[PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420

[b.zolnierkie@samsung.com (Bartlomiej Zolnierkiewicz)]

Hi,

On Monday, December 16, 2013 05:31:10 PM Abhilash Kesavan wrote:
> Add PMU configuration table for various low power modes - AFTR/LPA/SLEEP.
> Also, add core s2r support for Exynos5420.
> 
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> ---
> This patch depends on "ARM: EXYNOS5: Add PMU settings for exynos5420"
> http://www.spinics.net/lists/linux-samsung-soc/msg24902.html

[...]

> @@ -253,10 +316,20 @@ static int exynos_pm_suspend(void)
>  
>  	/* Setting SEQ_OPTION register */
>  
> -	tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
> -	__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
> +	if (soc_is_exynos5420()) {
> +		cluster_id = (read_cpuid(CPUID_MPIDR) >> 8) & 0xf;
> +		if (!cluster_id)
> +			__raw_writel(EXYNOS5420_ARM_USE_STANDBY_WFI0,
> +				     S5P_CENTRAL_SEQ_OPTION);
> +		else
> +			__raw_writel(EXYNOS5420_KFC_USE_STANDBY_WFI0,
> +				     S5P_CENTRAL_SEQ_OPTION);
> +	} else if (soc_is_exynos5250()) {

Adding a check here for EXYNOS5250 doesn't look correct
(the old code behavior for older EXYNOYS SoCs should be
preserved).

> +		tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
> +		__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
> +	}

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics