From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Marek Vasut <marex@denx.de>
Cc: linux-arm-kernel@lists.infradead.org, Marek Vasut <marex@denx.de>,
Adam Ford <aford173@gmail.com>,
Fabio Estevam <festevam@gmail.com>,
Joakim Zhang <qiangqing.zhang@nxp.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Lucas Stach <l.stach@pengutronix.de>,
Markus Niebel <Markus.Niebel@ew.tq-group.com>,
NXP Linux Team <linux-imx@nxp.com>,
Paul Elder <paul.elder@ideasonboard.com>,
Peng Fan <peng.fan@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Richard Zhu <hongxing.zhu@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Tim Harvey <tharvey@gateworks.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH 1/3] arm64: dts: imx8mq: Swap SAI DMA order
Date: Fri, 04 Nov 2022 08:13:22 +0100 [thread overview]
Message-ID: <2105362.yKVeVyVuyW@steina-w> (raw)
In-Reply-To: <20221103181920.95736-1-marex@denx.de>
Hi Marek,
thanks for this patch.
Am Donnerstag, 3. November 2022, 19:19:18 CET schrieb Marek Vasut:
> Swap the SAI dmas and dma-names to match the order documented in
> Documentation/devicetree/bindings/sound/fsl-sai.txt
This file has been converted to Documentation/devicetree/bindings/sound/
fsl,sai.yaml in commit d563336877b2 ("ASoC: dt-bindings: fsl,sai: Convert
format to json-schema"). In next since next-20220816.
In this schema the DMA order 'tx', 'rx' is only for fsl,vf610-sai, all other
compatibles use 'rx', 'tx'. So this swap is not needed anymore.
Same is for imx8mm and imx8mn.
This change should have been made before schema conversion, so they would have
been identical on all compatibles...
Best regards,
Alexander
> using the following regex:
>
> "
> s@\(dma[^=]\+= \)\([^,]\+\), \([^;]\+\);@\1\3, \2;
> "
>
> No functional change.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Adam Ford <aford173@gmail.com>
> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Markus Niebel <Markus.Niebel@ew.tq-group.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Paul Elder <paul.elder@ideasonboard.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Tim Harvey <tharvey@gateworks.com>
> Cc: devicetree@vger.kernel.org
> To: linux-arm-kernel@lists.infradead.org
> ---
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index
> c47e2d7235d3e..f00b040ca03e9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -345,8 +345,8 @@ sai1: sai@30010000 {
> <&clk IMX8MQ_CLK_SAI1_ROOT>,
> <&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_CLK_DUMMY>;
> clock-names = "bus", "mclk1", "mclk2",
"mclk3";
> - dmas = <&sdma2 8 24 0>, <&sdma1 9 24
0>;
> - dma-names = "rx", "tx";
> + dmas = <&sdma1 9 24 0>, <&sdma2 8 24
0>;
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -359,8 +359,8 @@ sai6: sai@30030000 {
> <&clk IMX8MQ_CLK_SAI6_ROOT>,
> <&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_CLK_DUMMY>;
> clock-names = "bus", "mclk1", "mclk2",
"mclk3";
> - dmas = <&sdma2 4 24 0>, <&sdma2 5 24
0>;
> - dma-names = "rx", "tx";
> + dmas = <&sdma2 5 24 0>, <&sdma2 4 24
0>;
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -373,8 +373,8 @@ sai5: sai@30040000 {
> <&clk IMX8MQ_CLK_SAI5_ROOT>,
> <&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_CLK_DUMMY>;
> clock-names = "bus", "mclk1", "mclk2",
"mclk3";
> - dmas = <&sdma2 2 24 0>, <&sdma2 3 24
0>;
> - dma-names = "rx", "tx";
> + dmas = <&sdma2 3 24 0>, <&sdma2 2 24
0>;
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -387,8 +387,8 @@ sai4: sai@30050000 {
> <&clk IMX8MQ_CLK_SAI4_ROOT>,
> <&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_CLK_DUMMY>;
> clock-names = "bus", "mclk1", "mclk2",
"mclk3";
> - dmas = <&sdma2 0 24 0>, <&sdma2 1 24
0>;
> - dma-names = "rx", "tx";
> + dmas = <&sdma2 1 24 0>, <&sdma2 0 24
0>;
> + dma-names = "tx", "rx";
> status = "disabled";
> };
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2022-11-04 7:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-03 18:19 [PATCH 1/3] arm64: dts: imx8mq: Swap SAI DMA order Marek Vasut
2022-11-03 18:19 ` [PATCH 2/3] arm64: dts: imx8mm: " Marek Vasut
2022-11-03 18:19 ` [PATCH 3/3] arm64: dts: imx8mn: " Marek Vasut
2022-11-04 7:13 ` Alexander Stein [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2105362.yKVeVyVuyW@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=Markus.Niebel@ew.tq-group.com \
--cc=aford173@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=l.stach@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=marex@denx.de \
--cc=paul.elder@ideasonboard.com \
--cc=peng.fan@nxp.com \
--cc=qiangqing.zhang@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox