* [GIT PULL] pxa for v4.9
@ 2016-09-09 17:27 Robert Jarzmik
2016-09-14 22:30 ` Arnd Bergmann
0 siblings, 1 reply; 2+ messages in thread
From: Robert Jarzmik @ 2016-09-09 17:27 UTC (permalink / raw)
To: linux-arm-kernel
Hello Arnd, Kevin, Olof,
Please consider this pull request for pxa 4.8 cycle. The diffstat should look
nice as the legacy dma code is removed at last.
The following changes since commit 29b4817d4018df78086157ea3a55c1d9424a7cfc:
Linux 4.8-rc1 (2016-08-07 18:18:00 -0700)
are available in the git repository at:
https://github.com/rjarzmik/linux.git tags/pxa-for-4.9
for you to fetch changes up to 9ba63e3cc849cdaf3b675c47cc51fe35419e5117:
ARM: pxa: pxa_cplds: fix interrupt handling (2016-09-09 18:09:53 +0200)
----------------------------------------------------------------
This is the pxa changes for v4.9 cycle.
This cycle is covering :
- the removal of the legacy DMA API
This is the major contributor to the negative diffstat, as dmaengine
have taken over in this area.
- IDE subsystem defconfig fixes
- preparation for pxa25x to be device-tree compliant
- various irq related fixes
----------------------------------------------------------------
Bartlomiej Zolnierkiewicz (4):
arm: colibri_pxa270_defconfig: disable IDE subsystem
arm: lpda270_defconfig: disable IDE subsystem
arm: pxa255-idp_defconfig: disable IDE subsystem
arm: trizeps4_defconfig: disable IDE subsystem
Markus Elfring (1):
ARM: pxa: Use kmalloc_array() in pxa_pm_init()
Petr Cvek (1):
ARM: pxa: magician: Remove duplicated I2C pins declaration
Robert Jarzmik (7):
ARM: pxa: remove devicetree boards from pxa_defconfig
ARM: pxa: remove platform dma code
ARM: pxa: prepare pxa25x interrupts for device-tree platforms
ARM: pxa: add pxa25x device-tree support
ARM: pxa: fix GPIO double shifts
ARM: pxa: remove irq init from dt machines
ARM: pxa: pxa_cplds: fix interrupt handling
arch/arm/configs/colibri_pxa270_defconfig | 1 -
arch/arm/configs/lpd270_defconfig | 1 -
arch/arm/configs/pxa255-idp_defconfig | 1 -
arch/arm/configs/pxa_defconfig | 2 -
arch/arm/configs/trizeps4_defconfig | 2 -
arch/arm/mach-pxa/Kconfig | 11 +
arch/arm/mach-pxa/Makefile | 3 +-
arch/arm/mach-pxa/corgi_pm.c | 13 +-
arch/arm/mach-pxa/devices.h | 1 +
arch/arm/mach-pxa/generic.h | 2 -
arch/arm/mach-pxa/include/mach/dma.h | 1 -
arch/arm/mach-pxa/magician.c | 4 -
arch/arm/mach-pxa/pm.c | 5 +-
arch/arm/mach-pxa/pxa-dt.c | 35 ++-
arch/arm/mach-pxa/pxa25x.c | 26 +-
arch/arm/mach-pxa/pxa27x.c | 14 +-
arch/arm/mach-pxa/pxa3xx.c | 11 +-
arch/arm/mach-pxa/pxa_cplds_irqs.c | 24 +-
arch/arm/mach-pxa/sharpsl_pm.c | 2 +-
arch/arm/mach-pxa/sharpsl_pm.h | 2 +-
arch/arm/mach-pxa/spitz_pm.c | 9 +-
arch/arm/plat-pxa/Makefile | 2 -
arch/arm/plat-pxa/dma.c | 386 ------------------------------
arch/arm/plat-pxa/include/plat/dma.h | 100 --------
24 files changed, 95 insertions(+), 563 deletions(-)
delete mode 100644 arch/arm/plat-pxa/dma.c
delete mode 100644 arch/arm/plat-pxa/include/plat/dma.h
Cheers.
--
Robert
^ permalink raw reply [flat|nested] 2+ messages in thread
* [GIT PULL] pxa for v4.9
2016-09-09 17:27 [GIT PULL] pxa for v4.9 Robert Jarzmik
@ 2016-09-14 22:30 ` Arnd Bergmann
0 siblings, 0 replies; 2+ messages in thread
From: Arnd Bergmann @ 2016-09-14 22:30 UTC (permalink / raw)
To: linux-arm-kernel
On Friday, September 9, 2016 7:27:45 PM CEST Robert Jarzmik wrote:
> This is the pxa changes for v4.9 cycle.
>
> This cycle is covering :
> - the removal of the legacy DMA API
> This is the major contributor to the negative diffstat, as dmaengine
> have taken over in this area.
Very nice!
> - IDE subsystem defconfig fixes
> - preparation for pxa25x to be device-tree compliant
> - various irq related fixes
Pulled into next/soc, thanks!
Arnd
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-09-14 22:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-09 17:27 [GIT PULL] pxa for v4.9 Robert Jarzmik
2016-09-14 22:30 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox