From: Frank Li <Frank.li@nxp.com>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: l.stach@pengutronix.de, lpieralisi@kernel.org, kw@linux.com,
manivannan.sadhasivam@linaro.org, robh@kernel.org,
bhelgaas@google.com, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
imx@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 4/6] PCI: imx6: Let i.MX95 PCIe compliance with 8GT/s Receiver Impedance ECN
Date: Wed, 26 Mar 2025 10:39:35 -0400 [thread overview]
Message-ID: <Z+QRp3v/DW0CbVD/@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20250326075915.4073725-5-hongxing.zhu@nxp.com>
On Wed, Mar 26, 2025 at 03:59:13PM +0800, Richard Zhu wrote:
> ERR051586: Compliance with 8GT/s Receiver Impedance ECN.
>
> The default value of GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] is 1 which
> makes receiver non-compliant with the ZRX-DC parameter for 2.5 GT/s when
> operating at 8 GT/s or higher. It causes unnecessary timeout in L1.
>
> Workaround: Program GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] to 0.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 33 +++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index fbab5a4621aa..42683d6be9f2 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1261,6 +1261,37 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
> regulator_disable(imx_pcie->vpcie);
> }
>
> +static void imx_pcie_host_post_init(struct dw_pcie_rp *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct imx_pcie *imx_pcie = to_imx_pcie(pci);
> + u32 val;
> +
> + switch (imx_pcie->drvdata->variant) {
> + case IMX95:
> + case IMX95_EP:
Use quirk flags
if (imx_pcie->drvdata->flags & IMX6_8GT_ECN_51586 ) {
...
}
Frank
> + /*
> + * ERR051586: Compliance with 8GT/s Receiver Impedance ECN
> + *
> + * The default value of GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL]
> + * is 1 which makes receiver non-compliant with the ZRX-DC
> + * parameter for 2.5 GT/s when operating at 8 GT/s or higher.
> + * It causes unnecessary timeout in L1.
> + *
> + * Workaround: Program GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL]
> + * to 0.
> + */
> + dw_pcie_dbi_ro_wr_en(pci);
> + val = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
> + val &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
> + dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val);
> + dw_pcie_dbi_ro_wr_dis(pci);
> + break;
> + default:
> + break;
> + }
> +}
> +
> static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
> {
> struct imx_pcie *imx_pcie = to_imx_pcie(pcie);
> @@ -1302,6 +1333,7 @@ static const struct dw_pcie_host_ops imx_pcie_host_ops = {
> static const struct dw_pcie_host_ops imx_pcie_host_dw_pme_ops = {
> .init = imx_pcie_host_init,
> .deinit = imx_pcie_host_exit,
> + .post_init = imx_pcie_host_post_init,
> };
>
> static const struct dw_pcie_ops dw_pcie_ops = {
> @@ -1401,6 +1433,7 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie,
> struct device *dev = pci->dev;
>
> imx_pcie_host_init(pp);
> + imx_pcie_host_post_init(pp);
> ep = &pci->ep;
> ep->ops = &pcie_ep_ops;
>
> --
> 2.37.1
>
next prev parent reply other threads:[~2025-03-26 14:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-26 7:59 [PATCH v2 0/6] Add some enhancements for i.MX95 PCIe Richard Zhu
2025-03-26 7:59 ` [PATCH v2 1/6] PCI: imx6: Start link directly when workaround is not required Richard Zhu
2025-03-26 14:28 ` Frank Li
2025-03-26 7:59 ` [PATCH v2 2/6] PCI: imx6: Toggle the cold reset for i.MX95 PCIe Richard Zhu
2025-03-26 14:31 ` Frank Li
2025-03-26 7:59 ` [PATCH v2 3/6] PCI: imx6: Workaround i.MX95 PCIe may not exit L23 ready Richard Zhu
2025-03-26 14:34 ` Frank Li
2025-03-26 7:59 ` [PATCH v2 4/6] PCI: imx6: Let i.MX95 PCIe compliance with 8GT/s Receiver Impedance ECN Richard Zhu
2025-03-26 14:39 ` Frank Li [this message]
2025-03-26 7:59 ` [PATCH v2 5/6] PCI: imx6: Add PLL clock lock check for i.MX95 PCIe Richard Zhu
2025-03-26 14:42 ` Frank Li
2025-03-26 7:59 ` [PATCH v2 6/6] PCI: imx6: Save and restore the LUT setting " Richard Zhu
2025-03-26 15:00 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z+QRp3v/DW0CbVD/@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox