[PATCH v2 0/3] dmaengine: fsl-edma: add error irq to help debug problem

[PATCH v2 0/3] dmaengine: fsl-edma: add error irq to help debug problem

[Frank Li]

Change binding to support optional error irq.
Add error irq handle for fsl-edma drivers.
imx93 dts add dma error irq interupt.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v2:
- Rebase to v6.15-rc1, fix conflict at fsl-edma-main.c
- Link to v1: https://lore.kernel.org/r/20250228-edma_err-v1-0-d1869fe4163e@nxp.com

---
Joy Zou (3):
      dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
      dmaegnine: fsl-edma: add edma error interrupt handler
      arm64: dtsi: imx93: add edma error interrupt support

 .../devicetree/bindings/dma/fsl,edma.yaml          |   4 +-
 arch/arm64/boot/dts/freescale/imx93.dtsi           |   6 +-
 drivers/dma/fsl-edma-common.c                      |  30 ++++--
 drivers/dma/fsl-edma-common.h                      |  18 ++++
 drivers/dma/fsl-edma-main.c                        | 114 ++++++++++++++++++++-
 5 files changed, 155 insertions(+), 17 deletions(-)
---
base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8
change-id: 20250225-edma_err-5a7385e45800

Best regards,
---
Frank Li <Frank.Li@nxp.com>

[PATCH v2 1/3] dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names

[Frank Li]

From: Joy Zou <joy.zou@nxp.com>

The edma controller support optional error interrupt, so update interrupts
and interrupt-names's maxItems.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl,edma.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index 950e8fa4f4ab4..fa4248e2f1b9c 100644
--- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -48,11 +48,11 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 64
+    maxItems: 65
 
   interrupt-names:
     minItems: 1
-    maxItems: 64
+    maxItems: 65
 
   "#dma-cells":
     description: |

-- 
2.34.1

[PATCH v2 2/3] dmaegnine: fsl-edma: add edma error interrupt handler

[Frank Li]

From: Joy Zou <joy.zou@nxp.com>

Add the edma error interrupt handler because it's useful to debug issue.

i.MX8ULP edma has per channel error interrupt.

i.MX91/93/95 and i.MX8QM/QXP/DXL edma share one error interrupt.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/dma/fsl-edma-common.c |  30 ++++++++---
 drivers/dma/fsl-edma-common.h |  18 +++++++
 drivers/dma/fsl-edma-main.c   | 114 ++++++++++++++++++++++++++++++++++++++++--
 3 files changed, 149 insertions(+), 13 deletions(-)

diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index 443b2430466cb..4976d7dde0809 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -95,7 +95,7 @@ static void fsl_edma3_enable_request(struct fsl_edma_chan *fsl_chan)
 	}
 
 	val = edma_readl_chreg(fsl_chan, ch_csr);
-	val |= EDMA_V3_CH_CSR_ERQ;
+	val |= EDMA_V3_CH_CSR_ERQ | EDMA_V3_CH_CSR_EEI;
 	edma_writel_chreg(fsl_chan, val, ch_csr);
 }
 
@@ -821,7 +821,7 @@ void fsl_edma_issue_pending(struct dma_chan *chan)
 int fsl_edma_alloc_chan_resources(struct dma_chan *chan)
 {
 	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-	int ret;
+	int ret = 0;
 
 	if (fsl_edma_drvflags(fsl_chan) & FSL_EDMA_DRV_HAS_CHCLK)
 		clk_prepare_enable(fsl_chan->clk);
@@ -831,17 +831,29 @@ int fsl_edma_alloc_chan_resources(struct dma_chan *chan)
 				sizeof(struct fsl_edma_hw_tcd64) : sizeof(struct fsl_edma_hw_tcd),
 				32, 0);
 
-	if (fsl_chan->txirq) {
+	if (fsl_chan->txirq)
 		ret = request_irq(fsl_chan->txirq, fsl_chan->irq_handler, IRQF_SHARED,
 				 fsl_chan->chan_name, fsl_chan);
 
-		if (ret) {
-			dma_pool_destroy(fsl_chan->tcd_pool);
-			return ret;
-		}
-	}
+	if (ret)
+		goto err_txirq;
+
+	if (fsl_chan->errirq > 0)
+		ret = request_irq(fsl_chan->errirq, fsl_chan->errirq_handler, IRQF_SHARED,
+				  fsl_chan->errirq_name, fsl_chan);
+
+	if (ret)
+		goto err_errirq;
 
 	return 0;
+
+err_errirq:
+	if (fsl_chan->txirq)
+		free_irq(fsl_chan->txirq, fsl_chan);
+err_txirq:
+	dma_pool_destroy(fsl_chan->tcd_pool);
+
+	return ret;
 }
 
 void fsl_edma_free_chan_resources(struct dma_chan *chan)
@@ -862,6 +874,8 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan)
 
 	if (fsl_chan->txirq)
 		free_irq(fsl_chan->txirq, fsl_chan);
+	if (fsl_chan->errirq)
+		free_irq(fsl_chan->errirq, fsl_chan);
 
 	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
 	dma_pool_destroy(fsl_chan->tcd_pool);
diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
index 10a5565ddfd76..205a964890948 100644
--- a/drivers/dma/fsl-edma-common.h
+++ b/drivers/dma/fsl-edma-common.h
@@ -71,6 +71,18 @@
 #define EDMA_V3_CH_ES_ERR          BIT(31)
 #define EDMA_V3_MP_ES_VLD          BIT(31)
 
+#define EDMA_V3_CH_ERR_DBE	BIT(0)
+#define EDMA_V3_CH_ERR_SBE	BIT(1)
+#define EDMA_V3_CH_ERR_SGE	BIT(2)
+#define EDMA_V3_CH_ERR_NCE	BIT(3)
+#define EDMA_V3_CH_ERR_DOE	BIT(4)
+#define EDMA_V3_CH_ERR_DAE	BIT(5)
+#define EDMA_V3_CH_ERR_SOE	BIT(6)
+#define EDMA_V3_CH_ERR_SAE	BIT(7)
+#define EDMA_V3_CH_ERR_ECX	BIT(8)
+#define EDMA_V3_CH_ERR_UCE	BIT(9)
+#define EDMA_V3_CH_ERR		BIT(31)
+
 enum fsl_edma_pm_state {
 	RUNNING = 0,
 	SUSPENDED,
@@ -162,6 +174,7 @@ struct fsl_edma_chan {
 	u32				dma_dev_size;
 	enum dma_data_direction		dma_dir;
 	char				chan_name[32];
+	char				errirq_name[36];
 	void __iomem			*tcd;
 	void __iomem			*mux_addr;
 	u32				real_count;
@@ -174,7 +187,9 @@ struct fsl_edma_chan {
 	int                             priority;
 	int				hw_chanid;
 	int				txirq;
+	int				errirq;
 	irqreturn_t			(*irq_handler)(int irq, void *dev_id);
+	irqreturn_t			(*errirq_handler)(int irq, void *dev_id);
 	bool				is_rxchan;
 	bool				is_remote;
 	bool				is_multi_fifo;
@@ -208,6 +223,9 @@ struct fsl_edma_desc {
 /* Need clean CHn_CSR DONE before enable TCD's MAJORELINK */
 #define FSL_EDMA_DRV_CLEAR_DONE_E_LINK	BIT(14)
 #define FSL_EDMA_DRV_TCD64		BIT(15)
+/* All channel ERR IRQ share one IRQ line */
+#define FSL_EDMA_DRV_ERRIRQ_SHARE       BIT(16)
+
 
 #define FSL_EDMA_DRV_EDMA3	(FSL_EDMA_DRV_SPLIT_REG |	\
 				 FSL_EDMA_DRV_BUS_8BYTE |	\
diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
index 756d67325db52..32a52a6acd60b 100644
--- a/drivers/dma/fsl-edma-main.c
+++ b/drivers/dma/fsl-edma-main.c
@@ -50,6 +50,83 @@ static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void fsl_edma3_err_check(struct fsl_edma_chan *fsl_chan)
+{
+	unsigned int ch_err;
+	u32 val;
+
+	scoped_guard(spinlock, &fsl_chan->vchan.lock) {
+		ch_err = edma_readl_chreg(fsl_chan, ch_es);
+		if (!(ch_err & EDMA_V3_CH_ERR))
+			return;
+
+		edma_writel_chreg(fsl_chan, EDMA_V3_CH_ERR, ch_es);
+		val = edma_readl_chreg(fsl_chan, ch_csr);
+		val &= ~EDMA_V3_CH_CSR_ERQ;
+		edma_writel_chreg(fsl_chan, val, ch_csr);
+	}
+
+	/* Ignore this interrupt since channel has been disabled already */
+	if (!fsl_chan->edesc)
+		return;
+
+	if (ch_err & EDMA_V3_CH_ERR_DBE)
+		dev_err(&fsl_chan->pdev->dev, "Destination Bus Error interrupt.\n");
+
+	if (ch_err & EDMA_V3_CH_ERR_SBE)
+		dev_err(&fsl_chan->pdev->dev, "Source Bus Error interrupt.\n");
+
+	if (ch_err & EDMA_V3_CH_ERR_SGE)
+		dev_err(&fsl_chan->pdev->dev, "Scatter/Gather Configuration Error interrupt.\n");
+
+	if (ch_err & EDMA_V3_CH_ERR_NCE)
+		dev_err(&fsl_chan->pdev->dev, "NBYTES/CITER Configuration Error interrupt.\n");
+
+	if (ch_err & EDMA_V3_CH_ERR_DOE)
+		dev_err(&fsl_chan->pdev->dev, "Destination Offset Error interrupt.\n");
+
+	if (ch_err & EDMA_V3_CH_ERR_DAE)
+		dev_err(&fsl_chan->pdev->dev, "Destination Address Error interrupt.\n");
+
+	if (ch_err & EDMA_V3_CH_ERR_SOE)
+		dev_err(&fsl_chan->pdev->dev, "Source Offset Error interrupt.\n");
+
+	if (ch_err & EDMA_V3_CH_ERR_SAE)
+		dev_err(&fsl_chan->pdev->dev, "Source Address Error interrupt.\n");
+
+	if (ch_err & EDMA_V3_CH_ERR_ECX)
+		dev_err(&fsl_chan->pdev->dev, "Transfer Canceled interrupt.\n");
+
+	if (ch_err & EDMA_V3_CH_ERR_UCE)
+		dev_err(&fsl_chan->pdev->dev, "Uncorrectable TCD error during channel execution interrupt.\n");
+
+	fsl_chan->status = DMA_ERROR;
+}
+
+static irqreturn_t fsl_edma3_err_handler_per_chan(int irq, void *dev_id)
+{
+	struct fsl_edma_chan *fsl_chan = dev_id;
+
+	fsl_edma3_err_check(fsl_chan);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t fsl_edma3_err_handler_shared(int irq, void *dev_id)
+{
+	struct fsl_edma_engine *fsl_edma = dev_id;
+	unsigned int ch;
+
+	for (ch = 0; ch < fsl_edma->n_chans; ch++) {
+		if (fsl_edma->chan_masked & BIT(ch))
+			continue;
+
+		fsl_edma3_err_check(&fsl_edma->chans[ch]);
+	}
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t fsl_edma3_tx_handler(int irq, void *dev_id)
 {
 	struct fsl_edma_chan *fsl_chan = dev_id;
@@ -309,7 +386,8 @@ fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma
 
 static int fsl_edma3_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
 {
-	int i;
+	char *errirq_name;
+	int i, ret;
 
 	for (i = 0; i < fsl_edma->n_chans; i++) {
 
@@ -324,6 +402,27 @@ static int fsl_edma3_irq_init(struct platform_device *pdev, struct fsl_edma_engi
 			return  -EINVAL;
 
 		fsl_chan->irq_handler = fsl_edma3_tx_handler;
+
+		if (!(fsl_edma->drvdata->flags & FSL_EDMA_DRV_ERRIRQ_SHARE)) {
+			fsl_chan->errirq = fsl_chan->txirq;
+			fsl_chan->errirq_handler = fsl_edma3_err_handler_per_chan;
+		}
+	}
+
+	/* All channel err use one irq number */
+	if (fsl_edma->drvdata->flags & FSL_EDMA_DRV_ERRIRQ_SHARE) {
+		/* last one is error irq */
+		fsl_edma->errirq = platform_get_irq_optional(pdev, fsl_edma->n_chans);
+		if (fsl_edma->errirq < 0)
+			return 0; /* dts miss err irq, treat as no err irq case */
+
+		errirq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-err",
+					     dev_name(&pdev->dev));
+
+		ret = devm_request_irq(&pdev->dev, fsl_edma->errirq, fsl_edma3_err_handler_shared,
+				       0, errirq_name, fsl_edma);
+		if (ret)
+			return dev_err_probe(&pdev->dev, ret, "Can't register eDMA err IRQ.\n");
 	}
 
 	return 0;
@@ -464,7 +563,8 @@ static struct fsl_edma_drvdata imx7ulp_data = {
 };
 
 static struct fsl_edma_drvdata imx8qm_data = {
-	.flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3 | FSL_EDMA_DRV_MEM_REMOTE,
+	.flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3 | FSL_EDMA_DRV_MEM_REMOTE
+		 | FSL_EDMA_DRV_ERRIRQ_SHARE,
 	.chreg_space_sz = 0x10000,
 	.chreg_off = 0x10000,
 	.setup_irq = fsl_edma3_irq_init,
@@ -481,14 +581,15 @@ static struct fsl_edma_drvdata imx8ulp_data = {
 };
 
 static struct fsl_edma_drvdata imx93_data3 = {
-	.flags = FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA3,
+	.flags = FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA3 | FSL_EDMA_DRV_ERRIRQ_SHARE,
 	.chreg_space_sz = 0x10000,
 	.chreg_off = 0x10000,
 	.setup_irq = fsl_edma3_irq_init,
 };
 
 static struct fsl_edma_drvdata imx93_data4 = {
-	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA4,
+	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA4
+		 | FSL_EDMA_DRV_ERRIRQ_SHARE,
 	.chreg_space_sz = 0x8000,
 	.chreg_off = 0x10000,
 	.mux_off = 0x10000 + offsetof(struct fsl_edma3_ch_reg, ch_mux),
@@ -498,7 +599,7 @@ static struct fsl_edma_drvdata imx93_data4 = {
 
 static struct fsl_edma_drvdata imx95_data5 = {
 	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA4 |
-		 FSL_EDMA_DRV_TCD64,
+		 FSL_EDMA_DRV_TCD64 | FSL_EDMA_DRV_ERRIRQ_SHARE,
 	.chreg_space_sz = 0x8000,
 	.chreg_off = 0x10000,
 	.mux_off = 0x200,
@@ -700,6 +801,9 @@ static int fsl_edma_probe(struct platform_device *pdev)
 		snprintf(fsl_chan->chan_name, sizeof(fsl_chan->chan_name), "%s-CH%02d",
 							   dev_name(&pdev->dev), i);
 
+		snprintf(fsl_chan->errirq_name, sizeof(fsl_chan->errirq_name),
+			 "%s-CH%02d-err", dev_name(&pdev->dev), i);
+
 		fsl_chan->edma = fsl_edma;
 		fsl_chan->pm_state = RUNNING;
 		fsl_chan->srcid = 0;

-- 
2.34.1

[PATCH v2 3/3] arm64: dtsi: imx93: add edma error interrupt support

[Frank Li]

From: Joy Zou <joy.zou@nxp.com>

Add edma error irq for imx93.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 64cd0776b43d3..9f6ac3c8f9455 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -297,7 +297,8 @@ edma1: dma-controller@44000000 {
 					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
 					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
 					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
-					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1
+					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
+					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;  // err
 				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
 				clock-names = "dma";
 			};
@@ -667,7 +668,8 @@ edma2: dma-controller@42000000 {
 					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
 				clock-names = "dma";
 			};

-- 
2.34.1

Re: [PATCH v2 1/3] dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names

[Rob Herring (Arm)]

On Mon, 07 Apr 2025 12:46:35 -0400, Frank Li wrote:
> From: Joy Zou <joy.zou@nxp.com>
> 
> The edma controller support optional error interrupt, so update interrupts
> and interrupt-names's maxItems.
> 
> Signed-off-by: Joy Zou <joy.zou@nxp.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl,edma.yaml | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 


Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.

Missing tags:

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH v2 3/3] arm64: dtsi: imx93: add edma error interrupt support

[Alberto Merciai]

On Mon, Apr 07, 2025 at 12:46:37PM -0400, Frank Li wrote:
> From: Joy Zou <joy.zou@nxp.com>
> 
> Add edma error irq for imx93.
> 
> Signed-off-by: Joy Zou <joy.zou@nxp.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index 64cd0776b43d3..9f6ac3c8f9455 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -297,7 +297,8 @@ edma1: dma-controller@44000000 {
>  					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
>  					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
>  					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
> -					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1
> +					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
> +					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;  // err
>  				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
>  				clock-names = "dma";
>  			};
> @@ -667,7 +668,8 @@ edma2: dma-controller@42000000 {
>  					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
>  					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
>  					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> -					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
> +					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
>  				clock-names = "dma";
>  			};
> 
> -- 
> 2.34.1
> 
> 
Reviewed-by: Alberto Merciai <alb3rt0.m3rciai@gmail.com>
Tested-by: Alberto Merciai <alb3rt0.m3rciai@gmail.com>

Re: (subset) [PATCH v2 0/3] dmaengine: fsl-edma: add error irq to help debug problem

[Vinod Koul]

On Mon, 07 Apr 2025 12:46:34 -0400, Frank Li wrote:
> Change binding to support optional error irq.
> Add error irq handle for fsl-edma drivers.
> imx93 dts add dma error irq interupt.
> 
> 

Applied, thanks!

[1/3] dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
      commit: a9ea01f28408169431dd3e6464ed2e48539f4280
[2/3] dmaegnine: fsl-edma: add edma error interrupt handler
      commit: d175222f5e90b7e1f23713378823c338fabb3258

Best regards,
-- 
~Vinod