Re: [PATCH v2 3/4] hwmon: tmp108: Add support for I3C device

[Guenter Roeck <linux@roeck-us.net>]

On 11/8/24 14:26, Frank Li wrote:
> Add support for I3C device in the tmp108 driver to handle the P3T1085
> sensor. Register the I3C device driver to enable I3C functionality for the
> sensor.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>   drivers/hwmon/tmp108.c | 31 +++++++++++++++++++++++++++++++
>   1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/hwmon/tmp108.c b/drivers/hwmon/tmp108.c
> index bfbea6349a95f..83d6847cb542c 100644
> --- a/drivers/hwmon/tmp108.c
> +++ b/drivers/hwmon/tmp108.c
> @@ -13,6 +13,8 @@
>   #include <linux/mutex.h>
>   #include <linux/of.h>
>   #include <linux/i2c.h>
> +#include <linux/i3c/device.h>
> +#include <linux/i3c/master.h>
>   #include <linux/init.h>
>   #include <linux/jiffies.h>
>   #include <linux/regmap.h>
> @@ -442,6 +444,35 @@ static struct i2c_driver tmp108_driver = {
>   
>   module_i2c_driver(tmp108_driver);
>   
> +#ifdef CONFIG_REGMAP_I3C

REGMAP_I3C needs to be selected in Kconfig. Maybe with "select REGMAP_I3C if I3C" or
similar, but we'll also need to cover situations where I2C=y and I3C=n. That means
that an additional "depends on I3C || I3C=n" may be necessary. In summary,

	config SENSORS_TMP108
         tristate "Texas Instruments TMP108 and P3T1085"   <--
         depends on I2C
	select REGMAP_I2C
	depends on depends on I3C || I3C=n                <--
	select REGMAP_I3C if I3C                          <--
         help
           If you say yes here you get support for Texas Instruments TMP108
           and compatible sensor chips.                    <--

           This driver can also be built as a module. If so, the module
           will be called tmp108.

Thanks,
Guenter

> +static const struct i3c_device_id p3t1085_i3c_ids[] = {
> +	I3C_DEVICE(0x011b, 0x1529, NULL),
> +	{},
> +};
> +MODULE_DEVICE_TABLE(i3c, p3t1085_i3c_ids);
> +
> +static int p3t1085_i3c_probe(struct i3c_device *i3cdev)
> +{
> +	struct regmap *regmap;
> +
> +	regmap = devm_regmap_init_i3c(i3cdev, &tmp108_regmap_config);
> +	if (IS_ERR(regmap))
> +		return dev_err_probe(&i3cdev->dev, PTR_ERR(regmap),
> +				     "Failed to register i3c regmap\n");
> +
> +	return tmp108_common_probe(&i3cdev->dev, regmap, "p3t1085_i3c");
> +}
> +
> +static struct i3c_driver p3t1085_driver = {
> +	.driver = {
> +		.name = "p3t1085_i3c",
> +	},
> +	.probe = p3t1085_i3c_probe,
> +	.id_table = p3t1085_i3c_ids,
> +};
> +module_i3c_driver(p3t1085_driver);
> +#endif
> +
>   MODULE_AUTHOR("John Muir <john@jmuir.com>");
>   MODULE_DESCRIPTION("Texas Instruments TMP108 temperature sensor driver");
>   MODULE_LICENSE("GPL");
>