* [PATCH 1/3] arm64: dts: allwinner: h6: tanix-tx6: enable emmc @ 2020-01-15 19:34 Jernej Skrabec 2020-01-16 12:27 ` Maxime Ripard 2020-01-17 18:14 ` Maxime Ripard 0 siblings, 2 replies; 6+ messages in thread From: Jernej Skrabec @ 2020-01-15 19:34 UTC (permalink / raw) To: mripard, wens Cc: mark.rutland, devicetree, robh+dt, linux-kernel, linux-arm-kernel Tanix TX6 has 32 GiB eMMC. Add a node for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> --- .../dts/allwinner/sun50i-h6-tanix-tx6.dts | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index 83e6cb0e59ce..8cbf4e4a761e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -31,6 +31,13 @@ hdmi_con_in: endpoint { }; }; + reg_vcc1v8: vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_vcc3v3: vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; @@ -78,6 +85,15 @@ &mmc0 { status = "okay"; }; +&mmc2 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + non-removable; + cap-mmc-hw-reset; + bus-width = <8>; + status = "okay"; +}; + &ohci0 { status = "okay"; }; @@ -86,6 +102,10 @@ &ohci3 { status = "okay"; }; +&pio { + vcc-pc-supply = <®_vcc1v8>; +}; + &r_ir { linux,rc-map-name = "rc-tanix-tx5max"; status = "okay"; -- 2.24.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] arm64: dts: allwinner: h6: tanix-tx6: enable emmc 2020-01-15 19:34 [PATCH 1/3] arm64: dts: allwinner: h6: tanix-tx6: enable emmc Jernej Skrabec @ 2020-01-16 12:27 ` Maxime Ripard 2020-01-16 16:29 ` Jernej Škrabec 2020-01-17 18:14 ` Maxime Ripard 1 sibling, 1 reply; 6+ messages in thread From: Maxime Ripard @ 2020-01-16 12:27 UTC (permalink / raw) To: Jernej Skrabec Cc: mark.rutland, devicetree, linux-kernel, wens, robh+dt, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 239 bytes --] Hi Jernej, On Wed, Jan 15, 2020 at 08:34:41PM +0100, Jernej Skrabec wrote: > Tanix TX6 has 32 GiB eMMC. Add a node for it. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Did you forget to send the other two patches? Maxime [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] arm64: dts: allwinner: h6: tanix-tx6: enable emmc 2020-01-16 12:27 ` Maxime Ripard @ 2020-01-16 16:29 ` Jernej Škrabec 0 siblings, 0 replies; 6+ messages in thread From: Jernej Škrabec @ 2020-01-16 16:29 UTC (permalink / raw) To: Maxime Ripard Cc: mark.rutland, devicetree, linux-kernel, wens, robh+dt, linux-arm-kernel Hi! Dne četrtek, 16. januar 2020 ob 13:27:00 CET je Maxime Ripard napisal(a): > Hi Jernej, > > On Wed, Jan 15, 2020 at 08:34:41PM +0100, Jernej Skrabec wrote: > > Tanix TX6 has 32 GiB eMMC. Add a node for it. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > Did you forget to send the other two patches? There are none. This is just mistake with "git format-patch -3". This patch was tested separately and it works. Best regards, Jernej _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] arm64: dts: allwinner: h6: tanix-tx6: enable emmc 2020-01-15 19:34 [PATCH 1/3] arm64: dts: allwinner: h6: tanix-tx6: enable emmc Jernej Skrabec 2020-01-16 12:27 ` Maxime Ripard @ 2020-01-17 18:14 ` Maxime Ripard 2020-01-17 18:18 ` Jernej Škrabec 1 sibling, 1 reply; 6+ messages in thread From: Maxime Ripard @ 2020-01-17 18:14 UTC (permalink / raw) To: Jernej Skrabec Cc: mark.rutland, devicetree, linux-kernel, wens, robh+dt, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 1426 bytes --] On Wed, Jan 15, 2020 at 08:34:41PM +0100, Jernej Skrabec wrote: > Tanix TX6 has 32 GiB eMMC. Add a node for it. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > --- > .../dts/allwinner/sun50i-h6-tanix-tx6.dts | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts > index 83e6cb0e59ce..8cbf4e4a761e 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts > @@ -31,6 +31,13 @@ hdmi_con_in: endpoint { > }; > }; > > + reg_vcc1v8: vcc1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > reg_vcc3v3: vcc3v3 { > compatible = "regulator-fixed"; > regulator-name = "vcc3v3"; > @@ -78,6 +85,15 @@ &mmc0 { > status = "okay"; > }; > > +&mmc2 { > + vmmc-supply = <®_vcc3v3>; > + vqmmc-supply = <®_vcc1v8>; > + non-removable; > + cap-mmc-hw-reset; > + bus-width = <8>; > + status = "okay"; > +}; > + > &ohci0 { > status = "okay"; > }; > @@ -86,6 +102,10 @@ &ohci3 { > status = "okay"; > }; > > +&pio { > + vcc-pc-supply = <®_vcc1v8>; > +}; > + Can you list all of the regulators for the H6 while you're at it (in a preliminary patch, ideally)? Thanks! Maxime [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] arm64: dts: allwinner: h6: tanix-tx6: enable emmc 2020-01-17 18:14 ` Maxime Ripard @ 2020-01-17 18:18 ` Jernej Škrabec 2020-01-22 17:42 ` Maxime Ripard 0 siblings, 1 reply; 6+ messages in thread From: Jernej Škrabec @ 2020-01-17 18:18 UTC (permalink / raw) To: Maxime Ripard Cc: mark.rutland, devicetree, linux-kernel, wens, robh+dt, linux-arm-kernel Dne petek, 17. januar 2020 ob 19:14:27 CET je Maxime Ripard napisal(a): > On Wed, Jan 15, 2020 at 08:34:41PM +0100, Jernej Skrabec wrote: > > Tanix TX6 has 32 GiB eMMC. Add a node for it. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > --- > > > > .../dts/allwinner/sun50i-h6-tanix-tx6.dts | 20 +++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts > > b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index > > 83e6cb0e59ce..8cbf4e4a761e 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts > > @@ -31,6 +31,13 @@ hdmi_con_in: endpoint { > > > > }; > > > > }; > > > > + reg_vcc1v8: vcc1v8 { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc1v8"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + }; > > + > > > > reg_vcc3v3: vcc3v3 { > > > > compatible = "regulator-fixed"; > > regulator-name = "vcc3v3"; > > > > @@ -78,6 +85,15 @@ &mmc0 { > > > > status = "okay"; > > > > }; > > > > +&mmc2 { > > + vmmc-supply = <®_vcc3v3>; > > + vqmmc-supply = <®_vcc1v8>; > > + non-removable; > > + cap-mmc-hw-reset; > > + bus-width = <8>; > > + status = "okay"; > > +}; > > + > > > > &ohci0 { > > > > status = "okay"; > > > > }; > > > > @@ -86,6 +102,10 @@ &ohci3 { > > > > status = "okay"; > > > > }; > > > > +&pio { > > + vcc-pc-supply = <®_vcc1v8>; > > +}; > > + > > Can you list all of the regulators for the H6 while you're at it (in a > preliminary patch, ideally)? Not sure what you mean. This box has only fixed regulators. I deducted above from the fact that port C is mostly dedicated to eMMC, so it has to use same regulator as vqmmc. Other than that, I don't know. Best regards, Jernej _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] arm64: dts: allwinner: h6: tanix-tx6: enable emmc 2020-01-17 18:18 ` Jernej Škrabec @ 2020-01-22 17:42 ` Maxime Ripard 0 siblings, 0 replies; 6+ messages in thread From: Maxime Ripard @ 2020-01-22 17:42 UTC (permalink / raw) To: Jernej Škrabec Cc: mark.rutland, devicetree, linux-kernel, wens, robh+dt, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 2270 bytes --] Hi, On Fri, Jan 17, 2020 at 07:18:58PM +0100, Jernej Škrabec wrote: > Dne petek, 17. januar 2020 ob 19:14:27 CET je Maxime Ripard napisal(a): > > On Wed, Jan 15, 2020 at 08:34:41PM +0100, Jernej Skrabec wrote: > > > Tanix TX6 has 32 GiB eMMC. Add a node for it. > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > > --- > > > > > > .../dts/allwinner/sun50i-h6-tanix-tx6.dts | 20 +++++++++++++++++++ > > > 1 file changed, 20 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts > > > b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index > > > 83e6cb0e59ce..8cbf4e4a761e 100644 > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts > > > @@ -31,6 +31,13 @@ hdmi_con_in: endpoint { > > > > > > }; > > > > > > }; > > > > > > + reg_vcc1v8: vcc1v8 { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "vcc1v8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + }; > > > + > > > > > > reg_vcc3v3: vcc3v3 { > > > > > > compatible = "regulator-fixed"; > > > regulator-name = "vcc3v3"; > > > > > > @@ -78,6 +85,15 @@ &mmc0 { > > > > > > status = "okay"; > > > > > > }; > > > > > > +&mmc2 { > > > + vmmc-supply = <®_vcc3v3>; > > > + vqmmc-supply = <®_vcc1v8>; > > > + non-removable; > > > + cap-mmc-hw-reset; > > > + bus-width = <8>; > > > + status = "okay"; > > > +}; > > > + > > > > > > &ohci0 { > > > > > > status = "okay"; > > > > > > }; > > > > > > @@ -86,6 +102,10 @@ &ohci3 { > > > > > > status = "okay"; > > > > > > }; > > > > > > +&pio { > > > + vcc-pc-supply = <®_vcc1v8>; > > > +}; > > > + > > > > Can you list all of the regulators for the H6 while you're at it (in a > > preliminary patch, ideally)? > > Not sure what you mean. This box has only fixed regulators. I deducted above > from the fact that port C is mostly dedicated to eMMC, so it has to use same > regulator as vqmmc. Other than that, I don't know. If you don't really know, then setting all of them to 3.3v makes the most sense. It should be described anyway. Maxime [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-01-22 17:42 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-01-15 19:34 [PATCH 1/3] arm64: dts: allwinner: h6: tanix-tx6: enable emmc Jernej Skrabec 2020-01-16 12:27 ` Maxime Ripard 2020-01-16 16:29 ` Jernej Škrabec 2020-01-17 18:14 ` Maxime Ripard 2020-01-17 18:18 ` Jernej Škrabec 2020-01-22 17:42 ` Maxime Ripard
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox