[PATCH v2 0/7] sy7636a: power the panel only during updates

[PATCH v2 0/7] sy7636a: power the panel only during updates

[Pablo Mazzini]

The SY7636A hwmon driver keeps VCOM on from probe, so a display driver
can not power the panel only during updates.

Read the temperature only while the rails are on instead, and bind the
regulator to the I2C device directly, with the hwmon driver as its
auxiliary driver. The regulator also gains VCOM voltage control and
waits for power good on enable.

Patch 6 depends on patches 1-5 and touches the regulator, hwmon and
MFD drivers.

Tested on a PocketBook Verse (B288).

v2:
- drop the DT patch keeping VCOM always-on (Andreas)
- patch 3: only wait for power good, VCOM_EN stays as it was (Andreas)
- new patch 4: fix negative temperatures
- keep the temperature in drivers/hwmon as an auxiliary driver of the
  regulator, instead of moving it into the regulator driver (Guenter,
  Andreas)
- patch 5: no VCOM enable at probe, which also removes the probe race
- patch 5: read power good and the temperature in one transfer (Andreas)

Pablo Mazzini (7):
  regulator: sy7636a: fix the chip name
  regulator: sy7636a: add VCOM voltage control
  regulator: sy7636a: wait for power good on enable
  hwmon: sy7636a: fix negative temperatures
  hwmon: sy7636a: read the temperature only while the rails are on
  regulator: sy7636a: bind to the I2C device directly
  ARM: imx_v6_v7_defconfig: drop the SY7636A MFD option

 arch/arm/configs/imx_v6_v7_defconfig  |   1 -
 drivers/hwmon/Kconfig                 |   2 +-
 drivers/hwmon/sy7636a-hwmon.c         |  58 +++++----
 drivers/mfd/Kconfig                   |  10 --
 drivers/mfd/simple-mfd-i2c.c          |  11 --
 drivers/regulator/Kconfig             |   6 +-
 drivers/regulator/sy7636a-regulator.c | 163 ++++++++++++++++++++------
 include/linux/mfd/sy7636a.h           |  34 ------
 8 files changed, 162 insertions(+), 123 deletions(-)
 delete mode 100644 include/linux/mfd/sy7636a.h


base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
-- 
2.52.0

[PATCH v2 7/7] ARM: imx_v6_v7_defconfig: drop the SY7636A MFD option

[Pablo Mazzini]

The SY7636A is no longer bound through an MFD.

Signed-off-by: Pablo Mazzini <pmazzini@gmail.com>
---
 arch/arm/configs/imx_v6_v7_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index ed588add8d31..f02b5605e533 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -239,7 +239,6 @@ CONFIG_MFD_DA9062=y
 CONFIG_MFD_DA9063=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
-CONFIG_MFD_SY7636A=y
 CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_ROHM_BD71828=y
-- 
2.52.0