public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
* [PATCH -next v3] I2C: Make return value check more accurate and explicit for devm_pinctrl_get()
@ 2023-08-21  3:29 Jinjie Ruan
  2023-08-24  8:34 ` Oleksij Rempel
  2023-08-25 21:07 ` Wolfram Sang
  0 siblings, 2 replies; 4+ messages in thread
From: Jinjie Ruan @ 2023-08-21  3:29 UTC (permalink / raw)
  To: linux-i2c, linux-arm-kernel, linux, linus.walleij,
	Codrin Ciubotariu, Andi Shyti, Nicolas Ferre, Alexandre Belloni,
	Claudiu Beznea, Oleksij Rempel, Pengutronix Kernel Team,
	Shawn Guo, Sascha Hauer, Fabio Estevam, NXP Linux Team
  Cc: ruanjinjie

If pinctrl is not available (thus devm_pinctrl_get() returns NULL) then
recovery can't work, because we can't switch the I2C pins between the
I2C controller and GPIO. So, it is quite correct to print
"can't get pinctrl, bus recovery not supported" because the I2C bus
can't be recovered without pinctrl.

The PTR_ERR() is also fine - because if pinctrl is not present and
returns NULL, we'll end up returning zero, which is exactly what we
want.

However, open code that with a more accurate message will be more explicit
for NULL case when CONFIG_PINCTRL is not defined.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
---
v3:
- Split into two if() statements instead of removing the NULL checks.
- Remove the fix tags.
- Update the commit title and message.
- Update to bring the author's name before.
v2:
- Remove NULL check instead of using IS_ERR_OR_NULL() to avoid leaving them behind.
- Update the commit title and message.
---
 drivers/i2c/busses/i2c-at91-master.c | 6 +++++-
 drivers/i2c/busses/i2c-imx.c         | 6 +++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index 94cff1cd527e..d311981d3e60 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -831,7 +831,11 @@ static int at91_init_twi_recovery_gpio(struct platform_device *pdev,
 	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 
 	rinfo->pinctrl = devm_pinctrl_get(&pdev->dev);
-	if (!rinfo->pinctrl || IS_ERR(rinfo->pinctrl)) {
+	if (!rinfo->pinctrl) {
+		dev_info(dev->dev, "pinctrl unavailable, bus recovery not supported\n");
+		return 0;
+	}
+	if (IS_ERR(rinfo->pinctrl)) {
 		dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n");
 		return PTR_ERR(rinfo->pinctrl);
 	}
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 10e89586ca72..1775a79aeba2 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1388,7 +1388,11 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 	struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
 
 	i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
-	if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
+	if (!i2c_imx->pinctrl) {
+		dev_info(&pdev->dev, "pinctrl unavailable, bus recovery not supported\n");
+		return 0;
+	}
+	if (IS_ERR(i2c_imx->pinctrl)) {
 		dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
 		return PTR_ERR(i2c_imx->pinctrl);
 	}
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2023-08-25 21:08 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-08-21  3:29 [PATCH -next v3] I2C: Make return value check more accurate and explicit for devm_pinctrl_get() Jinjie Ruan
2023-08-24  8:34 ` Oleksij Rempel
2023-08-24 16:17   ` Andi Shyti
2023-08-25 21:07 ` Wolfram Sang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox