[PATCH v6 03/10] PCI: dw-rockchip: Move devm_phy_get out of phy_init

[Sebastian Reichel <sebastian.reichel@collabora.com>]

By moving devm_phy_get() to the probe routine, rockchip_pcie_phy_init()
can be used to re-initialize the PCIe PHY, which is for example needed
after a system suspend/resume cycle.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/pci/controller/dwc/pcie-dw-rockchip.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
index f67ad3c31c35..7472ec78b473 100644
--- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -612,14 +612,8 @@ static int rockchip_pcie_resource_get(struct platform_device *pdev,
 
 static int rockchip_pcie_phy_init(struct rockchip_pcie *rockchip)
 {
-	struct device *dev = rockchip->pci.dev;
 	int ret;
 
-	rockchip->phy = devm_phy_get(dev, "pcie-phy");
-	if (IS_ERR(rockchip->phy))
-		return dev_err_probe(dev, PTR_ERR(rockchip->phy),
-				     "missing PHY\n");
-
 	ret = phy_init(rockchip->phy);
 	if (ret < 0)
 		return ret;
@@ -858,6 +852,13 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
 					     "failed to enable vpcie3v3 regulator\n");
 	}
 
+	rockchip->phy = devm_phy_get(dev, "pcie-phy");
+	if (IS_ERR(rockchip->phy)) {
+		ret = PTR_ERR(rockchip->phy);
+		dev_err_probe(dev, ret, "missing PHY\n");
+		goto disable_regulator;
+	}
+
 	ret = rockchip_pcie_phy_init(rockchip);
 	if (ret)
 		goto disable_regulator;

-- 
2.53.0