* [PATCH] arm64: dts: freescale: imx95-aquila: Add ath12k calibration variant
@ 2026-11-18 12:38 Vitor Soares
2026-11-18 18:31 ` Francesco Dolcini
0 siblings, 1 reply; 2+ messages in thread
From: Vitor Soares @ 2026-11-18 12:38 UTC (permalink / raw)
To: Francesco Dolcini, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: Vitor Soares, linux-bsp, devicetree, imx, linux-arm-kernel,
linux-kernel, ath12k
From: Vitor Soares <vitor.soares@toradex.com>
The Aquila iMX95 has a Silex SX-PCEBE Wi-Fi module (WCN7850). The
module reports the same PCI and QMI IDs as other WCN7850 designs, and
its board data also comes in variants for different regulatory domains
(US/EU/JP, UK/CA low and high). The IDs alone therefore cannot identify
the right board data.
Describe the Wi-Fi device behind the PCIe1 root port and set
qcom,calibration-variant to the US/EU/JP board data.
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
---
Depends on the qcom,ath12k binding changes in ath-next:
- 75bc725cd92b ("dt-bindings: wireless: ath12k: allow calibration variant for WCN7850")
- "dt-bindings: wireless: ath12k: Make WCN7850 supplies optional"
https://lore.kernel.org/all/20261117174154.549590-5-ivitro@gmail.com/
Until they are merged, dtbs_check reports the missing supplies and
qcom,calibration-variant for this node.
---
arch/arm64/boot/dts/freescale/imx95-aquila.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95-aquila.dtsi b/arch/arm64/boot/dts/freescale/imx95-aquila.dtsi
index a1870f7b2eca..a73d137af2c4 100644
--- a/arch/arm64/boot/dts/freescale/imx95-aquila.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-aquila.dtsi
@@ -621,6 +621,14 @@ &pcie1 {
status = "okay";
};
+&pcie1_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+ qcom,calibration-variant = "Silex_SX-PCEBE_US_EU_JP";
+ };
+};
+
/* Aquila I2S_1 */
&sai2 {
pinctrl-names = "default";
base-commit: 33adc96ac217d6e95b7c44ac383c19ca4ae2ff52
--
2.53.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: freescale: imx95-aquila: Add ath12k calibration variant
2026-11-18 12:38 [PATCH] arm64: dts: freescale: imx95-aquila: Add ath12k calibration variant Vitor Soares
@ 2026-11-18 18:31 ` Francesco Dolcini
0 siblings, 0 replies; 2+ messages in thread
From: Francesco Dolcini @ 2026-11-18 18:31 UTC (permalink / raw)
To: Vitor Soares
Cc: Francesco Dolcini, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vitor Soares, linux-bsp, devicetree, imx, linux-arm-kernel,
linux-kernel, ath12k
On Wed, Nov 18, 2026 at 12:38:37PM +0000, Vitor Soares wrote:
> From: Vitor Soares <vitor.soares@toradex.com>
>
> The Aquila iMX95 has a Silex SX-PCEBE Wi-Fi module (WCN7850). The
> module reports the same PCI and QMI IDs as other WCN7850 designs, and
> its board data also comes in variants for different regulatory domains
> (US/EU/JP, UK/CA low and high). The IDs alone therefore cannot identify
> the right board data.
>
> Describe the Wi-Fi device behind the PCIe1 root port and set
> qcom,calibration-variant to the US/EU/JP board data.
>
> Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-18 18:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-18 12:38 [PATCH] arm64: dts: freescale: imx95-aquila: Add ath12k calibration variant Vitor Soares
2026-11-18 18:31 ` Francesco Dolcini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox