Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH RESEND v6 1/2] arm64: dts: Add the arasan sdhci nodes in apm-storm.dtsi
       [not found] ` <1431333531-30491-2-git-send-email-stripathi@apm.com>
@ 2015-05-12  5:33   ` Suman Tripathi
  2015-05-12  7:28     ` Arnd Bergmann
  0 siblings, 1 reply; 3+ messages in thread
From: Suman Tripathi @ 2015-05-12  5:33 UTC (permalink / raw)
  To: linux-arm-kernel

Hi ,

On Mon, May 11, 2015 at 2:08 PM, Suman Tripathi <stripathi@apm.com> wrote:
> This patch adds the arasan sdhci nodes to reuse the of-arasan
> driver for APM X-Gene SoC.
>
> Signed-off-by: Suman Tripathi <stripathi@apm.com>
> ---
>  arch/arm64/boot/dts/apm/apm-mustang.dts |  4 +++
>  arch/arm64/boot/dts/apm/apm-storm.dtsi  | 43 +++++++++++++++++++++++++++++++++
>  2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
> index 83578e7..7ccd517 100644
> --- a/arch/arm64/boot/dts/apm/apm-mustang.dts
> +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
> @@ -52,3 +52,7 @@
>  &xgenet {
>         status = "ok";
>  };
> +
> +&sdhci0 {
> +       status = "ok";
> +};
> diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
> index c8d3e0e..b5d2698 100644
> --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
> +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
> @@ -145,6 +145,40 @@
>                                 clock-output-names = "socplldiv2";
>                         };
>
> +                       ahbclk: ahbclk at 1f2ac000 {
> +                               compatible = "apm,xgene-device-clock";
> +                               #clock-cells = <1>;
> +                               clocks = <&socplldiv2 0>;
> +                               reg = <0x0 0x1f2ac000 0x0 0x1000
> +                                       0x0 0x17000000 0x0 0x2000>;
> +                               reg-names = "csr-reg", "div-reg";
> +                               csr-offset = <0x0>;
> +                               csr-mask = <0x1>;
> +                               enable-offset = <0x8>;
> +                               enable-mask = <0x1>;
> +                               divider-offset = <0x164>;
> +                               divider-width = <0x5>;
> +                               divider-shift = <0x0>;
> +                               clock-output-names = "ahbclk";
> +                       };
> +
> +                       sdioclk: sdioclk at 1f2ac000 {
> +                               compatible = "apm,xgene-device-clock";
> +                               #clock-cells = <1>;
> +                               clocks = <&socplldiv2 0>;
> +                               reg = <0x0 0x1f2ac000 0x0 0x1000
> +                                       0x0 0x17000000 0x0 0x2000>;
> +                               reg-names = "csr-reg", "div-reg";
> +                               csr-offset = <0x0>;
> +                               csr-mask = <0x2>;
> +                               enable-offset = <0x8>;
> +                               enable-mask = <0x2>;
> +                               divider-offset = <0x178>;
> +                               divider-width = <0x8>;
> +                               divider-shift = <0x0>;
> +                               clock-output-names = "sdioclk";
> +                       };
> +
>                         qmlclk: qmlclk {
>                                 compatible = "apm,xgene-device-clock";
>                                 #clock-cells = <1>;
> @@ -533,6 +567,15 @@
>                         interrupts = <0x0 0x4f 0x4>;
>                 };
>
> +               sdhci0: sdhci at 1c000000 {
> +                       compatible = "arasan,sdhci-4.9a";
> +                       reg = <0x0 0x1c000000 0x0 0x100>;
> +                       interrupts = <0x0 0x49 0x4>;
> +                       dma-coherent;
> +                       clock-names = "clk_xin", "clk_ahb";
> +                       clocks = <&sdioclk 0>, <&ahbclk 0>;
> +               };
> +
>                 phy1: phy at 1f21a000 {
>                         compatible = "apm,xgene-phy";
>                         reg = <0x0 0x1f21a000 0x0 0x100>;
> --
> 1.8.2.1
>

Can anyone from dt community review this patch ? I have changed the dts node
names from sdhc to sdhci as per Arnd, Michael comments .

-- 
Thanks,
with regards,
Suman Tripathi

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH RESEND v6 1/2] arm64: dts: Add the arasan sdhci nodes in apm-storm.dtsi
  2015-05-12  5:33   ` [PATCH RESEND v6 1/2] arm64: dts: Add the arasan sdhci nodes in apm-storm.dtsi Suman Tripathi
@ 2015-05-12  7:28     ` Arnd Bergmann
  2015-05-12 12:30       ` Ulf Hansson
  0 siblings, 1 reply; 3+ messages in thread
From: Arnd Bergmann @ 2015-05-12  7:28 UTC (permalink / raw)
  To: linux-arm-kernel

On Tuesday 12 May 2015 11:03:46 Suman Tripathi wrote:
> > @@ -533,6 +567,15 @@
> >                         interrupts = <0x0 0x4f 0x4>;
> >                 };
> >
> > +               sdhci0: sdhci at 1c000000 {
> > +                       compatible = "arasan,sdhci-4.9a";
> > +                       reg = <0x0 0x1c000000 0x0 0x100>;
> > +                       interrupts = <0x0 0x49 0x4>;
> > +                       dma-coherent;
> > +                       clock-names = "clk_xin", "clk_ahb";
> > +                       clocks = <&sdioclk 0>, <&ahbclk 0>;
> > +               };
> > +
> >                 phy1: phy at 1f21a000 {
> >                         compatible = "apm,xgene-phy";
> >                         reg = <0x0 0x1f21a000 0x0 0x100>;
> > --
> > 1.8.2.1
> >
> 
> Can anyone from dt community review this patch ? I have changed the dts node
> names from sdhc to sdhci as per Arnd, Michael comments .

I was actually asking for it to be named 'mmc', not 'sdhci', because the
name is supposed to indicate the purpose of the device, not the
implementation. I realize that we are inconsistent here, just as with
'uart' vs 'serial', and that ePAPR does not define what to do.

We should probably add something to Documentation/devicetree/bindings/mmc/mmc.txt
about this topic and change all the dts files accordingly (unless there
is a risk for regressions). At the moment, the mmc.txt file also includes
an example with 'sdhci', not 'mmc'.

	Arnd

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH RESEND v6 1/2] arm64: dts: Add the arasan sdhci nodes in apm-storm.dtsi
  2015-05-12  7:28     ` Arnd Bergmann
@ 2015-05-12 12:30       ` Ulf Hansson
  0 siblings, 0 replies; 3+ messages in thread
From: Ulf Hansson @ 2015-05-12 12:30 UTC (permalink / raw)
  To: linux-arm-kernel

On 12 May 2015 at 09:28, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tuesday 12 May 2015 11:03:46 Suman Tripathi wrote:
>> > @@ -533,6 +567,15 @@
>> >                         interrupts = <0x0 0x4f 0x4>;
>> >                 };
>> >
>> > +               sdhci0: sdhci at 1c000000 {
>> > +                       compatible = "arasan,sdhci-4.9a";
>> > +                       reg = <0x0 0x1c000000 0x0 0x100>;
>> > +                       interrupts = <0x0 0x49 0x4>;
>> > +                       dma-coherent;
>> > +                       clock-names = "clk_xin", "clk_ahb";
>> > +                       clocks = <&sdioclk 0>, <&ahbclk 0>;
>> > +               };
>> > +
>> >                 phy1: phy at 1f21a000 {
>> >                         compatible = "apm,xgene-phy";
>> >                         reg = <0x0 0x1f21a000 0x0 0x100>;
>> > --
>> > 1.8.2.1
>> >
>>
>> Can anyone from dt community review this patch ? I have changed the dts node
>> names from sdhc to sdhci as per Arnd, Michael comments .
>
> I was actually asking for it to be named 'mmc', not 'sdhci', because the
> name is supposed to indicate the purpose of the device, not the
> implementation. I realize that we are inconsistent here, just as with
> 'uart' vs 'serial', and that ePAPR does not define what to do.

Then we need a common name to address the following purposes: SD, MMC,
eMMC, SDIO.

>
> We should probably add something to Documentation/devicetree/bindings/mmc/mmc.txt
> about this topic and change all the dts files accordingly (unless there
> is a risk for regressions). At the moment, the mmc.txt file also includes
> an example with 'sdhci', not 'mmc'.
>

I am happy to change, as long as we can come up with something better.

Kind regards
Uffe

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2015-05-12 12:30 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <1431333531-30491-1-git-send-email-stripathi@apm.com>
     [not found] ` <1431333531-30491-2-git-send-email-stripathi@apm.com>
2015-05-12  5:33   ` [PATCH RESEND v6 1/2] arm64: dts: Add the arasan sdhci nodes in apm-storm.dtsi Suman Tripathi
2015-05-12  7:28     ` Arnd Bergmann
2015-05-12 12:30       ` Ulf Hansson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox