* Re: [PATCH v3 00/10] update Facebook Bletchley BMC
[not found] <20220215163151.32252-1-potin.lai@quantatw.com>
@ 2022-02-16 5:01 ` Joel Stanley
2022-02-16 17:17 ` Patrick Williams
0 siblings, 1 reply; 2+ messages in thread
From: Joel Stanley @ 2022-02-16 5:01 UTC (permalink / raw)
To: Potin Lai
Cc: Rob Herring, Andrew Jeffery, Patrick Williams, devicetree,
Linux ARM, linux-aspeed, Linux Kernel Mailing List
On Tue, 15 Feb 2022 at 16:32, Potin Lai <potin.lai@quantatw.com> wrote:
>
> This patch series update Facebook Bletchley BMC devicetree base on EVT HW
> schematioc design, and rebase SLED numbering to 1-based for OpenBMC
> multi-host.
>
> - GPIO:
> - adding more gpio line names
> - include interrupt line in io expander for gpio interrupt monitoring
>
> - SPI flash:
> - adding dual flash BSM module support
> - switch to spi2-gpio on spi2 due to unstable signal issue
>
> - Hwmon Sensors:
> - adding INA230 sensors for monitoring
> - fix ADM1278 shunt-resistor
>
> - MDIO Bus: enable mido3 bus
>
> - RTC: switch to external battery-backed rtc
>
> - OpenBMC: 1-based SLED numbering
>
>
> LINK: [v2] https://lore.kernel.org/all/20220214042538.12132-1-potin.lai@quantatw.com/
> LINK: [v1] https://lore.kernel.org/all/20220211014347.24841-1-potin.lai@quantatw.com/
>
>
> Changes v2 --> v3:
> - update patch name prefix
> - Disable spi2, and create a new node call spi2_gpio
Thanks, the patches look good.
Reviewed-by: Joel Stanley <joel@jms.id.au>
and given the minor differences from v2, lets add Patrick's review:
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
I've applied these for submission in the v5.18 merge window, and to
the openbmc tree.
>
> Changes v1 --> v2:
> - update the details of new added gpio line names in commit message
> - add battery-backed rtc information in comment and commit message
>
>
> Potin Lai (10):
> ARM: dts: aspeed: bletchley: switch sled numbering to 1-based
> ARM: dts: aspeed: bletchley: separate leds into multiple groups
> ARM: dts: aspeed: bletchley: update gpio-line-names
> ARM: dts: aspeed: bletchley: update fmc configurations
> ARM: dts: aspeed: bletchley: switch to spi-gpio for spi2
> ARM: dts: aspeed: bletchley: add interrupt support for sled io
> expander
> ARM: dts: aspeed: bletchley: add shunt-resistor for ADM1278
> ARM: dts: aspeed: bletchley: add INA230 sensor on each sled
> ARM: dts: aspeed: bletchley: enable mdio3 bus
> ARM: dts: aspeed: bletchley: cleanup redundant nodes
>
> .../dts/aspeed-bmc-facebook-bletchley.dts | 320 +++++++++++-------
> 1 file changed, 202 insertions(+), 118 deletions(-)
>
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread