Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: wangzhou1@hisilicon.com (Zhou Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v3] mtd: hisilicon: add device tree node for NAND controller
Date: Thu, 26 Mar 2015 12:53:57 +0800	[thread overview]
Message-ID: <551390E5.2090209@hisilicon.com> (raw)
In-Reply-To: <CAD6h2NQr_Z600vC+7RRuLgoGvV4MCXz8TAd4C5eCnqbA0ZdPWw@mail.gmail.com>

On 2015/3/26 10:13, Haojian Zhuang wrote:
> On 25 March 2015 at 15:04, Zhou Wang <wangzhou1@hisilicon.com> wrote:
>> This patch adds dts support for NAND flash controller of Hisilicon Soc Hip04.
>> Now it is based on v4.0-rc5
>>
>> Changes in v3:
>> - Change E-mail address in signed-off-by to "wangzhou1 at hisilicon.com"
>> Changes in v2:
>> - Base on v3.19-rc1
>> - Use nand-ecc-strength, nand-ecc-step-size to replace hisi,nand-ecc-bits
>> Changes in v1:
>> - Move partition and other board related information into board dts file:
>>   hip04-d01.dts
>>
>> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>> ---
>>  arch/arm/boot/dts/hip04-d01.dts | 27 +++++++++++++++++++++++++++
>>  arch/arm/boot/dts/hip04.dtsi    |  7 +++++++
>>  2 files changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
>> index 40a9e33..ba04dd5 100644
>> --- a/arch/arm/boot/dts/hip04-d01.dts
>> +++ b/arch/arm/boot/dts/hip04-d01.dts
>> @@ -28,5 +28,32 @@
>>                 uart0: uart at 4007000 {
>>                         status = "ok";
>>                 };
>> +
>> +               nand: nand at 4020000 {
>> +                       nand-bus-width = <8>;
>> +                       nand-ecc-mode = "hw";
>> +                       nand-ecc-strength = <16>;
>> +                       nand-ecc-step-size = <1024>;
>> +
>> +                       partition at 0 {
>> +                               label = "nand_text";
>> +                               reg = <0x00000000 0x00400000>;
>> +                       };
>> +
>> +                       partition at 00400000 {
>> +                               label = "nand_monitor";
>> +                               reg = <0x00400000 0x00400000>;
>> +                       };
>> +
>> +                       partition at 00800000 {
>> +                               label = "nand_kernel";
>> +                               reg = <0x00800000 0x00800000>;
>> +                       };
>> +
>> +                       partition at 01000000 {
>> +                               label = "nand_fs";
>> +                               reg = <0x01000000 0x1f000000>;
>> +                       };
>> +               };
>>         };
>>  };
>> diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
>> index 2388145..ac32fce 100644
>> --- a/arch/arm/boot/dts/hip04.dtsi
>> +++ b/arch/arm/boot/dts/hip04.dtsi
>> @@ -269,6 +269,13 @@
>>                         interrupts = <0 372 4>;
>>                 };
>>
>> +               nand: nand at 4020000 {
>> +                       compatible = "hisilicon,504-nfc";
>> +                       reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
>> +                       interrupts = <0 379 4>;
>> +                       #address-cells = <1>;
>> +                       #size-cells = <1>;
>> +               };
>>         };
>>
>>         etb at 0,e3c42000 {
>> --
>> 1.9.1
>>
> 
> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
> 
> .
>


Thanks!
Zhou Wang

  reply	other threads:[~2015-03-26  4:53 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-25  7:04 [RESEND PATCH v3] mtd: hisilicon: add device tree node for NAND controller Zhou Wang
2015-03-26  2:13 ` Haojian Zhuang
2015-03-26  4:53   ` Zhou Wang [this message]
2015-03-27 17:35 ` Brian Norris
2015-03-28  7:00   ` Zhou Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=551390E5.2090209@hisilicon.com \
    --to=wangzhou1@hisilicon.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox