[PATCH] PM / Runtime: Defer resuming of the device in pm_runtime_force_resume()

[laurent.pinchart@ideasonboard.com (Laurent Pinchart)]

Hi Ulf,

On Monday 25 Apr 2016 15:32:52 Ulf Hansson wrote:
> On 21 April 2016 at 19:31, Laurent Pinchart wrote:
> > On Thursday 21 Apr 2016 12:34:02 Ulf Hansson wrote:
> >> When the pm_runtime_force_suspend|resume() helpers were invented, we
> >> still had CONFIG_PM_RUNTIME and CONFIG_PM_SLEEP as separate Kconfig
> >> options.
> >> 
> >> To make sure these helpers worked for all combinations and without
> >> introducing too much of complexity, the device was always resumed in
> >> pm_runtime_force_resume().
> >> 
> >> More precisely, when CONFIG_PM_SLEEP was set and CONFIG_PM_RUNTIME was
> >> unset, we needed to resume the device as the subsystem/driver couldn't
> >> rely on using runtime PM to do it.
> >> 
> >> As the CONFIG_PM_RUNTIME option was merged into CONFIG_PM a while ago, it
> >> removed this combination, of using CONFIG_PM_SLEEP without the earlier
> >> CONFIG_PM_RUNTIME.
> >> 
> >> For this reason we can now rely on the subsystem/driver to use runtime PM
> >> to resume the device, instead of forcing that to be done in all cases. In
> >> other words, let's defer this to a later point when it's actually needed.
> >> 
> >> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> >> ---
> >> 
> >> Note, this patch is based upon another not yet queued patch [1]. The
> >> reason is simply because that [1] is a more important patch as it fixes a
> >> problem. It was posted to linux-pm April 8th and I expect it (or a new
> >> revision of it) to be applied before $subject patch.
> >> 
> >> [1]
> >> https://patchwork.kernel.org/patch/8782851
> >> 
> >> ---
> >> 
> >>  drivers/base/power/runtime.c | 11 +++++++++++
> >>  1 file changed, 11 insertions(+)
> >> 
> >> diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
> >> index b746904..a190ca0 100644
> >> --- a/drivers/base/power/runtime.c
> >> +++ b/drivers/base/power/runtime.c
> >> @@ -1506,6 +1506,17 @@ int pm_runtime_force_resume(struct device *dev)
> >>               goto out;
> >>       }
> >> 
> >> +     /*
> >> +      * The PM core increases the runtime PM usage count in the system
> >> +      * PM prepare phase. If the count is greather than 1 at this point,
> >> +      * someone else has also increased it. In such case, let's make
> >> +      * sure to runtime resume the device as that is likely what is
> >> +      * expected. In other case we trust the subsystem/driver to runtime
> >> +      * resume the device when it's actually needed.
> >> +      */
> >> +     if (atomic_read(&dev->power.usage_count) < 2)
> >> +             goto out;
> >> +
> >>       ret = pm_runtime_set_active(dev);
> >>       if (ret)
> >>               goto out;
> > 
> > This works in the sense that it prevents devices from being PM resumed at
> > system resume time if not needed. However, devices that are part of a PM
> > domain and that were idle before system suspend are suspended twice (with
> > their .runtime_suspend() handler called twice), which is not good at all.
> > 
> > The first suspend occurs at system suspend time, with
> > pm_runtime_force_suspend() rightfully suspending the device as the device
> > is active (due to being woken up by pm_genpd_prepare()). The second
> > suspend occurs at resume time due to device_complete() calling
> > pm_runtime_put().
> > 
> > I've tracked the issue to the fact that pm_genpd_complete() calls
> > pm_runtime_set_active() regardless of whether the device was PM resumed or
> > not. As pm_runtime_force_suspend() doesn't resume devices with this patch
> > applied, the pm_runtime_put() call from device_complete() will try to
> > runtime suspend the device a second time as the state is incorrectly set
> > to RPM_ACTIVE.
> > 
> > With the current genpd implementation this patch isn't needed (and neither
> > is my patch), as genpd expects the device to be always active when the
> > system is resumed. However, when genpd isn't used,
> > pm_runtime_force_resume() needs to skip resuming devices that were
> > suspended before system suspend. This patch looks good to me to fix that
> > problem.
> > 
> > Do we need to fix genpd first ?
> 
> Following you reasoning, I agree!
> 
> Let's put this patch on hold for a little while. I am already working
> on changing genpd, so it shouldn't take long before I can post some
> additional genpd patches improving the behaviour.

I'd like to see something merged for v4.7 if possible. I agree that my patch 
isn't a long term solution (we want to avoid adding additional fields to the 
device power structure), but it has the benefit of being available now and 
fixing the problem I ran into with drivers that would be broken on v4.7 
without a fix. Do you think you could get a better fix ready in time for v4.7 
? If so I'm fine with dropping this patch, but otherwise I'd prefer to get it 
merged and reverted as part of your better implementation for v4.8.

-- 
Regards,

Laurent Pinchart