Re: [PATCH v4 4/6] arm64: dts: qcom: shikra: Add pin configuration for mclks

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 6/15/26 10:33 AM, Nihal Kumar Gupta wrote:
> Add pinctrl configuration for the four available camera master clocks.
> 
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
> Signed-off-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/shikra.dtsi | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
> index 57732804a6c6a114a407a4a541a1cc7af7635ea2..16b547131e8b14541abc68ff7cda126ba777ad80 100644
> --- a/arch/arm64/boot/dts/qcom/shikra.dtsi
> +++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
> @@ -380,6 +380,34 @@ cci_i2c1_sleep: cci-i2c1-sleep-state {
>  				bias-pull-down;
>  			};
>  
> +			cam_mclk0_default: cam-mclk0-default-state {
> +				pins = "gpio34";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam_mclk1_default: cam-mclk1-default-state {
> +				pins = "gpio35";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam_mclk2_default: cam-mclk2-default-state {
> +				pins = "gpio96";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam_mclk3_default: cam-mclk3-default-state {
> +				pins = "gpio98";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};

Please try to keep the entries roughly sorted by the pin index

For the entries themselves:

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad