From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: Ulf Hansson <ulfh@kernel.org>
Cc: michael@amarulasolutions.com, linux-amarula@amarulasolutions.com,
Peng Fan <peng.fan@nxp.com>, Lucas Stach <l.stach@pengutronix.de>,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Fabio Estevam <festevam@gmail.com>, Frank Li <Frank.Li@nxp.com>,
Kees Cook <kees+treewide@kernel.org>,
Ming Qian <ming.qian@oss.nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Sascha Hauer <s.hauer@pengutronix.de>,
Xu Yang <xu.yang_2@nxp.com>, bui duc phuc <phucduc.bui@gmail.com>,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-pm@vger.kernel.org
Subject: [PATCH v3 4/4] pmdomain: imx8m-blk-ctrl: Hold boot-on domain clocks until sync_state
Date: Sun, 22 Nov 2026 16:55:11 +0100 [thread overview]
Message-ID: <20261122155514.10289-5-dario.binacchi@amarulasolutions.com> (raw)
In-Reply-To: <20261122155514.10289-1-dario.binacchi@amarulasolutions.com>
The clocks of a domain left on by the bootloader have no user until
its consumers probe, so they are gated when the unused clocks are
disabled. On the i.MX8MN, with the LCDIF driver built as a module,
this stops the pixel clock of the U-Boot splash screen long before
the DRM driver probes.
Keep the clocks of these domains enabled until sync_state, i.e. until
all the consumers of the blk-ctrl have probed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
(no changes since v2)
Changes in v2:
- Rebase on the changes of the previous patch
drivers/pmdomain/imx/imx8m-blk-ctrl.c | 32 +++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/pmdomain/imx/imx8m-blk-ctrl.c b/drivers/pmdomain/imx/imx8m-blk-ctrl.c
index 99d75bfb69e9..e360cb038969 100644
--- a/drivers/pmdomain/imx/imx8m-blk-ctrl.c
+++ b/drivers/pmdomain/imx/imx8m-blk-ctrl.c
@@ -84,6 +84,7 @@ struct imx8m_blk_ctrl_domain {
struct imx8m_blk_ctrl *bc;
int num_paths;
bool boot_on; /* Left on by the bootloader */
+ bool boot_clks_held; /* Until sync_state */
};
struct imx8m_blk_ctrl_data {
@@ -246,13 +247,31 @@ static int imx8m_blk_ctrl_get_boot_on(struct imx8m_blk_ctrl_domain *domain)
if (icc_bulk_set_bw(domain->num_paths, domain->paths))
dev_err(bc->dev, "failed to set icc bw\n");
+ /* Nobody else holds the clocks until the consumers probe */
+ if (clk_bulk_prepare_enable(domain->data->num_clks, domain->clks))
+ dev_warn(bc->dev, "failed to enable clocks of \"%s\"\n",
+ domain->data->name);
+ else
+ domain->boot_clks_held = true;
+
domain->boot_on = true;
return 0;
}
+static void imx8m_blk_ctrl_put_boot_clks(struct imx8m_blk_ctrl_domain *domain)
+{
+ if (!domain->boot_clks_held)
+ return;
+
+ clk_bulk_disable_unprepare(domain->data->num_clks, domain->clks);
+ domain->boot_clks_held = false;
+}
+
static void imx8m_blk_ctrl_put_boot_on(struct imx8m_blk_ctrl_domain *domain)
{
+ imx8m_blk_ctrl_put_boot_clks(domain);
+
if (!domain->boot_on)
return;
@@ -1059,11 +1078,24 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
};
MODULE_DEVICE_TABLE(of, imx8m_blk_ctrl_of_match);
+static void imx8m_blk_ctrl_sync_state(struct device *dev)
+{
+ struct imx8m_blk_ctrl *bc = dev_get_drvdata(dev);
+ int i;
+
+ /* This replaces the genpd provider sync_state */
+ of_genpd_sync_state(dev->of_node);
+
+ for (i = 0; i < bc->onecell_data.num_domains; i++)
+ imx8m_blk_ctrl_put_boot_clks(&bc->domains[i]);
+}
+
static struct platform_driver imx8m_blk_ctrl_driver = {
.probe = imx8m_blk_ctrl_probe,
.remove = imx8m_blk_ctrl_remove,
.driver = {
.name = "imx8m-blk-ctrl",
+ .sync_state = imx8m_blk_ctrl_sync_state,
.pm = &imx8m_blk_ctrl_pm_ops,
.of_match_table = imx8m_blk_ctrl_of_match,
.suppress_bind_attrs = true,
--
2.43.0
prev parent reply other threads:[~2026-11-22 15:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 15:55 [PATCH v3 0/4] pmdomain: imx: Keep the domains left on by the bootloader Dario Binacchi
2026-11-22 15:55 ` [PATCH v3 1/4] pmdomain: imx8m-blk-ctrl: Remove the power notifier on probe failure Dario Binacchi
2026-11-22 15:55 ` [PATCH v3 2/4] pmdomain: imx: gpcv2: Keep the domains left on by the bootloader Dario Binacchi
2026-11-22 15:55 ` [PATCH v3 3/4] pmdomain: imx8m-blk-ctrl: " Dario Binacchi
2026-11-22 15:55 ` Dario Binacchi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122155514.10289-5-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=Frank.Li@nxp.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kees+treewide@kernel.org \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=michael@amarulasolutions.com \
--cc=ming.qian@oss.nxp.com \
--cc=peng.fan@nxp.com \
--cc=phucduc.bui@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=ulfh@kernel.org \
--cc=xu.yang_2@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox