From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: Ulf Hansson <ulfh@kernel.org>
Cc: michael@amarulasolutions.com, linux-amarula@amarulasolutions.com,
Peng Fan <peng.fan@nxp.com>, Lucas Stach <l.stach@pengutronix.de>,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Fabio Estevam <festevam@gmail.com>, Frank Li <Frank.Li@nxp.com>,
Jacky Bai <ping.bai@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
bui duc phuc <phucduc.bui@gmail.com>,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-pm@vger.kernel.org
Subject: [PATCH v3 2/4] pmdomain: imx: gpcv2: Keep the domains left on by the bootloader
Date: Sun, 22 Nov 2026 16:55:09 +0100 [thread overview]
Message-ID: <20261122155514.10289-3-dario.binacchi@amarulasolutions.com> (raw)
In-Reply-To: <20261122155514.10289-1-dario.binacchi@amarulasolutions.com>
The PGC domains are all registered as off, so a domain left on by the
bootloader, e.g. DISPMIX to show a splash screen, is powered up again
by its first consumer. On the i.MX8MN this turns the display off and
hangs the system.
The GPC does not report the power state of a domain, but the ADB400
bridge acknowledges the power-up handshake only while the domain is
powered. Use it to register as on the domains left on by the
bootloader.
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
Changes in v3:
- Drop the runtime PM reference synchronously in the probe error path
Changes in v2:
- Release the resources of the domains left on when the driver is
removed
drivers/pmdomain/imx/gpcv2.c | 77 +++++++++++++++++++++++++++++++++++-
1 file changed, 75 insertions(+), 2 deletions(-)
diff --git a/drivers/pmdomain/imx/gpcv2.c b/drivers/pmdomain/imx/gpcv2.c
index 6a54ee734514..f8f2d38c1b2a 100644
--- a/drivers/pmdomain/imx/gpcv2.c
+++ b/drivers/pmdomain/imx/gpcv2.c
@@ -292,6 +292,7 @@ struct imx_pgc_domain {
const int voltage;
const bool keep_clocks;
+ bool boot_on; /* Left on by the bootloader */
struct device *dev;
unsigned int pgc_sw_pup_reg;
@@ -488,6 +489,8 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
pm_runtime_put_sync_suspend(domain->dev);
+ domain->boot_on = false;
+
return 0;
out_clk_disable:
@@ -1315,9 +1318,27 @@ static const struct imx_pgc_domain_data imx8mn_pgc_domain_data = {
.pgc_regs = &imx7_pgc_regs,
};
+/*
+ * The GPC does not report the power state of a domain, but the ADB400
+ * acknowledges the power-up handshake only while the domain is powered.
+ */
+static bool imx_pgc_domain_is_on(struct imx_pgc_domain *domain)
+{
+ u32 val;
+
+ if (!domain->bits.hskack)
+ return false;
+
+ if (regmap_read(domain->regmap, domain->regs->hsk, &val))
+ return false;
+
+ return (val & domain->bits.hskack) == domain->bits.hskack;
+}
+
static int imx_pgc_domain_probe(struct platform_device *pdev)
{
struct imx_pgc_domain *domain = pdev->dev.platform_data;
+ bool init_off;
int ret;
domain->dev = &pdev->dev;
@@ -1348,12 +1369,44 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
regmap_update_bits(domain->regmap, domain->regs->map,
domain->bits.map, domain->bits.map);
- ret = pm_genpd_init(&domain->genpd, NULL, true);
+ init_off = !imx_pgc_domain_is_on(domain);
+ ret = pm_genpd_init(&domain->genpd, NULL, init_off);
if (ret) {
dev_err_probe(domain->dev, ret, "Failed to init power domain\n");
goto out_domain_unmap;
}
+ /* Balance the first imx_pgc_power_down() */
+ if (!init_off) {
+ ret = pm_runtime_resume_and_get(domain->dev);
+ if (ret < 0) {
+ dev_err_probe(domain->dev, ret,
+ "Failed to resume domain\n");
+ goto out_genpd_remove;
+ }
+
+ if (!IS_ERR(domain->regulator)) {
+ ret = regulator_enable(domain->regulator);
+ if (ret) {
+ dev_err_probe(domain->dev, ret,
+ "Failed to enable domain's regulator\n");
+ goto out_put_pm;
+ }
+ }
+
+ if (domain->keep_clocks) {
+ ret = clk_bulk_prepare_enable(domain->num_clks,
+ domain->clks);
+ if (ret) {
+ dev_err_probe(domain->dev, ret,
+ "Failed to enable domain's clocks\n");
+ goto out_regulator_disable;
+ }
+ }
+
+ domain->boot_on = true;
+ }
+
if (IS_ENABLED(CONFIG_LOCKDEP) &&
of_property_present(domain->dev->of_node, "power-domains"))
lockdep_set_subclass(&domain->genpd.mlock, 1);
@@ -1362,11 +1415,20 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
&domain->genpd);
if (ret) {
dev_err_probe(domain->dev, ret, "Failed to add genpd provider\n");
- goto out_genpd_remove;
+ goto out_clk_disable;
}
return 0;
+out_clk_disable:
+ if (!init_off && domain->keep_clocks)
+ clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+out_regulator_disable:
+ if (!init_off && !IS_ERR(domain->regulator))
+ regulator_disable(domain->regulator);
+out_put_pm:
+ if (!init_off)
+ pm_runtime_put_sync(domain->dev);
out_genpd_remove:
pm_genpd_remove(&domain->genpd);
out_domain_unmap:
@@ -1385,6 +1447,17 @@ static void imx_pgc_domain_remove(struct platform_device *pdev)
of_genpd_del_provider(domain->dev->of_node);
pm_genpd_remove(&domain->genpd);
+ if (domain->boot_on) {
+ if (domain->keep_clocks)
+ clk_bulk_disable_unprepare(domain->num_clks,
+ domain->clks);
+
+ if (!IS_ERR(domain->regulator))
+ regulator_disable(domain->regulator);
+
+ pm_runtime_put_sync(domain->dev);
+ }
+
if (domain->bits.map)
regmap_update_bits(domain->regmap, domain->regs->map,
domain->bits.map, 0);
--
2.43.0
next prev parent reply other threads:[~2026-11-22 15:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 15:55 [PATCH v3 0/4] pmdomain: imx: Keep the domains left on by the bootloader Dario Binacchi
2026-11-22 15:55 ` [PATCH v3 1/4] pmdomain: imx8m-blk-ctrl: Remove the power notifier on probe failure Dario Binacchi
2026-11-22 15:55 ` Dario Binacchi [this message]
2026-11-22 15:55 ` [PATCH v3 3/4] pmdomain: imx8m-blk-ctrl: Keep the domains left on by the bootloader Dario Binacchi
2026-11-22 15:55 ` [PATCH v3 4/4] pmdomain: imx8m-blk-ctrl: Hold boot-on domain clocks until sync_state Dario Binacchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122155514.10289-3-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=Frank.Li@nxp.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=michael@amarulasolutions.com \
--cc=peng.fan@nxp.com \
--cc=phucduc.bui@gmail.com \
--cc=ping.bai@nxp.com \
--cc=rafael.j.wysocki@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox