public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
* Re: [PATCH 1/2] ARM: dts: marvell: armada: drop incorrect reg in fixed regulators
       [not found] <20230726070254.103661-1-krzysztof.kozlowski@linaro.org>
@ 2023-08-12 15:05 ` Gregory CLEMENT
       [not found] ` <20230726070254.103661-2-krzysztof.kozlowski@linaro.org>
  1 sibling, 0 replies; 2+ messages in thread
From: Gregory CLEMENT @ 2023-08-12 15:05 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Andrew Lunn, Sebastian Hesselbarth,
	Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
	devicetree, linux-kernel
  Cc: Krzysztof Kozlowski

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:

> Fixed regulators are not in some bus and bindings do not allow a "reg"
> property.  Move them out of "regulators" node to top-level.
>
>   armada-370-dlink-dns327l.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>  .../dts/marvell/armada-370-dlink-dns327l.dts  |  83 ++++++--------
>  .../marvell/armada-370-seagate-nas-4bay.dts   |  43 ++++---
>  .../marvell/armada-370-seagate-nas-xbay.dtsi  |  46 ++++----
>  ...armada-370-seagate-personal-cloud-2bay.dts |  21 ++--
>  .../armada-370-seagate-personal-cloud.dtsi    |  43 +++----
>  .../marvell/armada-370-synology-ds213j.dts    |  54 ++++-----
>  .../dts/marvell/armada-xp-synology-ds414.dts  | 105 +++++++++---------
>  7 files changed, 177 insertions(+), 218 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
> index 561195b749eb..d4c4efabd254 100644
> --- a/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
> +++ b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
> @@ -105,54 +105,45 @@ led-backup {
>  		};
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> +	usb_power: regulator-1 {
> +		compatible = "regulator-fixed";
> +		pinctrl-0 = <&xhci_pwr_pin>;
> +		pinctrl-names = "default";
> +		regulator-name = "USB3.0 Port Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-boot-on;
> +		regulator-always-on;
> +		gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
> +	};
>  
> -		usb_power: regulator@1 {
> -			compatible = "regulator-fixed";
> -			reg = <1>;
> -			pinctrl-0 = <&xhci_pwr_pin>;
> -			pinctrl-names = "default";
> -			regulator-name = "USB3.0 Port Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			enable-active-high;
> -			regulator-boot-on;
> -			regulator-always-on;
> -			gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
> -		};
> +	sata_r_power: regulator-2 {
> +		compatible = "regulator-fixed";
> +		pinctrl-0 = <&sata_r_pwr_pin>;
> +		pinctrl-names = "default";
> +		regulator-name = "SATA-R Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <2000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
> +	};
>  
> -		sata_r_power: regulator@2 {
> -			compatible = "regulator-fixed";
> -			reg = <2>;
> -			pinctrl-0 = <&sata_r_pwr_pin>;
> -			pinctrl-names = "default";
> -			regulator-name = "SATA-R Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			startup-delay-us = <2000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
> -		};
> -
> -		sata_l_power: regulator@3 {
> -			compatible = "regulator-fixed";
> -			reg = <3>;
> -			pinctrl-0 = <&sata_l_pwr_pin>;
> -			pinctrl-names = "default";
> -			regulator-name = "SATA-L Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			startup-delay-us = <4000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> -		};
> +	sata_l_power: regulator-3 {
> +		compatible = "regulator-fixed";
> +		pinctrl-0 = <&sata_l_pwr_pin>;
> +		pinctrl-names = "default";
> +		regulator-name = "SATA-L Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <4000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
> index 9cb69999b1db..370ca9c43247 100644
> --- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
> +++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
> @@ -46,29 +46,26 @@ pca9554: pca9554@21 {
>  		};
>  	};
>  
> -	regulators {
> -		regulator@3 {
> -			compatible = "regulator-fixed";
> -			reg = <3>;
> -			regulator-name = "SATA2 power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
> -		};
> -		regulator@4 {
> -			compatible = "regulator-fixed";
> -			reg = <4>;
> -			regulator-name = "SATA3 power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
> -		};
> +	regulator-3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA2 power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	regulator-4 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA3 power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
>  	};
>  
>  	gpio-leds {
> diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
> index 822f10734946..ffb3179033e7 100644
> --- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
> +++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
> @@ -70,34 +70,26 @@ rtc@6f {
>  
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		pinctrl-names = "default";
> +	regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA0 power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> +	};
>  
> -		regulator@1 {
> -			compatible = "regulator-fixed";
> -			reg = <1>;
> -			regulator-name = "SATA0 power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> -		};
> -		regulator@2 {
> -			compatible = "regulator-fixed";
> -			reg = <2>;
> -			regulator-name = "SATA1 power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
> -		};
> +	regulator-2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA1 power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
>  	};
>  
>  	gpio-fan {
> diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
> index 5ee572dc9242..45d8ec5dfeb7 100644
> --- a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
> +++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
> @@ -32,17 +32,14 @@ sata@a0000 {
>  		};
>  	};
>  
> -	regulators {
> -		regulator@2 {
> -			compatible = "regulator-fixed";
> -			reg = <2>;
> -			regulator-name = "SATA1 power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
> -		};
> +	regulator-2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA1 power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
>  	};
>  };
> diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
> index 124a8ba279e3..054124857235 100644
> --- a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
> +++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
> @@ -53,32 +53,25 @@ usb@50000 {
>  		};
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> +	regulator-0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "USB Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
> +	};
>  
> -		regulator@0 {
> -			compatible = "regulator-fixed";
> -			reg = <0>;
> -			regulator-name = "USB Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
> -		};
> -		regulator@1 {
> -			compatible = "regulator-fixed";
> -			reg = <1>;
> -			regulator-name = "SATA0 power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> -		};
> +	regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA0 power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
>  	};
>  
>  	gpio-keys {
> diff --git a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
> index f0893cc06607..b07d11d1f124 100644
> --- a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
> +++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
> @@ -142,38 +142,32 @@ disk2-led-amber {
>  		};
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
> +	sata1_regulator: sata1-regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA1 Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <2000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&sata1_pwr_pin>;
>  		pinctrl-names = "default";
> +	};
>  
> -		sata1_regulator: sata1-regulator@1 {
> -			compatible = "regulator-fixed";
> -			reg = <1>;
> -			regulator-name = "SATA1 Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			startup-delay-us = <2000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> -		};
> -
> -		sata2_regulator: sata2-regulator@2 {
> -			compatible = "regulator-fixed";
> -			reg = <2>;
> -			regulator-name = "SATA2 Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			startup-delay-us = <4000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
> -		};
> +	sata2_regulator: sata2-regulator-2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA2 Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <4000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&sata2_pwr_pin>;
> +		pinctrl-names = "default";
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
> index 5551bac1962c..1b65059794bf 100644
> --- a/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
> +++ b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
> @@ -109,65 +109,60 @@ ethernet@74000 {
>  		};
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
> -			     &sata3_pwr_pin &sata4_pwr_pin>;
> +	sata1_regulator: sata1-regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA1 Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <2000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&sata1_pwr_pin>;
>  		pinctrl-names = "default";
> +	};
>  
> -		sata1_regulator: sata1-regulator@1 {
> -			compatible = "regulator-fixed";
> -			reg = <1>;
> -			regulator-name = "SATA1 Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			startup-delay-us = <2000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
> -		};
> +	sata2_regulator: sata2-regulator-2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA2 Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <4000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&sata2_pwr_pin>;
> +		pinctrl-names = "default";
> +	};
>  
> -		sata2_regulator: sata2-regulator@2 {
> -			compatible = "regulator-fixed";
> -			reg = <2>;
> -			regulator-name = "SATA2 Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			startup-delay-us = <4000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> -		};
> +	sata3_regulator: sata3-regulator-3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA3 Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <6000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&sata3_pwr_pin>;
> +		pinctrl-names = "default";
> +	};
>  
> -		sata3_regulator: sata3-regulator@3 {
> -			compatible = "regulator-fixed";
> -			reg = <3>;
> -			regulator-name = "SATA3 Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			startup-delay-us = <6000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> -		};
> -
> -		sata4_regulator: sata4-regulator@4 {
> -			compatible = "regulator-fixed";
> -			reg = <4>;
> -			regulator-name = "SATA4 Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			startup-delay-us = <8000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> -		};
> +	sata4_regulator: sata4-regulator-4 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "SATA4 Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <8000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&sata4_pwr_pin>;
> +		pinctrl-names = "default";
>  	};
>  };
>  
> -- 
> 2.34.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 2+ messages in thread
* Re: [PATCH 2/2] ARM: dts: marvell: dove: drop incorrect reg in fixed regulators
       [not found] ` <20230726070254.103661-2-krzysztof.kozlowski@linaro.org>
@ 2023-08-12 15:06   ` Gregory CLEMENT
  0 siblings, 0 replies; 2+ messages in thread
From: Gregory CLEMENT @ 2023-08-12 15:06 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Andrew Lunn, Sebastian Hesselbarth,
	Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
	devicetree, linux-kernel
  Cc: Krzysztof Kozlowski

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:

> Fixed regulators are not in some bus and bindings do not allow a "reg"
> property.  Move them out of "regulators" node to top-level.
>
>   dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>  arch/arm/boot/dts/marvell/dove-cm-a510.dtsi | 18 +++++--------
>  arch/arm/boot/dts/marvell/dove-cubox.dts    | 29 ++++++++-------------
>  arch/arm/boot/dts/marvell/dove-d3plug.dts   | 29 ++++++++-------------
>  arch/arm/boot/dts/marvell/dove-sbc-a510.dts | 28 +++++++++-----------
>  4 files changed, 41 insertions(+), 63 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
> index 1082fdfbfe60..621cb145a8f6 100644
> --- a/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
> +++ b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
> @@ -108,18 +108,12 @@ led-system {
>  		};
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		wifi_power: regulator@1 {
> -			compatible = "regulator-fixed";
> -			regulator-name = "WiFi Power";
> -			regulator-min-microvolt = <3300000>;
> -			regulator-max-microvolt = <3300000>;
> -			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
> -		};
> +	wifi_power: regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "WiFi Power";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/marvell/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts
> index dbba0c8cdab1..bfde99486a87 100644
> --- a/arch/arm/boot/dts/marvell/dove-cubox.dts
> +++ b/arch/arm/boot/dts/marvell/dove-cubox.dts
> @@ -28,24 +28,17 @@ led-power {
>  		};
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		usb_power: regulator@1 {
> -			compatible = "regulator-fixed";
> -			reg = <1>;
> -			regulator-name = "USB Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio0 1 0>;
> -			pinctrl-0 = <&pmx_gpio_1>;
> -			pinctrl-names = "default";
> -		};
> +	usb_power: regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "USB Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio0 1 0>;
> +		pinctrl-0 = <&pmx_gpio_1>;
> +		pinctrl-names = "default";
>  	};
>  
>  	clocks {
> diff --git a/arch/arm/boot/dts/marvell/dove-d3plug.dts b/arch/arm/boot/dts/marvell/dove-d3plug.dts
> index 5aa5d4a7d51d..a451fd576990 100644
> --- a/arch/arm/boot/dts/marvell/dove-d3plug.dts
> +++ b/arch/arm/boot/dts/marvell/dove-d3plug.dts
> @@ -37,24 +37,17 @@ led-status {
>  		};
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		usb_power: regulator@1 {
> -			compatible = "regulator-fixed";
> -			reg = <1>;
> -			regulator-name = "USB Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			enable-active-high;
> -			regulator-always-on;
> -			regulator-boot-on;
> -			gpio = <&gpio0 8 0>;
> -			pinctrl-0 = <&pmx_gpio_8>;
> -			pinctrl-names = "default";
> -		};
> +	usb_power: regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "USB Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio0 8 0>;
> +		pinctrl-0 = <&pmx_gpio_8>;
> +		pinctrl-names = "default";
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/marvell/dove-sbc-a510.dts b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
> index df021f9b0117..8585ee5533bf 100644
> --- a/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
> +++ b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
> @@ -76,22 +76,20 @@ chosen {
>  		stdout-path = &uart0;
>  	};
>  
> -	regulators {
> -		usb0_power: regulator@2 {
> -			compatible = "regulator-fixed";
> -			regulator-name = "USB Power";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
> -		};
> +	usb0_power: regulator-2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "USB Power";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
> +	};
>  
> -		mmc_power: regulator@3 {
> -			compatible = "regulator-fixed";
> -			regulator-name = "MMC Power";
> -			regulator-min-microvolt = <3300000>;
> -			regulator-max-microvolt = <3300000>;
> -			gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
> -		};
> +	mmc_power: regulator-3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "MMC Power";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
>  	};
>  };
>  
> -- 
> 2.34.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-08-12 15:06 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <20230726070254.103661-1-krzysztof.kozlowski@linaro.org>
2023-08-12 15:05 ` [PATCH 1/2] ARM: dts: marvell: armada: drop incorrect reg in fixed regulators Gregory CLEMENT
     [not found] ` <20230726070254.103661-2-krzysztof.kozlowski@linaro.org>
2023-08-12 15:06   ` [PATCH 2/2] ARM: dts: marvell: dove: " Gregory CLEMENT

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox