[GIT PULL] Xilinx Zynq dt changes for v3.19

[GIT PULL] Xilinx Zynq dt changes for v3.19

[Michal Simek]

Hi,

please pull these 4 patches to your arm-soc tree.
There will be conflict in DT for parallella because of fix
"ARM: dts: zynq: Enable PL clocks for Parallella"
(sha1: 92c9e0c780e61f821ab8a08f0d4d4fd33ba1197c)

Resolution of this conflict is:
&clkc {
	ps-clk-frequency = <33333333>;
	fclk-enable = <0xf>;
};

Thanks,
Michal


The following changes since commit f114040e3ea6e07372334ade75d1ee0775c355e1:

  Linux 3.18-rc1 (2014-10-19 18:08:38 -0700)

are available in the git repository at:

  https://github.com/Xilinx/linux-xlnx.git tags/zynq-dt-for-3.19

for you to fetch changes up to 7b01abb06c997e5431cdfc62267449aaef1d77c7:

  arm: dts: zynq: Add Digilent ZYBO board (2014-12-01 09:22:53 +0100)

----------------------------------------------------------------
arm: Xilinx Zynq dt patches for v3.19

- Declare Digilent and vendor
- Add Zybo board support
- Fix VDMA documentation to be align with the driver

----------------------------------------------------------------
Andreas F?rber (1):
      Documentation: devicetree: Fix Xilinx VDMA specification

Peter Crosthwaite (3):
      doc: dt: vendor-prefixes: Add Digilent Inc
      arm: dts: zynq: Move crystal freq. to board level
      arm: dts: zynq: Add Digilent ZYBO board

 Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt |  2 +-
 Documentation/devicetree/bindings/vendor-prefixes.txt        |  1 +
 arch/arm/boot/dts/Makefile                                   |  3 ++-
 arch/arm/boot/dts/zynq-7000.dtsi                             |  1 -
 arch/arm/boot/dts/zynq-parallella.dts                        |  4 ++++
 arch/arm/boot/dts/zynq-zc702.dts                             |  4 ++++
 arch/arm/boot/dts/zynq-zc706.dts                             |  4 ++++
 arch/arm/boot/dts/zynq-zed.dts                               |  4 ++++
 arch/arm/boot/dts/zynq-zybo.dts                              | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 72 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/zynq-zybo.dts

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141201/9f10c972/attachment.sig>

[GIT PULL] Xilinx Zynq dt changes for v3.19

[Arnd Bergmann]

On Monday 01 December 2014 09:31:20 Michal Simek wrote:
> Hi,
> 
> please pull these 4 patches to your arm-soc tree.
> There will be conflict in DT for parallella because of fix
> "ARM: dts: zynq: Enable PL clocks for Parallella"
> (sha1: 92c9e0c780e61f821ab8a08f0d4d4fd33ba1197c)
> 
> Resolution of this conflict is:
> &clkc {
> 	ps-clk-frequency = <33333333>;
> 	fclk-enable = <0xf>;
> };

Pulled into next/dt

> ----------------------------------------------------------------
> Andreas F?rber (1):
>       Documentation: devicetree: Fix Xilinx VDMA specification
> 
> Peter Crosthwaite (3):
>       doc: dt: vendor-prefixes: Add Digilent Inc
>       arm: dts: zynq: Move crystal freq. to board level
>       arm: dts: zynq: Add Digilent ZYBO board

Please take tare to always use the prefix that is used most commonly
for each subsystem when writing the patch changelog. Here, it should have
been "ARM:" instead of "arm:". The actual changes are all good though.

Thanks,

	Arnd