From: Jonas Karlman <jonas@kwiboo.se>
To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jonas Karlman <jonas@kwiboo.se>
Subject: [PATCH 6/8] ARM: dts: rockchip: Add Luckfox Lyra Ultra board
Date: Thu, 19 Nov 2026 15:20:49 +0000 [thread overview]
Message-ID: <20261119152055.556266-7-jonas@kwiboo.se> (raw)
In-Reply-To: <20261119152055.556266-1-jonas@kwiboo.se>
Luckfox Lyra Ultra is powered by the Rockchip RK3506B SoC, which
integrates three Cortex-A7 cores and one Cortex-M0 core. It includes
512 MB of DDR3 memory, 8 GB of eMMC storage, MIPI DSI, Ethernet, and
IO expansion interfaces.
Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra-Ultra
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
As mentioned in cover letter, unclear if this should use
rockchip,rk3506b instead of rockchip,rk3506.
---
arch/arm/boot/dts/rockchip/Makefile | 3 +-
.../rockchip/rk3506b-luckfox-lyra-ultra.dts | 31 ++++++
.../dts/rockchip/rk3506b-luckfox-lyra.dtsi | 100 ++++++++++++++++++
3 files changed, 133 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts
create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi
diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile
index df620116bb2d..9a699bb8fc5a 100644
--- a/arch/arm/boot/dts/rockchip/Makefile
+++ b/arch/arm/boot/dts/rockchip/Makefile
@@ -47,4 +47,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-veyron-tiger.dtb \
rk3288-vyasa.dtb \
rk3506-luckfox-lyra-plus.dtb \
- rk3506-luckfox-lyra.dtb
+ rk3506-luckfox-lyra.dtb \
+ rk3506b-luckfox-lyra-ultra.dtb
diff --git a/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts
new file mode 100644
index 000000000000..5a3eb35eb70e
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3506b-luckfox-lyra.dtsi"
+
+/ {
+ model = "Luckfox Lyra Ultra";
+ compatible = "luckfox,lyra-ultra", "rockchip,rk3506";
+
+ aliases {
+ ethernet0 = &gmac1;
+ };
+};
+
+&gmac1 {
+ assigned-clocks = <&cru CLK_MAC1>;
+ assigned-clock-rates = <50000000>;
+ phy-handle = <&rmii_phy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_rmii1_miim>, <ð_rmii1_tx_bus2>,
+ <ð_rmii1_rx_bus2>, <ð_rmii1_clk>;
+ clock_in_out = "output";
+ status = "okay";
+};
+
+&mdio1 {
+ rmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi
new file mode 100644
index 000000000000..c422053c1262
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3506.dtsi"
+
+/ {
+ aliases {
+ mmc0 = &sdmmc;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-recovery {
+ label = "Recovery";
+ press-threshold-microvolt = <0>;
+ linux,code = <KEY_VENDOR>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&led1>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: regulator-5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&pinctrl {
+ leds {
+ /omit-if-no-ref/
+ led1: led1 {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ no-sdio;
+ vmmc-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.56.1
next prev parent reply other threads:[~2026-11-19 15:22 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 15:20 [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards Jonas Karlman
2026-11-19 15:20 ` [PATCH 1/8] dt-bindings: soc: rockchip: grf: Add RK3506 compatibles Jonas Karlman
2026-11-19 15:20 ` [PATCH 2/8] ARM: dts: rockchip: Add support for RK3506 Jonas Karlman
2026-11-19 15:20 ` [PATCH 3/8] dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus Jonas Karlman
2026-11-19 15:20 ` [PATCH 4/8] ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards Jonas Karlman
2026-11-19 15:20 ` [PATCH 5/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra Jonas Karlman
2026-11-19 15:20 ` Jonas Karlman [this message]
2026-11-19 15:20 ` [PATCH 7/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W Jonas Karlman
2026-11-19 15:20 ` [PATCH 8/8] ARM: dts: rockchip: Add Luckfox Lyra Zero W board Jonas Karlman
2026-11-20 2:53 ` [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards Chaoyi Chen
2026-11-20 3:02 ` Chaoyi Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119152055.556266-7-jonas@kwiboo.se \
--to=jonas@kwiboo.se \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox