_resume_early`; `dw_hdmi_rockchip_pm` table
- Scope: single-file surgical PM-ops change
Step 2.2: UNDERSTAND THE CODE FLOW CHANGE
Record:
- Before: `.resume` (normal phase) unconditionally calls
`dw_hdmi_resume(hdmi->hdmi)`.
- After: `.resume_early` (early phase) calls it only if
`dev_get_drvdata()` is non-NULL.
- `SET_SYSTEM_SLEEP_PM_OPS(NULL, resume)` →
`SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, resume_early)`.
- Suspend remains NULL. Hibernation thaw/restore move from thaw/restore
to thaw_early/restore_early, matching the same ordering intent.
Resume phase order is resume_noirq → resume_early → resume. HDMI
therefore always re-inits before rockchip-drm’s `.resume`.
Step 2.3: IDENTIFY THE BUG MECHANISM
Record:
- Primary: logic/correctness + hardware resume ordering. Sibling `dw-
mipi-dsi-rockchip.c` already uses `SET_LATE_SYSTEM_SLEEP_PM_OPS` with
the comment that it must run before `rockchip_drm_drv` re-enables
panels.
- Secondary: memory safety — NULL check before `hdmi->hdmi` dereference
when the platform device has probed (`component_add`) but not bound
(`platform_set_drvdata` is in bind, not probe).
Step 2.4: ASSESS THE FIX QUALITY
Record:
- Obviously correct: Linux PM runs all `resume_early` callbacks before
any `.resume`. That is the standard way to order a component ahead of
the DRM master.
- Minimal; no API or data-structure change.
- Regression risk low: same pattern as the in-tree DSI sibling; only
resume is registered; `dw_hdmi_init_hw()` only re-inits mutes, DDC
I2C, and HPD.
- NULL check does not cover `hdmi->hdmi` being `ERR_PTR` after a failed
bind; that is a leftover hole, not a regression from this patch.
===============================================================
PHASE 3: GIT HISTORY INVESTIGATION
===============================================================
Step 3.1: BLAME THE CHANGED LINES
Record:
- Buggy resume path introduced by `27c9130baef543` (“drm/rockchip:
dw_hdmi: Handle suspend/resume”, Douglas Anderson, 2019-06-04), first
in v5.3-rc1.
- That commit is an ancestor of this tree.
- That commit already documented the failure on rk3288 Chromebooks (HDMI
HPD and DDC I2C stop working after suspend) and that Chrome OS 3.14
used late/early PM ops because VOP sometimes resumed before dw-hdmi.
Mainline used normal `.resume` because the author could not reproduce
it then. This patch is the proper late/early fix for that known issue.
Step 3.2: FOLLOW THE FIXES: TAG
Record: No Fixes: tag. The introducing commit is `27c9130baef543`,
present here.
Step 3.3: CHECK FILE HISTORY FOR RELATED CHANGES
Record:
- Only two resume-related commits on this file: 27c9130baef543 (add
resume) and this one.
- Recent 6.18.y file history is unrelated (SCLIN mask, FIELD_PREP,
whitespace).
- Series-local neighbors (output_port, whitespace, empty helpers) are
not functional prerequisites of this hunk.
Step 3.4: CHECK THE AUTHOR'S OTHER COMMITS
Record: Jonas Karlman is a regular Rockchip HDMI/dw-hdmi contributor.
Heiko Stuebner (maintainer) applied the series and tested it on rk3328.
Step 3.5: CHECK FOR DEPENDENT/PREREQUISITE COMMITS
Record:
- Series v2 11/11; cover letter says patches 1–10 are cleanup / YCbCr-
Deep Color prep. Patch 11 only changes PM ops.
- `SET_LATE_SYSTEM_SLEEP_PM_OPS` exists in this tree’s
`include/linux/pm.h`.
- `dw_hdmi_resume()` exists in `drivers/gpu/drm/bridge/synopsys/dw-
hdmi.c`.
- Applies standalone. No missing helpers.
===============================================================
PHASE 4: MAILING LIST AND EXTERNAL RESEARCH
===============================================================
Step 4.1: FIND THE ORIGINAL PATCH DISCUSSION
Record:
- b4 dig:
https://patch.msgid.link/20260518193748.2482823-12-jonas@kwiboo.se
- v1 (2026-05-10): 10 patches, no resume_early change
- v2 (2026-05-18): this patch added (“v2: New patch”)
- Applied by Heiko 2026-06-02 as
`af3a9eadc11896f6677bcb7102bfb7c84be48d2d`
- No NAK. No reviewer asked for further revisions of this hunk.
- Author included CONFIG_PM_DEBUG / rtcwake test instructions and noted
a separate RK356x EHCI/OHCI clock issue, not this bug.
Step 4.2: CHECK WHO REVIEWED THE PATCH
Record: Recipients included Heiko Stuebner, Sandy Huang, Andy Yan, DRM
maintainers, dri-devel, linux-rockchip. Heiko tested and applied. No
other Acked-by/Reviewed-by on this patch.
Step 4.3: SEARCH FOR THE BUG REPORT
Record: No syzbot/bugzilla link. Real-world grounding is the 2019
Chromebook report in 27c9130baef543 plus Heiko’s rk3328 Tested-by.
Step 4.4: CHECK FOR RELATED PATCHES AND SERIES
Record: Standalone vs the rest of the v2 series. DSI sibling
`e584cdc154993` (“drm/rockchip: dsi: Reconfigure hardware on resume()”)
used the same late PM ops and had Cc: stable.
Step 4.5: CHECK STABLE MAILING LIST HISTORY
Record: UNVERIFIED. lore.kernel.org/stable returned an Anubis bot-check
page; WebFetch to lore returned 403.
===============================================================
PHASE 5: CODE SEMANTIC ANALYSIS
===============================================================
Step 5.1: IDENTIFY KEY FUNCTIONS IN THE DIFF
Record: `dw_hdmi_rockchip_resume_early` (was `dw_hdmi_rockchip_resume`);
`dw_hdmi_rockchip_pm`.
Step 5.2: TRACE CALLERS
Record: Invoked by the PM core as `dev_pm_ops.resume_early` on the
`dwhdmi-rockchip` platform driver. Triggered by system suspend/resume
(and freeze/thaw/restore via LATE_SYSTEM_SLEEP_PM_OPS). Not a syscall
hot path; it is the Chromebook/SBC sleep path.
Step 5.3: TRACE CALLEES
Record: `dev_get_drvdata` → `dw_hdmi_resume` → `dw_hdmi_init_hw` →
`initialize_hdmi_ih_mutes`, `dw_hdmi_i2c_init`, optional
`phy.ops->setup_hpd`.
Step 5.4: FOLLOW THE CALL CHAIN
Record:
- Userspace: `echo mem > /sys/power/state` / rtcwake / systemd suspend.
- DRM side: `rockchip_drm_sys_resume` → `drm_mode_config_helper_resume`
→ `drm_atomic_helper_resume` (atomic commit / enable).
- HDMI platform device is a component, not a child of the DRM device;
sibling `.resume` order is not guaranteed. `platform_set_drvdata` is
in `dw_hdmi_rockchip_bind`, while probe only does `component_add`, so
resume-before-bind can see NULL drvdata.
- Reachable on any Rockchip board with this HDMI IP and CONFIG_PM_SLEEP
(RK3288/RK3328/RK3399/RK3568, including Chromebooks).
Step 5.5: SEARCH FOR SIMILAR PATTERNS
Record:
- `dw-mipi-dsi-rockchip.c` already uses
`SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, dw_mipi_dsi_rockchip_resume)` in
this tree for the same reason.
- `dw_hdmi_qp-rockchip.c` still uses `SET_SYSTEM_SLEEP_PM_OPS`
(different HDMI QP IP, not this patch).
- imx8mp and meson dw-hdmi glue still use normal SYSTEM_SLEEP PM ops.
===============================================================
PHASE 6: CROSS-REFERENCING AGAINST THE LOCAL TREE
===============================================================
Step 6.1: DOES THE BUGGY CODE EXIST IN THIS TREE?
Record:
- Local tree: `git describe HEAD` = v6.18.53-5049-g0f0bdc2b0dffb; `make
kernelversion` = 6.18.53 (6.18.y).
- v6.18.53 still has:
`SET_SYSTEM_SLEEP_PM_OPS(NULL, dw_hdmi_rockchip_resume)`
and `dw_hdmi_resume(hdmi->hdmi)` with no NULL check
at `drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c`.
- Bug present since v5.3 (2019), long before 6.18 branched.
- Upstream commit `af3a9eadc11896` is not an ancestor of HEAD (`git
merge-base --is-ancestor` failed); this is a backport candidate, not
already in 6.18.y proper.
Step 6.2: CHECK FOR BACKPORT COMPLICATIONS
Record: Clean apply. The resume function in v6.18.53 is identical to the
parent of this change. `SET_LATE_SYSTEM_SLEEP_PM_OPS` and
`dw_hdmi_resume()` already exist here. Surrounding unbind/bridge-ref
changes from later series patches are not required.
Step 6.3: CHECK IF RELATED FIXES ARE ALREADY HERE
Record: No other resume-ordering fix on this file. DSI already has the
analogous LATE PM ops. No earlier version of this HDMI fix in 6.18.53.
===============================================================
PHASE 7: SUBSYSTEM AND MAINTAINER CONTEXT
===============================================================
Step 7.1: IDENTIFY THE SUBSYSTEM AND ITS CRITICALITY
Record: DRM Rockchip HDMI glue (`drivers/gpu/drm/rockchip/`). IMPORTANT
(common SoC display, not core mm/fs). Affects
RK3288/RK3328/RK3399/RK356x HDMI (Chromebooks, SBCs, TV boxes).
Step 7.2: ASSESS SUBSYSTEM ACTIVITY
Record: Mature driver (HDMI glue since ~2015). Resume path untouched
from 2019 until this patch. Low churn on the PM ops themselves.
===============================================================
PHASE 8: IMPACT AND RISK ASSESSMENT
===============================================================
Step 8.1: DETERMINE WHO IS AFFECTED
Record: Driver-specific / platform-specific. Users of Rockchip dw-hdmi
who suspend the system. CONFIG_PM_SLEEP. Not universal, but a well-used
platform class in Android, Chromebook, and ARM SBCs.
Step 8.2: DETERMINE THE TRIGGER CONDITIONS
Record:
- Trigger: system suspend/resume with this HDMI driver bound (and the
NULL path if probed but unbound).
- Common on laptops/Chromebooks; less so on always-on appliances.
- Unprivileged users typically cannot suspend; the HPD/I2C break is
still a real admin/user-visible failure after lid-close/sleep.
Step 8.3: DETERMINE THE FAILURE MODE SEVERITY
Record:
- Primary: HDMI HPD and DDC I2C not restored before DRM atomic enable →
hotplug/EDID/output broken after resume. HIGH for affected hardware
(display not coming back is a serious functional bug), not a kernel
panic.
- Secondary: NULL deref if resume runs before bind → oops. Less common.
HIGH if hit, MEDIUM likelihood.
- Overall: HIGH (suspend/resume display breakage on real hardware).
Step 8.4: CALCULATE RISK-BENEFIT RATIO
Record:
- Benefit: high for Rockchip HDMI suspend users; restores the ordering
Chrome OS already needed.
- Risk: very low (7 lines, established LATE PM pattern already in the
same DRM driver).
- Ratio: favor backport.
===============================================================
PHASE 9: FINAL SYNTHESIS
===============================================================
Step 9.1: COMPILE THE EVIDENCE
FOR:
- Real resume-ordering bug: DRM atomic enable before
`dw_hdmi_init_hw()`.
- User-visible: HDMI HPD/DDC broken after sleep (documented on rk3288
Chromebooks in 2019; re-tested on rk3328 in 2026).
- Same fix already used by dw-mipi-dsi-rockchip in this tree, and that
DSI change went to stable with Cc: stable.
- Possible NULL deref on resume before bind.
- 7-line surgical change; applies cleanly to v6.18.53.
- Maintainer Tested-by and Signed-off-by.
- Buggy code has been in this tree since v5.3; no missing prerequisites.
AGAINST:
- No Fixes:/Cc: stable (expected for this pipeline; not a negative).
- Buried as 11/11 in a cleanup series (but the hunk is independent and
was added specifically in v2).
- Not a panic/corruption/CVE; display-after-suspend rather than a crash.
- No extra Reviewed-by besides maintainer apply/test.
- UNVERIFIED whether stable@ already discussed rejecting it.
UNRESOLVED:
- lore.kernel.org/stable search blocked (Anubis/403).
- Incomplete NULL check if bind failed and left `hdmi->hdmi` as ERR_PTR
(pre-existing).
Step 9.2: APPLY THE STABLE RULES CHECKLIST
1. Obviously correct and tested? PASS — PM phase ordering is well-
defined; Heiko tested on rk3328.
2. Fixes a real bug that affects users? PASS — HDMI not correctly re-
inited before DRM resume; Chromebook-class hardware.
3. Important issue (crash, security, corruption, deadlock)? PASS —
suspend/resume display breakage plus a possible oops; hardware resume
workaround, same class as the DSI stable fix.
4. Small and contained? PASS — 7 lines, one file.
5. No new features or APIs? PASS.
6. Can apply to the local tree? PASS — v6.18.53 has the old resume
function and the LATE PM macro.
Step 9.3: CHECK FOR EXCEPTION CATEGORIES
Record: Hardware suspend/resume workaround on an existing driver (quirk-
class). Not a new driver, ID, or API.
Step 9.4: MAKE YOUR DECISION
This belongs on 6.18.y. The buggy `.resume` path is in this checkout,
the switch to `resume_early` is the same proven pattern as the in-tree
DSI sibling, and the patch is tiny with maintainer hardware testing.
What it solves for stable users: after system sleep on Rockchip dw-hdmi
boards, DRM can re-enable the pipeline before HDMI DDC/HPD/init, so
hotplug and HDMI output fail. Moving the callback to `resume_early`
forces `dw_hdmi_init_hw()` first, and skips a NULL drvdata deref if the
component never bound.
Risk is low; benefit is a real resume fix on shipping SoCs. No series
dependencies are required for this hunk.
Verification:
- [Phase 1] Parsed tags: Tested-by Heiko (rk3328), SOB Jonas + Heiko,
Link msgid ...-12; no Fixes/Reported-by/Cc:stable
- [Phase 1] Cover letter via b4 mbox: patch 11/11 of v2 “Misc cleanup”;
“v2: New patch”; Heiko “Series: Tested-by” and Applied
- [Phase 2] Diff: rename resume→resume_early, add `if (hdmi)`,
SET_SYSTEM_SLEEP→SET_LATE_SYSTEM_SLEEP; +4/-3
- [Phase 2] Confirmed LATE_SYSTEM_SLEEP_PM_OPS maps resume_fn to
`.resume_early` in include/linux/pm.h:321-327,350-351
- [Phase 2] Confirmed rockchip_drm_drv.c:260-262 still uses
SET_SYSTEM_SLEEP_PM_OPS for sys_resume
- [Phase 2] drm_mode_config_helper_resume() calls
drm_atomic_helper_resume() (drm_modeset_helper.c:250)
- [Phase 3] git blame parent: resume added in 27c9130baef543 (Douglas
Anderson, 2019)
- [Phase 3] git show 27c9130baef543: documented Chromebook HPD/I2C break
and Chrome OS late/early PM ops
- [Phase 3] git describe --contains 27c9130baef543 → v5.3-rc1; git
merge-base --is-ancestor 27c9130baef543 HEAD → yes
- [Phase 3] git log --oneline --grep resume_early --
drivers/gpu/drm/rockchip/ → only this commit
- [Phase 4] b4 dig -c af3a9eadc11896: lore thread found; v1 had no this
patch; v2 added it; applied as af3a9eadc11896
- [Phase 4] b4 dig -a: v1 2026-05-10, v2 2026-05-18
- [Phase 4] b4 dig -w: Heiko, dri-devel, linux-rockchip CC’d
- [Phase 4] b4 dig -m /tmp/thread.mbox: no NAKs; Heiko tested+applied
- [Phase 4] lore.kernel.org WebFetch 403; stable search Anubis-blocked →
UNVERIFIED stable@ discussion
- [Phase 5] Callers: PM core resume_early on dwhdmi-rockchip; callees
dw_hdmi_resume→dw_hdmi_init_hw
- [Phase 5] platform_set_drvdata in bind (line 580), probe only
component_add — NULL drvdata on unbound resume is real
- [Phase 5] Sibling dw-mipi-dsi-rockchip.c:1346 already
SET_LATE_SYSTEM_SLEEP_PM_OPS in this tree; introduced by e584cdc154993
with Cc: stable
- [Phase 6] git describe HEAD: v6.18.53-5049-g0f0bdc2b0dffb; make
kernelversion 6.18.53
- [Phase 6] git show v6.18.53:dw_hdmi-rockchip.c has
SET_SYSTEM_SLEEP_PM_OPS + unchecked dw_hdmi_resume
- [Phase 6] git merge-base --is-ancestor af3a9eadc11896 HEAD → no (not
in 6.18.y proper)
- [Phase 6] Resume hunk in v6.18.53 identical to parent of this change;
SET_LATE and dw_hdmi_resume exist in v6.18.53
- [Phase 8] Failure mode: HDMI broken after suspend (HIGH); possible
NULL oops (HIGH if hit)
- UNVERIFIED: whether stable@ previously rejected this patch (lore
blocked)
**YES**
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 727cdf768161a..ff34aeef3a6ff 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -635,17 +635,18 @@ static void dw_hdmi_rockchip_remove(struct platform_device *pdev)
component_del(&pdev->dev, &dw_hdmi_rockchip_ops);
}
-static int __maybe_unused dw_hdmi_rockchip_resume(struct device *dev)
+static int __maybe_unused dw_hdmi_rockchip_resume_early(struct device *dev)
{
struct rockchip_hdmi *hdmi = dev_get_drvdata(dev);
- dw_hdmi_resume(hdmi->hdmi);
+ if (hdmi)
+ dw_hdmi_resume(hdmi->hdmi);
return 0;
}
static const struct dev_pm_ops dw_hdmi_rockchip_pm = {
- SET_SYSTEM_SLEEP_PM_OPS(NULL, dw_hdmi_rockchip_resume)
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, dw_hdmi_rockchip_resume_early)
};
struct platform_driver dw_hdmi_rockchip_pltfm_driver = {
--
2.53.0
next prev parent reply other threads:[~2026-10-19 14:03 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 13:44 [PATCH AUTOSEL 6.18-6.12] net: dsa: mt7530: check CORE_PLL_GROUP4 access in mt7531_setup() Sasha Levin
2026-10-19 13:44 ` [PATCH AUTOSEL 6.18-5.10] iommu/rockchip: Clear stale page faults before enabling stall Sasha Levin
2026-10-19 13:44 ` [PATCH AUTOSEL 6.18-6.6] iommu/qcom: Enable clocks before hardware access in qcom_iommu_ctx_probe() Sasha Levin
2026-10-19 13:45 ` [PATCH AUTOSEL 6.18] clk: clocking-wizard: fix clock difference detection Sasha Levin
2026-10-19 13:45 ` [PATCH AUTOSEL 6.18] clk: mediatek: mt6735-vencsys: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:45 ` [PATCH AUTOSEL 6.18-6.1] net: stmmac: fix device node reference leaks in stmmac_mtl_setup() Sasha Levin
2026-10-19 13:45 ` [PATCH AUTOSEL 6.18] arm64/runtime-const: Use aarch64_insn_patch_text_nosync() for patching Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18-5.10] iommu/qcom: Publish pgtbl_ops before releasing init_mutex Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18-6.1] wifi: mt76: mt7921: fix memory leak when skb_linearize fails in mcu rx event Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18-5.15] wifi: mt76: set the EOSP bit in the QoS header of the last released frame Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18-5.10] usb: mtu3: Fix double dereference in TP_printk Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18] wifi: mt76: wed: fix kernel panic on non-DBDC MT7986 Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18-5.10] arm64: mm: fix accidental linear mapping of no-map reserved memory Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18] perf/arm-cmn: Add workarounds for CMN-S3 on Graviton5 Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18] soc: mediatek: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-5.10] net: dsa: mt7530: error out on failed PHY_IAC command writes Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-6.12] net: dsa: mt7530: check bus->read() error in core_rmw() Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-5.15] wifi: mt76: mt7603: free beacon SKB on error Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-6.1] perf: marvell: Cancel CN10K DDR PMU hrtimer on device remove Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-6.1] wifi: mt76: mt7915: configure noise floor reporting on reset Sasha Levin
2026-10-19 13:48 ` [PATCH AUTOSEL 6.18-6.6] wifi: mt76: mt7603: file buffered frames under the TID reported to mac80211 Sasha Levin
2026-10-19 13:48 ` [PATCH AUTOSEL 6.18-5.10] wifi: mt76: mt7603: fix U-APSD service period termination Sasha Levin
2026-10-19 13:48 ` [PATCH AUTOSEL 6.18] soc: amlogic: meson-clk-measure: remove debugfs tree Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-6.12] iommu/tegra241-cmdqv: Rate-limit the error ISR's log message Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-6.12] mmc: sdhci-of-ma35d1: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-5.10] clk: imx: imx8qxp: " Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-5.15] wifi: mt76: mt7603: add 0x7592 EEPROM chip ID Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18] memory: stm32_omm: initialize ret in stm32_omm_set_amcr Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-6.12] iommu/arm-smmu-qcom: Add SM8450 MDSS compatible Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-6.1] wifi: mt76: mt7615: fix NULL deref in mt7615_mac_set_rates Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-5.10] clk: zynq: handle kasprintf() failure in periph_clk registration Sasha Levin
2026-10-19 13:50 ` [PATCH AUTOSEL 6.18-5.10] media: cec: stm32: return an error when log-address wait times out Sasha Levin
2026-10-19 13:50 ` [PATCH AUTOSEL 6.18-5.10] iommu/qcom: Check pm_runtime_resume_and_get() return in probe Sasha Levin
2026-10-19 13:50 ` Sasha Levin [this message]
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.10] rtc: brcmstb-waketimer: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.10] net: stmmac: use dma_addr_t for DMA addresses Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.10] wifi: mt76: mt76x02: report rx FCS errors to mac80211 Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.10] firmware: imx: scu: manage mailbox channels and global handle Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18] clk: mediatek: mt6735-vdecsys: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.15] net: stmmac: raise TX completion interrupt at the end of an xmit burst Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-6.6] net: pcs: mtk-lynxi: check regmap reads in mtk_pcs_lynxi_get_state() Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-5.10] clk: imx: imx8qxp-lpcg: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-5.10] soc: ixp4xx: qmgr: " Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-6.12] RISC-V: perf: fix resource cleanup on driver probe failure Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-6.6] spi: bcmbca-hsspi: return error from failed controller suspend Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-6.12] i2c: imx-lpi2c: properly unwind resources on probe failure Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18] wifi: mt76: mt7603: restore hardware PS buffering after a service period Sasha Levin
2026-10-19 13:53 ` [PATCH AUTOSEL 6.18-6.12] net: ethernet: mtk_wed: increase WED v2 WDMA RESV_BUFF to 0x80 Sasha Levin
2026-10-19 13:53 ` [PATCH AUTOSEL 6.18-5.10] clk: sunxi-ng: fix ccu probe clock unregister on error Sasha Levin
2026-10-19 13:53 ` [PATCH AUTOSEL 6.18-5.10] ARM: OMAP2+: Add CFI type for omap4_finish_suspend Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261019135441.1420968-349-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=airlied@gmail.com \
--cc=andyshrk@163.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=jonas@kwiboo.se \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=patches@lists.linux.dev \
--cc=simona@ffwll.ch \
--cc=stable@vger.kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox