[PATCH v6 0/2] Enable audio support for J721S2 EVM

[PATCH v6 0/2] Enable audio support for J721S2 EVM

[Moteen Shah]

Earlier version of the patchset sent upstream[0] was rejected as
its dependency[1], which resolves the DTBS check errors introduced
by [0] also got rejected on the grounds of ABI breakage.

Another solution to fix the DTBS check errors introduced by [0] is
to modify the ti,j721e-system-controller.yaml binding to allow
audio-refclk as clock-controller child. This is done in the first
patch of this series.

Changes since v5:
Link to v5:
https://lore.kernel.org/all/20260520115603.2662930-1-m-shah@ti.com/
- Move audio_refclk1 clock node from the overlay (k3-j721s2-evm-audio.dtso)
  to the main DTSI (k3-j721s2-main.dtsi) so it is always available
  independent of the overlay being applied
- Drop the &scm_conf block from the overlay since it is now in main.dtsi

Changes since v4:
Link to v4:
https://lore.kernel.org/all/20260519142341.2531948-1-m-shah@ti.com/
- Explicitly disable main_mcan3 and main_mcan5 as they will silently
  break mcasp audio routing

Link to v3:
https://lore.kernel.org/all/20260330094459.128648-1-m-shah@ti.com/
Link to v2:
https://lore.kernel.org/all/20260205130707.2033197-1-m-shah@ti.com/
Link to v1:
https://lore.kernel.org/all/20260112104536.83309-1-m-shah@ti.com/

Bootlogs:
https://gist.github.com/Jamm02/8ee551c2c8db3a58a9aa7976e049fa28

[0]: https://lore.kernel.org/linux-arm-kernel/20250604104656.38752-1-j-choudhary@ti.com/
[1]: https://lore.kernel.org/all/20250603095609.33569-4-j-choudhary@ti.com/

Jayesh Choudhary (1):
  arm64: dts: ti: Add audio overlay for k3-j721s2-evm

Moteen Shah (1):
  dt-bindings: ti: Update audio-refclk binding and j721e system
    controller

 .../bindings/clock/ti,am62-audio-refclk.yaml  |   8 +-
 .../soc/ti/ti,j721e-system-controller.yaml    |   6 +-
 arch/arm64/boot/dts/ti/Makefile               |   4 +
 .../boot/dts/ti/k3-j721s2-evm-audio.dtso      | 157 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |   9 +
 5 files changed, 180 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso

-- 
2.34.1

[PATCH v6 1/2] dt-bindings: ti: Update audio-refclk binding and j721e system controller

[Moteen Shah]

Add ti,j721s2-audio-refclk as a supported compatible string in the
ti,am62-audio-refclk binding. J721S2 uses the same audio reference
clock IP block first introduced on AM62. Per writing-bindings
guidelines, the J721S2-specific compatible is added as the primary
string with ti,am62-audio-refclk as the fallback.

Also extend the ti,j721e-system-controller clock-controller@ child
pattern to accept audio-refclk schemas alongside ehrpwm-tbclk via a
oneOf constraint, fixing the alphanumerical ordering of $refs.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Moteen Shah <m-shah@ti.com>
---
 .../devicetree/bindings/clock/ti,am62-audio-refclk.yaml   | 8 ++++++--
 .../bindings/soc/ti/ti,j721e-system-controller.yaml       | 6 ++++--
 2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
index b2e40bd39a3af..6c8fb0793070d 100644
--- a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
@@ -11,8 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - const: ti,am62-audio-refclk
+    oneOf:
+      - items:
+          - const: ti,am62-audio-refclk
+      - items:
+          - const: ti,j721s2-audio-refclk
+          - const: ti,am62-audio-refclk
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml
index f3bd0be3b279f..364be49f8c7c7 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml
@@ -53,9 +53,11 @@ patternProperties:
 
   "^clock-controller@[0-9a-f]+$":
     type: object
-    $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+    oneOf:
+      - $ref: /schemas/clock/ti,am62-audio-refclk.yaml#
+      - $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
     description:
-      Clock provider for TI EHRPWM nodes.
+      Clock provider for TI EHRPWM or Audio Reference Clock nodes.
 
   "phy@[0-9a-f]+$":
     type: object
-- 
2.34.1

[PATCH v6 2/2] arm64: dts: ti: Add audio overlay for k3-j721s2-evm

[Moteen Shah]

From: Jayesh Choudhary <j-choudhary@ti.com>

Add device tree overlay to enable analog audio support on J721S2-EVM
using PCM3168A codec connected to McASP4 serializers.

- Add audio_refclk1 clock node to k3-j721s2-main.dtsi
- Add nodes for sound-card, audio codec, I2C3 and McASP4
- Add pinmux for I2C3, McASP4, AUDIO_EXT_REFCLK1 and WKUP_GPIO_0
- Add GPIO expander (TCA6408) for codec control
- Add GPIO hogs to route I2C3 lines and McASP serializers
- Set idle-state to 0 in mux0 and mux1 for McASP signal routing

Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Co-developed-by: Moteen Shah <m-shah@ti.com>
Signed-off-by: Moteen Shah <m-shah@ti.com>
---
 arch/arm64/boot/dts/ti/Makefile               |   4 +
 .../boot/dts/ti/k3-j721s2-evm-audio.dtso      | 157 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |   9 +
 3 files changed, 170 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 371f9a043fe52..d9824e17085f4 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -180,6 +180,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
 k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-audio.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-usb0-type-a.dtbo
 
@@ -320,6 +321,8 @@ k3-j721e-evm-pcie1-ep-dtbs := k3-j721e-common-proc-board.dtb \
 	k3-j721e-evm-pcie1-ep.dtbo
 k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
+k3-j721s2-evm-audio-dtbs := k3-j721s2-common-proc-board.dtb \
+	k3-j721s2-evm-audio.dtbo
 k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
 	k3-j721s2-evm-pcie1-ep.dtbo
 k3-j721s2-evm-usb0-type-a-dtbs := k3-j721s2-common-proc-board.dtb \
@@ -396,6 +399,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-j721e-evm-pcie0-ep.dtb \
 	k3-j721e-evm-pcie1-ep.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtb \
+	k3-j721s2-evm-audio.dtb \
 	k3-j721s2-evm-pcie1-ep.dtb \
 	k3-j721s2-evm-usb0-type-a.dtb \
 	k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso
new file mode 100644
index 0000000000000..ac5a827e1b750
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Overlay for J721S2 Audio Support
+ *
+ * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	codec_audio: sound {
+		compatible = "ti,j7200-cpb-audio";
+		model = "j721s2-cpb";
+
+		ti,cpb-mcasp = <&mcasp4>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 213 0>, <&k3_clks 213 1>,
+			 <&k3_clks 157 299>, <&k3_clks 157 328>;
+		clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000",
+			      "cpb-codec-scki", "cpb-codec-scki-48000";
+	};
+
+	i2c_mux: mux-controller-2 {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&wkup_gpio0 54 GPIO_ACTIVE_HIGH>;
+		idle-state = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_i2c3_mux_pins_default>;
+	};
+};
+
+&main_pmx0 {
+	mcasp4_pins_default: mcasp4-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c8, PIN_OUTPUT_PULLDOWN, 1) /* (AD28) MCASP4_ACLKX */
+			J721S2_IOPAD(0x06c, PIN_OUTPUT_PULLDOWN, 1) /* (V26) MCASP4_AFSX */
+			J721S2_IOPAD(0x068, PIN_INPUT_PULLDOWN, 1) /* (U28) MCASP4_AXR1 */
+			J721S2_IOPAD(0x0c4, PIN_OUTPUT_PULLDOWN, 1) /* (AB26) MCASP4_AXR2 */
+			J721S2_IOPAD(0x070, PIN_OUTPUT_PULLDOWN, 1) /* (R27) MCASP4_AXR3 */
+		>;
+	};
+
+	audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x078, PIN_OUTPUT, 1) /* (Y25) MCAN2_RX.AUDIO_EXT_REFCLK1 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	main_i2c3_mux_pins_default: main-i2c3-mux-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x038, PIN_OUTPUT, 7) /* (B27) WKUP_GPIO0_54 */
+		>;
+	};
+};
+
+&exp2 {
+	p09-hog {
+		/* P09 - MCASP/TRACE_MUX_S0 */
+		gpio-hog;
+		gpios = <9 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "MCASP/TRACE_MUX_S0";
+	};
+
+	p10-hog {
+		/* P10 - MCASP/TRACE_MUX_S1 */
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "MCASP/TRACE_MUX_S1";
+	};
+};
+
+&mux0 {
+	idle-state = <0>;
+};
+
+&mux1 {
+	idle-state = <0>;
+};
+
+&main_mcan3 {
+	/* Conflicts with McASP4 signal routing via mux0 */
+	status = "disabled";
+};
+
+&main_mcan5 {
+	/* Conflicts with McASP4 signal routing via mux1 */
+	status = "disabled";
+};
+
+&k3_clks {
+	/* Configure AUDIO_EXT_REFCLK1 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_ext_refclk1_pins_default>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+	mux-states = <&i2c_mux 1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CODEC_RSTZ", "CODEC_SPARE1",
+				  "UB926_RESETN", "UB926_LOCK",
+				  "UB926_PWR_SW_CNTRL", "UB926_TUNER_RESET",
+				  "UB926_GPIO_SPARE";
+	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+		#sound-dai-cells = <1>;
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+		clocks = <&audio_refclk1>;
+		clock-names = "scki";
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
+};
+
+&mcasp4 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp4_pins_default>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		0 2 1 1
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 1228ac5711bf0..36a01a06dd254 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -74,6 +74,15 @@ ehrpwm_tbclk: clock-controller@140 {
 			reg = <0x140 0x18>;
 			#clock-cells = <1>;
 		};
+
+		audio_refclk1: clock-controller@42e4 {
+			compatible = "ti,j721s2-audio-refclk", "ti,am62-audio-refclk";
+			reg = <0x42e4 0x4>;
+			clocks = <&k3_clks 157 299>;
+			assigned-clocks = <&k3_clks 157 299>;
+			assigned-clock-parents = <&k3_clks 157 328>;
+			#clock-cells = <0>;
+		};
 	};
 
 	main_ehrpwm0: pwm@3000000 {
-- 
2.34.1

Re: [PATCH v6 2/2] arm64: dts: ti: Add audio overlay for k3-j721s2-evm

[Wang, Sen]

On 6/19/2026 1:27 AM, Shah, Moteen wrote:
> From: Jayesh Choudhary <j-choudhary@ti.com>
> 
> Add device tree overlay to enable analog audio support on J721S2-EVM
> using PCM3168A codec connected to McASP4 serializers.
> 
> - Add audio_refclk1 clock node to k3-j721s2-main.dtsi
> - Add nodes for sound-card, audio codec, I2C3 and McASP4
> - Add pinmux for I2C3, McASP4, AUDIO_EXT_REFCLK1 and WKUP_GPIO_0
> - Add GPIO expander (TCA6408) for codec control
> - Add GPIO hogs to route I2C3 lines and McASP serializers
> - Set idle-state to 0 in mux0 and mux1 for McASP signal routing
> 
Hi Moteen, thanks for the patch.

Reviewed-by: Sen Wang <sen@ti.com>

Re: [PATCH v6 1/2] dt-bindings: ti: Update audio-refclk binding and j721e system controller

[Vignesh Raghavendra]

Moteen,

On 19/06/26 11:57, Moteen Shah wrote:
> Add ti,j721s2-audio-refclk as a supported compatible string in the
> ti,am62-audio-refclk binding. J721S2 uses the same audio reference
> clock IP block first introduced on AM62. Per writing-bindings
> guidelines, the J721S2-specific compatible is added as the primary
> string with ti,am62-audio-refclk as the fallback.
> 
> Also extend the ti,j721e-system-controller clock-controller@ child
> pattern to accept audio-refclk schemas alongside ehrpwm-tbclk via a
> oneOf constraint, fixing the alphanumerical ordering of $refs.
> 
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Moteen Shah <m-shah@ti.com>
> ---
>  .../devicetree/bindings/clock/ti,am62-audio-refclk.yaml   | 8 ++++++--
>  .../bindings/soc/ti/ti,j721e-system-controller.yaml       | 6 ++++--
>  2 files changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml


You don't have any CCF maintainers in To/CC. This patch will go nowhere.

./scripts/get_maintainer.pl -f Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml 
Michael Turquette <mturquette@baylibre.com> (maintainer:COMMON CLK FRAMEWORK)
Stephen Boyd <sboyd@kernel.org> (maintainer:COMMON CLK FRAMEWORK)
Brian Masney <bmasney@redhat.com> (reviewer:COMMON CLK FRAMEWORK)
linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK)

[...]

-- 
Regards
Vignesh
https://ti.com/opensource