Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
To: Jonas Karlman <jonas@kwiboo.se>, Heiko Stuebner <heiko@sntech.de>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Ye Zhang <ye.zhang@rock-chips.com>,
	devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards
Date: Fri, 20 Nov 2026 10:53:29 +0800	[thread overview]
Message-ID: <f3746e7d-2c56-4e95-bed5-b2e993cf35e0@rock-chips.com> (raw)
In-Reply-To: <20261119152055.556266-1-jonas@kwiboo.se>

Hi Jonas, 

On 11/19/2026 11:20 PM, Jonas Karlman wrote:
> This series adds initial devicetree for Rockchip RK3506 SoC and initial
> support for Luckfox Lyra board family [1].
> 
> The Luckfox Lyra board family use different RK3506 SoC variants, i.e. Lyra
> and Lyra Plus both use RK3506G2 and Lyra Ultra and Lyra Zero W both use the
> RK3506B varaiant.
> 
> All board compatibles use rockchip,rk3506 in this revision of the series,
> maybe we should use rockchip,rk3506b for the RK3506B (and RK3506J) variants?
> 
> The pinctrl driver for RK3506 will not work as-is using the SoC DT from this
> series. The already merged driver depends on a rockchip,ioc1 phandle prop
> that never was described in dt-bindings. The SoC DT in this series instead
> uses rockchip,grf in GPIO controller node to reference correct IOC for GPIO0
> and GPIO1.
> 
> The branch at [2] contains follow-up patches that e.g. fixes pinctrl driver
> and adds USB support.

Perhaps these pinctrl patches should be included before the dts patch?

Cc: Ye Zhang <ye.zhang@rock-chips.com>

> 
> Mainline U-Boot support can be tested using a branch at [3], it contains
> board support using same devicetree files extended with USB support.
> 
> [1] https://wiki.luckfox.com/Luckfox-Lyra
> [2] https://github.com/Kwiboo/linux-rockchip/commits/next-20261116-rk3506
> [3] https://git.u-boot-project.org/u-boot/contributors/kwiboo/u-boot/-/commits/rk3506
> 
> Jonas Karlman (8):
>   dt-bindings: soc: rockchip: grf: Add RK3506 compatibles
>   ARM: dts: rockchip: Add support for RK3506
>   dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus
>   ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards
>   dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra
>   ARM: dts: rockchip: Add Luckfox Lyra Ultra board
>   dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W
>   ARM: dts: rockchip: Add Luckfox Lyra Zero W board
> 
>  .../devicetree/bindings/arm/rockchip.yaml     |   9 +
>  .../devicetree/bindings/soc/rockchip/grf.yaml |   6 +
>  arch/arm/boot/dts/rockchip/Makefile           |   6 +-
>  .../dts/rockchip/rk3506-luckfox-lyra-plus.dts |  31 +
>  .../boot/dts/rockchip/rk3506-luckfox-lyra.dts |   9 +
>  .../dts/rockchip/rk3506-luckfox-lyra.dtsi     | 124 ++++
>  .../arm/boot/dts/rockchip/rk3506-pinctrl.dtsi | 576 ++++++++++++++++++
>  arch/arm/boot/dts/rockchip/rk3506.dtsi        | 540 ++++++++++++++++
>  .../rockchip/rk3506b-luckfox-lyra-ultra.dts   |  31 +
>  .../rockchip/rk3506b-luckfox-lyra-zero-w.dts  |  23 +
>  .../dts/rockchip/rk3506b-luckfox-lyra.dtsi    | 100 +++
>  11 files changed, 1454 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts
>  create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts
>  create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi
>  create mode 100644 arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi
>  create mode 100644 arch/arm/boot/dts/rockchip/rk3506.dtsi
>  create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts
>  create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts
>  create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi
> 

-- 
Best, 
Chaoyi



      parent reply	other threads:[~2026-11-20  2:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-19 15:20 [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards Jonas Karlman
2026-11-19 15:20 ` [PATCH 1/8] dt-bindings: soc: rockchip: grf: Add RK3506 compatibles Jonas Karlman
2026-11-19 15:20 ` [PATCH 2/8] ARM: dts: rockchip: Add support for RK3506 Jonas Karlman
2026-11-19 15:20 ` [PATCH 3/8] dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus Jonas Karlman
2026-11-19 15:20 ` [PATCH 4/8] ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards Jonas Karlman
2026-11-19 15:20 ` [PATCH 5/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra Jonas Karlman
2026-11-19 15:20 ` [PATCH 6/8] ARM: dts: rockchip: Add Luckfox Lyra Ultra board Jonas Karlman
2026-11-19 15:20 ` [PATCH 7/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W Jonas Karlman
2026-11-19 15:20 ` [PATCH 8/8] ARM: dts: rockchip: Add Luckfox Lyra Zero W board Jonas Karlman
2026-11-20  2:53 ` Chaoyi Chen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f3746e7d-2c56-4e95-bed5-b2e993cf35e0@rock-chips.com \
    --to=chaoyi.chen@rock-chips.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=jonas@kwiboo.se \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    --cc=ye.zhang@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox