[PATCH] dmaengine: qcom: hidma: fix autosuspend cleanup during teardown

[PATCH] dmaengine: qcom: hidma: fix autosuspend cleanup during teardown

[Guangshuo Li]

hidma_probe() calls pm_runtime_use_autosuspend(), but neither the probe
failure path nor hidma_remove() calls the matching
pm_runtime_dont_use_autosuspend() before disabling runtime PM.

If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped and usage_count remains
unbalanced.

Add the missing pm_runtime_dont_use_autosuspend() calls to both the
probe failure and remove paths before disabling runtime PM.

This issue was found by manual code inspection.

Fixes: 67a2003e0607 ("dmaengine: add Qualcomm Technologies HIDMA channel driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
---
 drivers/dma/qcom/hidma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index c939635be21d..78fd765c81e4 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -893,6 +893,7 @@ static int hidma_probe(struct platform_device *pdev)
 		hidma_free(dmadev);
 bailout:
 	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return rc;
 }
@@ -930,6 +931,7 @@ static void hidma_remove(struct platform_device *pdev)
 
 	dev_info(&pdev->dev, "HI-DMA engine removed\n");
 	pm_runtime_put_sync_suspend(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 }
 
-- 
2.43.0

Re: [PATCH] dmaengine: qcom: hidma: fix autosuspend cleanup during teardown

[Frank Li]

On Sat, Aug 08, 2026 at 07:25:51PM +0800, Guangshuo Li wrote:
> hidma_probe() calls pm_runtime_use_autosuspend(), but neither the probe
> failure path nor hidma_remove() calls the matching
> pm_runtime_dont_use_autosuspend() before disabling runtime PM.
>
> If the autosuspend delay is set to a negative value while autosuspend
> is enabled, the runtime PM core increments usage_count to prevent
> runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
> during teardown, this reference is not dropped and usage_count remains
> unbalanced.
>
> Add the missing pm_runtime_dont_use_autosuspend() calls to both the
> probe failure and remove paths before disabling runtime PM.
>
> This issue was found by manual code inspection.


I seen many similar patches to fix similar problem for difference DMA
engineer driver.

Please use devm_runtime_pm_enable() to fix it.

Frank
>
> Fixes: 67a2003e0607 ("dmaengine: add Qualcomm Technologies HIDMA channel driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> ---
>  drivers/dma/qcom/hidma.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
> index c939635be21d..78fd765c81e4 100644
> --- a/drivers/dma/qcom/hidma.c
> +++ b/drivers/dma/qcom/hidma.c
> @@ -893,6 +893,7 @@ static int hidma_probe(struct platform_device *pdev)
>  		hidma_free(dmadev);
>  bailout:
>  	pm_runtime_put_sync(&pdev->dev);
> +	pm_runtime_dont_use_autosuspend(&pdev->dev);
>  	pm_runtime_disable(&pdev->dev);
>  	return rc;
>  }
> @@ -930,6 +931,7 @@ static void hidma_remove(struct platform_device *pdev)
>
>  	dev_info(&pdev->dev, "HI-DMA engine removed\n");
>  	pm_runtime_put_sync_suspend(&pdev->dev);
> +	pm_runtime_dont_use_autosuspend(&pdev->dev);
>  	pm_runtime_disable(&pdev->dev);
>  }
>
> --
> 2.43.0
>

Re: [PATCH] dmaengine: qcom: hidma: fix autosuspend cleanup during teardown

[Krzysztof Kozlowski]

On 08/08/2026 13:25, Guangshuo Li wrote:
> hidma_probe() calls pm_runtime_use_autosuspend(), but neither the probe
> failure path nor hidma_remove() calls the matching
> pm_runtime_dont_use_autosuspend() before disabling runtime PM.
> 
> If the autosuspend delay is set to a negative value while autosuspend
> is enabled, the runtime PM core increments usage_count to prevent
> runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
> during teardown, this reference is not dropped and usage_count remains
> unbalanced.
> 
> Add the missing pm_runtime_dont_use_autosuspend() calls to both the
> probe failure and remove paths before disabling runtime PM.
> 
> This issue was found by manual code inspection.
> 
> Fixes: 67a2003e0607 ("dmaengine: add Qualcomm Technologies HIDMA channel driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>

You sent vast amount of patches, all separate, making it very difficult
to track and respond in efficient way. Do not do that.

Group your work per subsystem.

You were asked to clarify and respond to incorrect fixes statement. I do
not see how you clarified and responded at all.

Best regards,
Krzysztof