From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Prashant Rahul <prashantrahul23@gmail.com>,
Felix Fietkau <nbd@nbd.name>, Sasha Levin <sashal@kernel.org>,
lorenzo@kernel.org, ryder.lee@mediatek.com,
matthias.bgg@gmail.com, angelogioacchino.delregno@collabora.com,
linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH AUTOSEL 6.18-6.1] wifi: mt76: mt7921: fix memory leak when skb_linearize fails in mcu rx event
Date: Mon, 19 Oct 2026 09:46:08 -0400 [thread overview]
Message-ID: <20261019135441.1420968-77-sashal@kernel.org> (raw)
In-Reply-To: <20261019135441.1420968-1-sashal@kernel.org>
From: Prashant Rahul <prashantrahul23@gmail.com>
[ Upstream commit 4361f1660101270611eb5dc39799f620b35f2e4d ]
The ownership of sk_buff skb is passed to mt7921_queue_rx_skb, each
path inside it under the switch case handles cleaning of skb and it
is true for mt7921_mcu_rx_event as well.
mt7921_mcu_rx_event, on a success path, either queues skb via
mt76_mcu_rx_event or cleans it immediately inside
mt7921_mcu_uni_rx_unsolicited_event.
However inside mt7921_mcu_rx_event, if skb_linearize fails, the function
returns immediately and never bothers cleaning skb which leaks skb.
Since skb is fully owned at this point, it is safe to call
dev_kfree_skb which fixes the leak.
Granted, the skb_linearize failure is rare as it can only fail under
heavy memory usage, but at the same time, leaking memory under heavy
memory usage can worsen the OOM condition.
Signed-off-by: Prashant Rahul <prashantrahul23@gmail.com>
Link: https://patch.msgid.link/20260716-mt7921-mem-leak-v1-1-6e9c0ea19f63@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
LLM Generated explanations, may be completely bogus:
# Stable backport analysis: mt7921 MCU RX skb leak
**Tree decided:** `pending-6.6` (6.6.157), SHA `04810563abb71`.
At the start of this evaluation `git describe`/`make kernelversion`
reported **6.6.157**. The working copy later moved to v7.3-rc4; every
presence/absence claim below was rechecked against **`pending-6.6`**,
not that later checkout.
The candidate is mainline `4361f16601012` (`wifi: mt76: mt7921: fix
memory leak when skb_linearize fails in mcu rx event`).
---
## PHASE 1: COMMIT MESSAGE FORENSICS
**Step 1.1 — Subject**
Record: **[wifi: mt76: mt7921]** **[fix]** memory leak when
`skb_linearize` fails in MCU RX event.
**Step 1.2 — Tags**
- `Signed-off-by: Prashant Rahul <prashantrahul23@gmail.com>` (author)
- `Link: https://patch.msgid.link/20260716-mt7921-mem-
leak-v1-1-6e9c0ea19f63@gmail.com`
- `Signed-off-by: Felix Fietkau <nbd@nbd.name>` (mt76 maintainer;
applied the patch)
- No `Fixes:`, `Reported-by:`, `Tested-by:`, `Reviewed-by:`, `Acked-
by:`, or `Cc: stable` (absence of Fixes/Cc-stable is expected for this
review).
Record: Maintainer SOB; msgid shows **v1 patch 1/1** (standalone).
**Step 1.3 — Body**
Record:
- **Bug:** `mt7921_queue_rx_skb` transfers skb ownership into
`mt7921_mcu_rx_event`. Success paths free or queue the skb. If
`skb_linearize()` fails, the function returns without freeing.
- **Symptom:** skb leak. Author notes failure is rare (ENOMEM) but
leaking under memory pressure can worsen OOM.
- **Root cause:** missing `dev_kfree_skb` on the linearize error path.
- **Version info in message:** none.
**Step 1.4 — Hidden bug fix?**
Record: **No disguise.** This is an explicit leak fix, not cleanup-as-
fix.
---
## PHASE 2: DIFF ANALYSIS
**Step 2.1 — Inventory**
Record:
- File: `drivers/net/wireless/mediatek/mt76/mt7921/mcu.c` (**+3 / −1**)
- Function: `mt7921_mcu_rx_event`
- Scope: **single-file surgical fix**
**Step 2.2 — Flow**
Before (pending-6.6 `mcu.c:312-313`):
```
if (skb_linearize(skb))
return;
```
After:
```
if (skb_linearize(skb)) {
dev_kfree_skb(skb);
return;
}
```
Record: **error path only.** Success paths unchanged.
**Step 2.3 — Bug mechanism**
Record: **[resource leak]** On `skb_linearize` failure (`-ENOMEM` for
nonlinear skbs), the still-owned skb is dropped. Caller
`mt7921_queue_rx_skb` does not free after `PKT_TYPE_RX_EVENT`. Other
switch arms in the same caller (`dev_kfree_skb` / `napi_consume_skb`)
and other arms of `mt7921_mcu_rx_event` (`dev_kfree_skb`,
`mt76_mcu_rx_event` queue) already consume the skb.
**Step 2.4 — Fix quality**
Record: **Obviously correct.** Matches established kernel pattern (`if
(skb_linearize(skb)) { dev_kfree_skb(_any)(skb); return; }`). Same free
helper already used in this MCU event path. No API/lock/data-structure
change. Regression risk: **very low** (could only be a double-free if
linearize already freed; it does not — see Phase 5).
---
## PHASE 3: GIT HISTORY
**Step 3.1 — Blame**
Record: Leak introduced by **`f0ff5d3aa64812`** (`mt76: mt7921: make all
event parser reusable between mt7921s and mt7921e`, Sean Wang,
2021-10-19). That commit added `skb_linearize` + early return and never
freed on failure. Present since ~5.16-era; **`git merge-base --is-
ancestor f0ff5d3aa64812 pending-6.6` succeeds.**
**Step 3.2 — Fixes: tag**
Record: **None.** Introducer identified by blame: `f0ff5d3aa64812`,
which **is** in this 6.6 tree.
**Step 3.3 — File history (pending-6.6)**
Recent 6.6 work on this file is CLC firmware validation, not MCU RX. No
competing leak fix. Record: **standalone**; not part of a multi-patch
series.
**Step 3.4 — Author**
Prashant Rahul has **no other commits** in this tree’s mt76 history.
Applied by **Felix Fietkau**, listed maintainer of MEDIATEK MT76 in
`MAINTAINERS`. Record: one-off contributor; **maintainer-applied**.
**Step 3.5 — Dependencies**
The hunk only needs `mt7921_mcu_rx_event` + `skb_linearize` +
`dev_kfree_skb`, all present. Mailing-list patch context matches 6.6
(the extra `MCU_EVENT_RSSI_NOTIFY` in later mainline is **below** the
change). Record: **applies standalone**.
---
## PHASE 4: MAILING LIST / EXTERNAL
**Step 4.1 — Original discussion**
- `b4 dig -c <msgid>` / `b4 mbox`: no match (404).
- lore.kernel.org: **403**.
- Recovered from Openwall and Ratatoskr:
https://lists.openwall.net/linux-kernel/2026/07/16/1707
msgid `20260716-mt7921-mem-leak-v1-1-6e9c0ea19f63@gmail.com`
Record: **v1, single patch**, applied as submitted (`4361f16601012`
matches that diff). No v2/v3.
**Step 4.2 — Recipients (`b4 dig -w` unavailable; headers from
Openwall)**
To: Felix Fietkau, Lorenzo Bianconi, Ryder Lee, Shayne Chen, Sean Wang
(mt76 maintainers/reviewers), plus MediaTek ARM contacts. Cc: linux-
wireless, linux-kernel, linux-mediatek, linux-arm-kernel. Record:
**correct maintainer set**.
**Step 4.3 — Bug report**
Record: **No syzbot/bugzilla.** Static ownership analysis; author states
the leak is rare.
**Step 4.4 — Series**
Record: **1/1 standalone.** No sibling mt7925/mt7915 patches required
for this tree (only mt7921 has this `skb_linearize` in pending-6.6).
**Step 4.5 — Stable list**
Search for this subject on lore stable returned unrelated hits. Record:
**no prior stable NAK found** (lore 403 limited this).
---
## PHASE 5: CODE SEMANTIC ANALYSIS
**Step 5.1 — Functions**
Record: `mt7921_mcu_rx_event` only.
**Step 5.2 — Callers**
`mt7921_queue_rx_skb()` (`mac.c`) `case PKT_TYPE_RX_EVENT:` calls it and
does **not** free afterwards.
That `rx_skb` hook is registered for **PCIe, USB, and SDIO**:
- `mt7921/pci.c`, `usb.c`, `sdio.c` → `.rx_skb = mt7921_queue_rx_skb`
- Invoked from `mt76_dma_rx_process` (NAPI), `mt76u` USB RX,
`mt76s_process_rx_queue` (SDIO)
Record: **hot RX path** for MT7921E/S/U.
**Step 5.3 — Callees**
`skb_linearize` → `__skb_linearize` → `__pskb_pull_tail`; returns
`-ENOMEM` on failure and **does not free** the skb
(`include/linux/skbuff.h`: “If there is no free memory -ENOMEM is
returned”). Success continues to `mt7921_mcu_uni_rx_unsolicited_event` /
`mt76_mcu_rx_event` / `mt7921_mcu_rx_unsolicited_event`.
**Step 5.4 — Reachability**
Nonlinear MCU events are real:
- SDIO `mt76s_build_rx_skb` uses `skb_add_rx_frag` when payload >
`MT_SKB_HEAD_LEN` — this is **why** `f0ff5d3aa64812` added linearize
(“paged fragment skb for the SDIO device”).
- USB `mt76u_build_rx_skb` same pattern.
- DMA `mt76_add_fragment` builds fraglists for multi-buffer RX.
Record: reachable from normal firmware MCU events; unprivileged users
can generate MCU traffic by using WiFi. Failure needs **ENOMEM during
linearize**.
**Step 5.5 — Similar patterns**
In pending-6.6, `skb_linearize` appears **only here** under mt76. No
duplicate site left unfixed in this tree.
---
## PHASE 6: LOCAL TREE (pending-6.6 / 6.6.157)
**Step 6.1 — Buggy code present?**
Record: **Yes.**
`pending-6.6:drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:312-313`:
```
if (skb_linearize(skb))
return;
```
`git merge-base --is-ancestor 4361f16601012 pending-6.6` → **false**
(fix not here).
`git merge-base --is-ancestor f0ff5d3aa64812 pending-6.6` → **true**
(bug intro is here).
Bug age: **2021**, well before 6.6.
**Step 6.2 — Backport difficulty**
Submitted hunk is 4 lines around `skb_linearize` with context that
matches 6.6 (`struct mt76_connac2_mcu_rxd *rxd` then the if).
`MCU_EVENT_RSSI_NOTIFY` is later mainline-only context **below** the
edit. Record: **clean apply / trivial**.
**Step 6.3 — Related fixes already here?**
`git log --grep=skb_linearize` on mt76 in this tree: **empty**. No
alternate fix. Record: **none**.
---
## PHASE 7: SUBSYSTEM CONTEXT
**Step 7.1**
Record: **wifi / mt76 / mt7921**. Criticality: **IMPORTANT** — MT7921E
is a common laptop WiFi 6 adapter (PCIe); USB/SDIO variants exist
(`MT7921E/S/U` in Kconfig). Not core mm/net, not staging.
**Step 7.2**
Record: Mature driver (MCU support from `1c099ab44727c8`, 2021). 6.6
still receives mt76 bugfixes (CLC, etc.).
---
## PHASE 8: IMPACT AND RISK
**Step 8.1 — Who is affected**
Record: **driver-specific**, users with MediaTek MT7921 (very common on
laptops). Config: `CONFIG_MT7921E/S/U`.
**Step 8.2 — Trigger**
Record: Firmware MCU RX event whose skb is nonlinear, **and**
`skb_linearize` fails (GFP/ENOMEM). Unprivileged WiFi use can generate
events; the failure itself is **uncommon**. SDIO long events are the
originally cited nonlinear case; USB/DMA can also fragment.
**Step 8.3 — Failure mode**
Record: **skb leak under memory pressure**, which can deepen OOM. Not a
panic/UAF. Severity: **MEDIUM–HIGH** (hot-path leak, not a one-time
probe leak).
**Step 8.4 — Risk/benefit**
- Benefit: **medium** — stops a real leak on a widely shipped chip; most
valuable when the system is already under memory pressure.
- Risk: **very low** — 3 lines, error path, same free as sibling paths.
- Ratio: **favor backport**.
---
## PHASE 9: SYNTHESIS
**Step 9.1 — Evidence**
**For:**
- Real leak with verified ownership (caller does not free).
- Code and introducer are in 6.6.157; fix is not.
- Tiny, obviously correct, maintainer-applied.
- MT7921 is production hardware, not staging.
- Leak on an RX path under OOM is a stability issue, not a style
cleanup.
**Against:**
- Trigger is rare (`skb_linearize` ENOMEM).
- No crash/syzbot/CVE.
- No explicit `Cc: stable` (not a negative per the review rules).
**Unresolved:** Full lore thread (403/404); no reviewer comments beyond
maintainer merge. Does not change the technical verdict.
**Step 9.2 — Stable rules**
1. Obviously correct and tested — **PASS** (3-line ownership fix; in
mainline via Felix).
2. Real bug affecting users — **PASS** (skb leak on MT7921 MCU RX).
3. Important (crash/security/corruption/deadlock) — **PASS** as an RX-
path leak that can worsen OOM; not a panic, but in the leak class
stable regularly takes.
4. Small and contained — **PASS** (4 lines, one function).
5. No new features/APIs — **PASS**.
6. Can apply to this tree — **PASS** (hunk matches 6.6).
**Step 9.3 — Exceptions**
Record: none needed (not an ID/quirk/DT/build/doc exception). Ordinary
small leak fix.
**Step 9.4 — Decision**
Backport to **this** 6.6.157 tree. The bug exists here, the fix is
surgical, and regression risk is negligible.
---
## What the commit solves for stable users
On MT7921, firmware MCU events are handed to `mt7921_mcu_rx_event` with
full skb ownership. Nonlinear events (especially SDIO, also USB/DMA
fragments) are linearized first. If that allocation fails, 6.6 returns
and leaks the skb. Under memory pressure that leak makes OOM worse.
Adding `dev_kfree_skb(skb)` on that path closes the leak without
changing success behavior.
## Risk vs benefit
Benefit is a real leak fix on a common WiFi chip; risk is a three-line
error-path free that matches existing code in the same function.
## Concerns
None material: no prerequisites, no API change, no locking, expected
clean apply. Trigger rarity is the only weak point and is not enough to
reject a contained leak fix.
---
## Verification
- **[Phase 1]** Parsed tags: author SOB, Link msgid, Felix Fietkau SOB;
no Fixes/Reported-by/Cc-stable.
- **[Phase 2]** Diff: +3/−1 in `mt7921_mcu_rx_event`; adds
`dev_kfree_skb` on `skb_linearize` failure.
- **[Phase 3]** `git blame` on pending-6.6: leak from `f0ff5d3aa64812`
(2021-10-19); `git merge-base --is-ancestor f0ff5d3aa64812
pending-6.6` true.
- **[Phase 3]** `git show f0ff5d3aa64812`: added `if
(skb_linearize(skb)) return;` with no free.
- **[Phase 3]** `git log --author=Prashant Rahul`: no other mt76 commits
in this history.
- **[Phase 4]** Openwall/Ratatoskr: v1 1/1, same diff as
`4361f16601012`; mt76 maintainers on To:.
- **[Phase 4]** `b4 mbox` msgid: 404; lore.kernel.org: 403.
**UNVERIFIED:** full review replies / explicit stable nomination.
- **[Phase 5]** Callers: `mt7921_queue_rx_skb` (no free on
`PKT_TYPE_RX_EVENT`); hooked from pci/usb/sdio `.rx_skb`.
- **[Phase 5]** `skb_linearize` documented to return `-ENOMEM` and not
free; USB/SDIO `skb_add_rx_frag` makes nonlinear skbs.
- **[Phase 6]** `git describe` at start: `p-6.6-3-g04810563abb71`, `make
kernelversion` 6.6.157.
- **[Phase 6]** `git grep` on `pending-6.6`: leak at `mcu.c:312-313`.
- **[Phase 6]** `git merge-base --is-ancestor 4361f16601012 pending-6.6`
false.
- **[Phase 8]** Failure mode: skb leak under ENOMEM on MCU RX; severity
MEDIUM–HIGH.
- **UNVERIFIED:** complete lore thread text after 403.
The fix is small, matches stable leak-fix practice, and the buggy code
is in this 6.6 tree.
**YES**
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index 8c8b35cba856c..f63ef02542387 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -354,8 +354,10 @@ void mt7921_mcu_rx_event(struct mt792x_dev *dev, struct sk_buff *skb)
{
struct mt76_connac2_mcu_rxd *rxd;
- if (skb_linearize(skb))
+ if (skb_linearize(skb)) {
+ dev_kfree_skb(skb);
return;
+ }
rxd = (struct mt76_connac2_mcu_rxd *)skb->data;
--
2.53.0
next prev parent reply other threads:[~2026-10-19 13:56 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 13:44 [PATCH AUTOSEL 6.18-6.12] net: dsa: mt7530: check CORE_PLL_GROUP4 access in mt7531_setup() Sasha Levin
2026-10-19 13:44 ` [PATCH AUTOSEL 6.18-5.10] iommu/rockchip: Clear stale page faults before enabling stall Sasha Levin
2026-10-19 13:44 ` [PATCH AUTOSEL 6.18-6.6] iommu/qcom: Enable clocks before hardware access in qcom_iommu_ctx_probe() Sasha Levin
2026-10-19 13:45 ` [PATCH AUTOSEL 6.18] clk: clocking-wizard: fix clock difference detection Sasha Levin
2026-10-19 13:45 ` [PATCH AUTOSEL 6.18] clk: mediatek: mt6735-vencsys: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:45 ` [PATCH AUTOSEL 6.18-6.1] net: stmmac: fix device node reference leaks in stmmac_mtl_setup() Sasha Levin
2026-10-19 13:45 ` [PATCH AUTOSEL 6.18] arm64/runtime-const: Use aarch64_insn_patch_text_nosync() for patching Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18-5.10] iommu/qcom: Publish pgtbl_ops before releasing init_mutex Sasha Levin
2026-10-19 13:46 ` Sasha Levin [this message]
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18-5.15] wifi: mt76: set the EOSP bit in the QoS header of the last released frame Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18-5.10] usb: mtu3: Fix double dereference in TP_printk Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18] wifi: mt76: wed: fix kernel panic on non-DBDC MT7986 Sasha Levin
2026-10-19 13:46 ` [PATCH AUTOSEL 6.18-5.10] arm64: mm: fix accidental linear mapping of no-map reserved memory Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18] perf/arm-cmn: Add workarounds for CMN-S3 on Graviton5 Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18] soc: mediatek: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-5.10] net: dsa: mt7530: error out on failed PHY_IAC command writes Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-6.12] net: dsa: mt7530: check bus->read() error in core_rmw() Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-5.15] wifi: mt76: mt7603: free beacon SKB on error Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-6.1] perf: marvell: Cancel CN10K DDR PMU hrtimer on device remove Sasha Levin
2026-10-19 13:47 ` [PATCH AUTOSEL 6.18-6.1] wifi: mt76: mt7915: configure noise floor reporting on reset Sasha Levin
2026-10-19 13:48 ` [PATCH AUTOSEL 6.18-6.6] wifi: mt76: mt7603: file buffered frames under the TID reported to mac80211 Sasha Levin
2026-10-19 13:48 ` [PATCH AUTOSEL 6.18-5.10] wifi: mt76: mt7603: fix U-APSD service period termination Sasha Levin
2026-10-19 13:48 ` [PATCH AUTOSEL 6.18] soc: amlogic: meson-clk-measure: remove debugfs tree Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-6.12] iommu/tegra241-cmdqv: Rate-limit the error ISR's log message Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-6.12] mmc: sdhci-of-ma35d1: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-5.10] clk: imx: imx8qxp: " Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-5.15] wifi: mt76: mt7603: add 0x7592 EEPROM chip ID Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18] memory: stm32_omm: initialize ret in stm32_omm_set_amcr Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-6.12] iommu/arm-smmu-qcom: Add SM8450 MDSS compatible Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-6.1] wifi: mt76: mt7615: fix NULL deref in mt7615_mac_set_rates Sasha Levin
2026-10-19 13:49 ` [PATCH AUTOSEL 6.18-5.10] clk: zynq: handle kasprintf() failure in periph_clk registration Sasha Levin
2026-10-19 13:50 ` [PATCH AUTOSEL 6.18-5.10] media: cec: stm32: return an error when log-address wait times out Sasha Levin
2026-10-19 13:50 ` [PATCH AUTOSEL 6.18-5.10] iommu/qcom: Check pm_runtime_resume_and_get() return in probe Sasha Levin
2026-10-19 13:50 ` [PATCH AUTOSEL 6.18-5.10] drm/rockchip: dw_hdmi: Use resume_early pm ops for system suspend Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.10] rtc: brcmstb-waketimer: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.10] net: stmmac: use dma_addr_t for DMA addresses Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.10] wifi: mt76: mt76x02: report rx FCS errors to mac80211 Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.10] firmware: imx: scu: manage mailbox channels and global handle Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18] clk: mediatek: mt6735-vdecsys: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-5.15] net: stmmac: raise TX completion interrupt at the end of an xmit burst Sasha Levin
2026-10-19 13:51 ` [PATCH AUTOSEL 6.18-6.6] net: pcs: mtk-lynxi: check regmap reads in mtk_pcs_lynxi_get_state() Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-5.10] clk: imx: imx8qxp-lpcg: add missing MODULE_DEVICE_TABLE() Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-5.10] soc: ixp4xx: qmgr: " Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-6.12] RISC-V: perf: fix resource cleanup on driver probe failure Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-6.6] spi: bcmbca-hsspi: return error from failed controller suspend Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18-6.12] i2c: imx-lpi2c: properly unwind resources on probe failure Sasha Levin
2026-10-19 13:52 ` [PATCH AUTOSEL 6.18] wifi: mt76: mt7603: restore hardware PS buffering after a service period Sasha Levin
2026-10-19 13:53 ` [PATCH AUTOSEL 6.18-6.12] net: ethernet: mtk_wed: increase WED v2 WDMA RESV_BUFF to 0x80 Sasha Levin
2026-10-19 13:53 ` [PATCH AUTOSEL 6.18-5.10] clk: sunxi-ng: fix ccu probe clock unregister on error Sasha Levin
2026-10-19 13:53 ` [PATCH AUTOSEL 6.18-5.10] ARM: OMAP2+: Add CFI type for omap4_finish_suspend Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261019135441.1420968-77-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=nbd@nbd.name \
--cc=patches@lists.linux.dev \
--cc=prashantrahul23@gmail.com \
--cc=ryder.lee@mediatek.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox