From: Shawn Lin <shawn.lin@rock-chips.com>
To: "Sebastian Reichel" <sebastian.reichel@collabora.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Heiko Stuebner" <heiko@sntech.de>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Jingoo Han" <jingoohan1@gmail.com>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Yury Norov (NVIDIA)" <yury.norov@gmail.com>,
"Nicolas Frattaroli" <nicolas.frattaroli@collabora.com>
Cc: shawn.lin@rock-chips.com, Alexey Charkov <alchark@flipper.net>,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
kernel@collabora.com
Subject: Re: [PATCH v6 02/10] PCI: dw-rockchip: Restore vpcie3v3 regulator handle
Date: Wed, 9 Sep 2026 08:44:45 +0800 [thread overview]
Message-ID: <4d441232-6ab5-4865-a70c-f868e8128f7e@rock-chips.com> (raw)
In-Reply-To: <20260908-rockchip-pcie-system-suspend-v6-2-fbabcca9921b@collabora.com>
在 2026/09/08 星期二 22:51, Sebastian Reichel 写道:
> This reverts commit c930b10f17c0 ("PCI: dw-rockchip: Simplify regulator
> setup with devm_regulator_get_enable_optional()"), which nicely cleaned
> up the code.
>
> The vpcie3v3 regulator handle is needed to disable the regulator during
> system suspend (to be added in its own patch).
>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
> drivers/pci/controller/dwc/pcie-dw-rockchip.c | 23 +++++++++++++++++------
> 1 file changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> index dc85564e5001..f67ad3c31c35 100644
> --- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> +++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> @@ -112,6 +112,7 @@ struct rockchip_pcie {
> unsigned int clk_cnt;
> struct reset_control *rst;
> struct gpio_desc *rst_gpio;
> + struct regulator *vpcie3v3;
> struct irq_domain *irq_domain;
> const struct rockchip_pcie_of_data *data;
> bool supports_clkreq;
> @@ -844,15 +845,22 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
> return ret;
>
> /* DON'T MOVE ME: must be enable before PHY init */
> - ret = devm_regulator_get_enable_optional(dev, "vpcie3v3");
> - if (ret < 0 && ret != -ENODEV)
> - return dev_err_probe(dev, ret,
> - "failed to enable vpcie3v3 regulator\n");
> + rockchip->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3");
> + if (IS_ERR(rockchip->vpcie3v3)) {
> + if (PTR_ERR(rockchip->vpcie3v3) != -ENODEV)
> + return dev_err_probe(dev, PTR_ERR(rockchip->vpcie3v3),
> + "failed to get vpcie3v3 regulator\n");
> + rockchip->vpcie3v3 = NULL;
> + } else {
> + ret = regulator_enable(rockchip->vpcie3v3);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to enable vpcie3v3 regulator\n");
> + }
>
> ret = rockchip_pcie_phy_init(rockchip);
> if (ret)
> - return dev_err_probe(dev, ret,
> - "failed to initialize the phy\n");
> + goto disable_regulator;
>
> ret = reset_control_deassert(rockchip->rst);
> if (ret)
> @@ -885,6 +893,9 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
> clk_bulk_disable_unprepare(rockchip->clk_cnt, rockchip->clks);
> deinit_phy:
> rockchip_pcie_phy_deinit(rockchip);
> +disable_regulator:
> + if (rockchip->vpcie3v3)
> + regulator_disable(rockchip->vpcie3v3);
>
> return ret;
> }
>
next prev parent reply other threads:[~2026-09-09 0:45 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-08 14:51 [PATCH v6 00/10] PCI: dw-rockchip: add system suspend support Sebastian Reichel
2026-09-08 14:51 ` [PATCH v6 01/10] PCI: dw-rockchip: Fix LTSSM set functions Sebastian Reichel
2026-09-09 0:37 ` Shawn Lin
2026-09-08 14:51 ` [PATCH v6 02/10] PCI: dw-rockchip: Restore vpcie3v3 regulator handle Sebastian Reichel
2026-09-09 0:44 ` Shawn Lin [this message]
2026-09-08 14:51 ` [PATCH v6 03/10] PCI: dw-rockchip: Move devm_phy_get out of phy_init Sebastian Reichel
2026-09-09 0:54 ` Shawn Lin
2026-09-08 14:51 ` [PATCH v6 04/10] PCI: dw-rockchip: Add helper function for enhanced LTSSM control mode Sebastian Reichel
2026-09-09 0:56 ` Shawn Lin
2026-09-08 14:51 ` [PATCH v6 05/10] PCI: dw-rockchip: Add helper function for controller mode Sebastian Reichel
2026-09-09 0:58 ` Shawn Lin
2026-09-08 14:51 ` [PATCH v6 06/10] PCI: dw-rockchip: Add helper function for DDL indicator Sebastian Reichel
2026-09-09 0:58 ` Shawn Lin
2026-09-08 14:51 ` [PATCH v6 07/10] PCI: dw-rockchip: Add pme_turn_off support Sebastian Reichel
2026-09-09 1:07 ` Shawn Lin
2026-09-08 14:51 ` [PATCH v6 08/10] PCI: dw-rockchip: Set broken L1SS resume flag Sebastian Reichel
2026-09-09 1:11 ` Shawn Lin
2026-09-08 14:51 ` [PATCH v6 09/10] PCI: dw-rockchip: Add system PM support Sebastian Reichel
2026-09-08 14:51 ` [PATCH v6 10/10] PCI: dw-rockchip: Clear debug buffer before entering L2 Sebastian Reichel
2026-09-09 1:14 ` Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4d441232-6ab5-4865-a70c-f868e8128f7e@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=alchark@flipper.net \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=heiko@sntech.de \
--cc=jingoohan1@gmail.com \
--cc=kernel@collabora.com \
--cc=kwilczynski@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=nicolas.frattaroli@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=yury.norov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox