Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 0/2] dmaengine: ma35d1-pdma: Add MA35D1 PDMA driver
@ 2026-11-19  1:54 Shan-Chun Hung
  2026-11-19  1:54 ` [PATCH v3 1/2] dt-bindings: dma: nuvoton,ma35d1-pdma: Document MA35D1 PDMA controller Shan-Chun Hung
  2026-11-19  1:54 ` [PATCH v3 2/2] dmaengine: ma35d1-pdma: Add MA35D1 PDMA driver Shan-Chun Hung
  0 siblings, 2 replies; 3+ messages in thread
From: Shan-Chun Hung @ 2026-11-19  1:54 UTC (permalink / raw)
  To: ychuang3, schung, vkoul, Frank.Li, robh, krzk+dt, conor+dt, kees,
	gustavoars, linux-arm-kernel, dmaengine, devicetree, linux-kernel,
	linux-hardening
  Cc: Shan-Chun Hung

This series adds the PDMA controller driver and DT binding for the
Nuvoton MA35D1 SoC.

The driver supports memory-to-memory, slave scatter-gather and cyclic
transfers.

Tested on the MA35D1 SOM board with Linux v7.4-rc3:
 - memory-to-memory with dmatest (2000 iterations of 1MB buffers, no failures)
 - slave scatter-gather with a local (not yet submitted) QSPI patch
 - cyclic slave with a local (not yet submitted) I2S patch

Changes in v3:
 - Use dma_alloc_coherent() for the hardware SG table instead of
   kzalloc() + dma_map_single(); defer descriptor free in terminate_all().
 - Rename ma35d1_desc_submit() to ma35d1_desc_prep_done(); prep() only
   prepares the descriptor.
 - Rewrite the IRQ handler: read and ack TDSTS/ABTSTS once, then iterate
   the set bits.
 - Address issue identified by Sashiko AI review:
   - Terminate the descriptor with vchan_terminate_vdesc() when a cyclic
     transfer is aborted, avoiding a use-after-free in vchan_complete().
 - Request the IRQ after the DMA device is registered.
 - Use devm_of_dma_controller_register() and
   dmaenginem_async_device_register(), and drop remove(); a devm action
   stops the hardware and kills the tasklets.

Changes in v2:
 - Address issues identified by Sashiko AI review:
   - Program registers on descriptor start instead of prep.
   - Fix interrupt completion handling and return IRQ_NONE when idle.
   - Set PDMA_TBINTDIS on intermediate memcpy chunks.
   - Validate scatter-gather lengths and bus width alignment.
   - Fix channel request assignment in of_xlate().
   - Safe controller teardown order in remove().
   - Drop peripheral timeout support to simplify driver.
 - binding: describe the hardware in the description, and drop
   dma-channels and the dt-bindings header.
 - Use a fixed number of 10 channels and trim the includes.

Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com>

Shan-Chun Hung (2):
  dt-bindings: dma: nuvoton,ma35d1-pdma: Document MA35D1 PDMA controller
  dmaengine: ma35d1-pdma: Add MA35D1 PDMA driver

 .../bindings/dma/nuvoton,ma35d1-pdma.yaml     |  71 ++
 drivers/dma/Kconfig                           |  12 +
 drivers/dma/Makefile                          |   1 +
 drivers/dma/ma35d1-pdma.c                     | 662 ++++++++++++++++++
 4 files changed, 746 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/nuvoton,ma35d1-pdma.yaml
 create mode 100644 drivers/dma/ma35d1-pdma.c

-- 
2.25.1



^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2026-11-19  1:55 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-19  1:54 [PATCH v3 0/2] dmaengine: ma35d1-pdma: Add MA35D1 PDMA driver Shan-Chun Hung
2026-11-19  1:54 ` [PATCH v3 1/2] dt-bindings: dma: nuvoton,ma35d1-pdma: Document MA35D1 PDMA controller Shan-Chun Hung
2026-11-19  1:54 ` [PATCH v3 2/2] dmaengine: ma35d1-pdma: Add MA35D1 PDMA driver Shan-Chun Hung

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox