[PATCH] clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock

[PATCH] clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock

[Icenowy Zheng]

In the user manual of A64 SoC, the bit 22 and 23 of pll-mipi control
register is called "LDO{1,2}_EN", and according to the BSP source code
from Allwinner , the LDOs are enabled during the clock's enabling
process.

The clock failed to generate output if the two LDOs are not enabled.

Add the two bits to the clock's gate bits, so that the LDOs are enabled
when the PLL is enabled.

Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
As PLL-MIPI is not used before 4.20~5.0, I decide not to target this patch
on stable/mainline kernels.

 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 5f80eb018014..f7d297368eb2 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -162,7 +162,7 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
 #define SUN50I_A64_PLL_MIPI_REG		0x040
 
 static struct ccu_nkm pll_mipi_clk = {
-	.enable		= BIT(31),
+	.enable		= BIT(31) | BIT(23) | BIT(22),
 	.lock		= BIT(28),
 	.n		= _SUNXI_CCU_MULT(8, 4),
 	.k		= _SUNXI_CCU_MULT_MIN(4, 2, 2),
-- 
2.18.0

[linux-sunxi] [PATCH] clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock

[Jagan Teki]

On Tuesday 02 October 2018 05:59 PM, Icenowy Zheng wrote:
> In the user manual of A64 SoC, the bit 22 and 23 of pll-mipi control
> register is called "LDO{1,2}_EN", and according to the BSP source code
> from Allwinner , the LDOs are enabled during the clock's enabling
> process.
> 
> The clock failed to generate output if the two LDOs are not enabled.
> 
> Add the two bits to the clock's gate bits, so that the LDOs are enabled
> when the PLL is enabled.
> 
> Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---

Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

[PATCH] clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock

[Maxime Ripard]

Hi!

On Tue, Oct 02, 2018 at 08:29:11PM +0800, Icenowy Zheng wrote:
> In the user manual of A64 SoC, the bit 22 and 23 of pll-mipi control
> register is called "LDO{1,2}_EN", and according to the BSP source code
> from Allwinner , the LDOs are enabled during the clock's enabling
> process.
> 
> The clock failed to generate output if the two LDOs are not enabled.
> 
> Add the two bits to the clock's gate bits, so that the LDOs are enabled
> when the PLL is enabled.
> 
> Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> As PLL-MIPI is not used before 4.20~5.0, I decide not to target this patch
> on stable/mainline kernels.
> 
>  drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> index 5f80eb018014..f7d297368eb2 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> @@ -162,7 +162,7 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
>  #define SUN50I_A64_PLL_MIPI_REG		0x040
>  
>  static struct ccu_nkm pll_mipi_clk = {
> -	.enable		= BIT(31),
> +	.enable		= BIT(31) | BIT(23) | BIT(22),

Adding a comment on why those are needed in addition to the enable bit
would be great :)

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com