* Re: [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound
2022-07-12 7:50 [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound GUO Zihua
@ 2022-07-15 2:07 ` Guozihua (Scott)
2022-07-19 8:03 ` Guozihua (Scott)
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Guozihua (Scott) @ 2022-07-15 2:07 UTC (permalink / raw)
To: linux-crypto
Cc: linux-arm-kernel, herbert, davem, catalin.marinas, will, ebiggers
On 2022/7/12 15:50, GUO Zihua wrote:
> A kasan error was reported during fuzzing:
>
> BUG: KASAN: slab-out-of-bounds in neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
> Read of size 4 at addr ffff0010e293f010 by task syz-executor.5/1646715
> CPU: 4 PID: 1646715 Comm: syz-executor.5 Kdump: loaded Not tainted 5.10.0.aarch64 #1
> Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.59 01/31/2019
> Call trace:
> dump_backtrace+0x0/0x394
> show_stack+0x34/0x4c arch/arm64/kernel/stacktrace.c:196
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x158/0x1e4 lib/dump_stack.c:118
> print_address_description.constprop.0+0x68/0x204 mm/kasan/report.c:387
> __kasan_report+0xe0/0x140 mm/kasan/report.c:547
> kasan_report+0x44/0xe0 mm/kasan/report.c:564
> check_memory_region_inline mm/kasan/generic.c:187 [inline]
> __asan_load4+0x94/0xd0 mm/kasan/generic.c:252
> neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
> neon_poly1305_do_update+0x6c/0x15c [poly1305_neon]
> neon_poly1305_update+0x9c/0x1c4 [poly1305_neon]
> crypto_shash_update crypto/shash.c:131 [inline]
> shash_finup_unaligned+0x84/0x15c crypto/shash.c:179
> crypto_shash_finup+0x8c/0x140 crypto/shash.c:193
> shash_digest_unaligned+0xb8/0xe4 crypto/shash.c:201
> crypto_shash_digest+0xa4/0xfc crypto/shash.c:217
> crypto_shash_tfm_digest+0xb4/0x150 crypto/shash.c:229
> essiv_skcipher_setkey+0x164/0x200 [essiv]
> crypto_skcipher_setkey+0xb0/0x160 crypto/skcipher.c:612
> skcipher_setkey+0x3c/0x50 crypto/algif_skcipher.c:305
> alg_setkey+0x114/0x2a0 crypto/af_alg.c:220
> alg_setsockopt+0x19c/0x210 crypto/af_alg.c:253
> __sys_setsockopt+0x190/0x2e0 net/socket.c:2123
> __do_sys_setsockopt net/socket.c:2134 [inline]
> __se_sys_setsockopt net/socket.c:2131 [inline]
> __arm64_sys_setsockopt+0x78/0x94 net/socket.c:2131
> __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
> invoke_syscall+0x64/0x100 arch/arm64/kernel/syscall.c:48
> el0_svc_common.constprop.0+0x220/0x230 arch/arm64/kernel/syscall.c:155
> do_el0_svc+0xb4/0xd4 arch/arm64/kernel/syscall.c:217
> el0_svc+0x24/0x3c arch/arm64/kernel/entry-common.c:353
> el0_sync_handler+0x160/0x164 arch/arm64/kernel/entry-common.c:369
> el0_sync+0x160/0x180 arch/arm64/kernel/entry.S:683
>
> This error can be reproduced by the following code compiled as ko on a
> system with kasan enabled:
>
> char test_data[] = "\x00\x01\x02\x03\x04\x05\x06\x07"
> "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f"
> "\x10\x11\x12\x13\x14\x15\x16\x17"
> "\x18\x19\x1a\x1b\x1c\x1d\x1e";
>
> int init(void)
> {
> struct crypto_shash *tfm = NULL;
> struct shash_desc *desc = NULL;
> char *data = NULL;
>
> tfm = crypto_alloc_shash("poly1305", 0, 0);
> desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(tfm), GFP_KERNEL);
> desc->tfm = tfm;
>
> data = kmalloc(POLY1305_KEY_SIZE - 1, GFP_KERNEL);
> memcpy(data, test_data, POLY1305_KEY_SIZE - 1);
> crypto_shash_update(desc, data, POLY1305_KEY_SIZE - 1);
> crypto_shash_final(desc, data);
> kfree(data);
> return 0;
> }
>
> void deinit(void)
> {
> }
>
> module_init(init)
> module_exit(deinit)
> MODULE_LICENSE("GPL");
>
> The root cause of the bug sits in neon_poly1305_blocks. The logic
> neon_poly1305_blocks() performed is that if it was called with both s[]
> and r[] uninitialized, it will first try to initialize them with the
> data from the first "block" that it believed to be 32 bytes in length.
> First 16 bytes are used as the key and the next 16 bytes for s[]. This
> would lead to the aforementioned read out-of-bound. However, after
> calling poly1305_init_arch(), only 16 bytes were deducted from the input
> and s[] is initialized yet again with the following 16 bytes. The second
> initialization of s[] is certainly redundent which indicates that the
> first initialization should be for r[] only.
>
> This patch fixes the issue by calling poly1305_init_arm64() instead of
> poly1305_init_arch(). This is also the implementation for the same
> algorithm on arm platform.
>
> Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
> Cc: stable@vger.kernel.org
> Signed-off-by: GUO Zihua <guozihua@huawei.com>
> ---
> arch/arm64/crypto/poly1305-glue.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
> index 9c3d86e397bf..1fae18ba11ed 100644
> --- a/arch/arm64/crypto/poly1305-glue.c
> +++ b/arch/arm64/crypto/poly1305-glue.c
> @@ -52,7 +52,7 @@ static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
> {
> if (unlikely(!dctx->sset)) {
> if (!dctx->rset) {
> - poly1305_init_arch(dctx, src);
> + poly1305_init_arm64(&dctx->h, src);
> src += POLY1305_BLOCK_SIZE;
> len -= POLY1305_BLOCK_SIZE;
> dctx->rset = 1;
Friendly ping~
--
Best
GUO Zihua
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound
2022-07-12 7:50 [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound GUO Zihua
2022-07-15 2:07 ` Guozihua (Scott)
@ 2022-07-19 8:03 ` Guozihua (Scott)
2022-07-20 9:41 ` Will Deacon
2022-07-21 2:34 ` Eric Biggers
3 siblings, 0 replies; 9+ messages in thread
From: Guozihua (Scott) @ 2022-07-19 8:03 UTC (permalink / raw)
To: linux-crypto
Cc: linux-arm-kernel, herbert, davem, catalin.marinas, will, ebiggers,
ardb
On 2022/7/12 15:50, GUO Zihua wrote:
> A kasan error was reported during fuzzing:
>
> BUG: KASAN: slab-out-of-bounds in neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
> Read of size 4 at addr ffff0010e293f010 by task syz-executor.5/1646715
> CPU: 4 PID: 1646715 Comm: syz-executor.5 Kdump: loaded Not tainted 5.10.0.aarch64 #1
> Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.59 01/31/2019
> Call trace:
> dump_backtrace+0x0/0x394
> show_stack+0x34/0x4c arch/arm64/kernel/stacktrace.c:196
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x158/0x1e4 lib/dump_stack.c:118
> print_address_description.constprop.0+0x68/0x204 mm/kasan/report.c:387
> __kasan_report+0xe0/0x140 mm/kasan/report.c:547
> kasan_report+0x44/0xe0 mm/kasan/report.c:564
> check_memory_region_inline mm/kasan/generic.c:187 [inline]
> __asan_load4+0x94/0xd0 mm/kasan/generic.c:252
> neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
> neon_poly1305_do_update+0x6c/0x15c [poly1305_neon]
> neon_poly1305_update+0x9c/0x1c4 [poly1305_neon]
> crypto_shash_update crypto/shash.c:131 [inline]
> shash_finup_unaligned+0x84/0x15c crypto/shash.c:179
> crypto_shash_finup+0x8c/0x140 crypto/shash.c:193
> shash_digest_unaligned+0xb8/0xe4 crypto/shash.c:201
> crypto_shash_digest+0xa4/0xfc crypto/shash.c:217
> crypto_shash_tfm_digest+0xb4/0x150 crypto/shash.c:229
> essiv_skcipher_setkey+0x164/0x200 [essiv]
> crypto_skcipher_setkey+0xb0/0x160 crypto/skcipher.c:612
> skcipher_setkey+0x3c/0x50 crypto/algif_skcipher.c:305
> alg_setkey+0x114/0x2a0 crypto/af_alg.c:220
> alg_setsockopt+0x19c/0x210 crypto/af_alg.c:253
> __sys_setsockopt+0x190/0x2e0 net/socket.c:2123
> __do_sys_setsockopt net/socket.c:2134 [inline]
> __se_sys_setsockopt net/socket.c:2131 [inline]
> __arm64_sys_setsockopt+0x78/0x94 net/socket.c:2131
> __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
> invoke_syscall+0x64/0x100 arch/arm64/kernel/syscall.c:48
> el0_svc_common.constprop.0+0x220/0x230 arch/arm64/kernel/syscall.c:155
> do_el0_svc+0xb4/0xd4 arch/arm64/kernel/syscall.c:217
> el0_svc+0x24/0x3c arch/arm64/kernel/entry-common.c:353
> el0_sync_handler+0x160/0x164 arch/arm64/kernel/entry-common.c:369
> el0_sync+0x160/0x180 arch/arm64/kernel/entry.S:683
>
> This error can be reproduced by the following code compiled as ko on a
> system with kasan enabled:
>
> char test_data[] = "\x00\x01\x02\x03\x04\x05\x06\x07"
> "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f"
> "\x10\x11\x12\x13\x14\x15\x16\x17"
> "\x18\x19\x1a\x1b\x1c\x1d\x1e";
>
> int init(void)
> {
> struct crypto_shash *tfm = NULL;
> struct shash_desc *desc = NULL;
> char *data = NULL;
>
> tfm = crypto_alloc_shash("poly1305", 0, 0);
> desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(tfm), GFP_KERNEL);
> desc->tfm = tfm;
>
> data = kmalloc(POLY1305_KEY_SIZE - 1, GFP_KERNEL);
> memcpy(data, test_data, POLY1305_KEY_SIZE - 1);
> crypto_shash_update(desc, data, POLY1305_KEY_SIZE - 1);
> crypto_shash_final(desc, data);
> kfree(data);
> return 0;
> }
>
> void deinit(void)
> {
> }
>
> module_init(init)
> module_exit(deinit)
> MODULE_LICENSE("GPL");
>
> The root cause of the bug sits in neon_poly1305_blocks. The logic
> neon_poly1305_blocks() performed is that if it was called with both s[]
> and r[] uninitialized, it will first try to initialize them with the
> data from the first "block" that it believed to be 32 bytes in length.
> First 16 bytes are used as the key and the next 16 bytes for s[]. This
> would lead to the aforementioned read out-of-bound. However, after
> calling poly1305_init_arch(), only 16 bytes were deducted from the input
> and s[] is initialized yet again with the following 16 bytes. The second
> initialization of s[] is certainly redundent which indicates that the
> first initialization should be for r[] only.
>
> This patch fixes the issue by calling poly1305_init_arm64() instead of
> poly1305_init_arch(). This is also the implementation for the same
> algorithm on arm platform.
>
> Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
> Cc: stable@vger.kernel.org
> Signed-off-by: GUO Zihua <guozihua@huawei.com>
> ---
> arch/arm64/crypto/poly1305-glue.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
> index 9c3d86e397bf..1fae18ba11ed 100644
> --- a/arch/arm64/crypto/poly1305-glue.c
> +++ b/arch/arm64/crypto/poly1305-glue.c
> @@ -52,7 +52,7 @@ static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
> {
> if (unlikely(!dctx->sset)) {
> if (!dctx->rset) {
> - poly1305_init_arch(dctx, src);
> + poly1305_init_arm64(&dctx->h, src);
> src += POLY1305_BLOCK_SIZE;
> len -= POLY1305_BLOCK_SIZE;
> dctx->rset = 1;
Including Ard in the loop as they are the original uploader of this algo.
--
Best
GUO Zihua
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound
2022-07-12 7:50 [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound GUO Zihua
2022-07-15 2:07 ` Guozihua (Scott)
2022-07-19 8:03 ` Guozihua (Scott)
@ 2022-07-20 9:41 ` Will Deacon
2022-07-20 9:57 ` Guozihua (Scott)
2022-07-21 2:34 ` Eric Biggers
3 siblings, 1 reply; 9+ messages in thread
From: Will Deacon @ 2022-07-20 9:41 UTC (permalink / raw)
To: GUO Zihua
Cc: linux-crypto, linux-arm-kernel, herbert, davem, catalin.marinas,
ebiggers
On Tue, Jul 12, 2022 at 03:50:31PM +0800, GUO Zihua wrote:
> A kasan error was reported during fuzzing:
[...]
> This patch fixes the issue by calling poly1305_init_arm64() instead of
> poly1305_init_arch(). This is also the implementation for the same
> algorithm on arm platform.
>
> Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
> Cc: stable@vger.kernel.org
> Signed-off-by: GUO Zihua <guozihua@huawei.com>
> ---
> arch/arm64/crypto/poly1305-glue.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
I'm not a crypto guy by any stretch of the imagination, but Ard is out
at the moment and this looks like an important fix so I had a crack at
reviewing it.
> diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
> index 9c3d86e397bf..1fae18ba11ed 100644
> --- a/arch/arm64/crypto/poly1305-glue.c
> +++ b/arch/arm64/crypto/poly1305-glue.c
> @@ -52,7 +52,7 @@ static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
> {
> if (unlikely(!dctx->sset)) {
> if (!dctx->rset) {
> - poly1305_init_arch(dctx, src);
> + poly1305_init_arm64(&dctx->h, src);
> src += POLY1305_BLOCK_SIZE;
> len -= POLY1305_BLOCK_SIZE;
> dctx->rset = 1;
With this change, we no longer initialise dctx->buflen to 0 as part of the
initialisation. Looking at neon_poly1305_do_update(), I'm a bit worried
that we could land in the 'if (likely(len >= POLY1305_BLOCK_SIZE))' block,
end up with len == 0 and fail to set dctx->buflen. Is this a problem, or is
my ignorance showing?
Will
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound
2022-07-20 9:41 ` Will Deacon
@ 2022-07-20 9:57 ` Guozihua (Scott)
2022-07-21 2:37 ` Eric Biggers
0 siblings, 1 reply; 9+ messages in thread
From: Guozihua (Scott) @ 2022-07-20 9:57 UTC (permalink / raw)
To: Will Deacon
Cc: linux-crypto, linux-arm-kernel, herbert, davem, catalin.marinas,
ebiggers
On 2022/7/20 17:41, Will Deacon wrote:
> On Tue, Jul 12, 2022 at 03:50:31PM +0800, GUO Zihua wrote:
>> A kasan error was reported during fuzzing:
>
> [...]
>
>> This patch fixes the issue by calling poly1305_init_arm64() instead of
>> poly1305_init_arch(). This is also the implementation for the same
>> algorithm on arm platform.
>>
>> Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: GUO Zihua <guozihua@huawei.com>
>> ---
>> arch/arm64/crypto/poly1305-glue.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> I'm not a crypto guy by any stretch of the imagination, but Ard is out
> at the moment and this looks like an important fix so I had a crack at
> reviewing it.
>
>> diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
>> index 9c3d86e397bf..1fae18ba11ed 100644
>> --- a/arch/arm64/crypto/poly1305-glue.c
>> +++ b/arch/arm64/crypto/poly1305-glue.c
>> @@ -52,7 +52,7 @@ static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
>> {
>> if (unlikely(!dctx->sset)) {
>> if (!dctx->rset) {
>> - poly1305_init_arch(dctx, src);
>> + poly1305_init_arm64(&dctx->h, src);
>> src += POLY1305_BLOCK_SIZE;
>> len -= POLY1305_BLOCK_SIZE;
>> dctx->rset = 1;
>
> With this change, we no longer initialise dctx->buflen to 0 as part of the
> initialisation. Looking at neon_poly1305_do_update(), I'm a bit worried
> that we could land in the 'if (likely(len >= POLY1305_BLOCK_SIZE))' block,
> end up with len == 0 and fail to set dctx->buflen. Is this a problem, or is
> my ignorance showing?
>
> Will
> .
Thanks Will.
I noticed this as well, but I leaved it out so that the behavior is the
same as the implementation for arm. The buflen here seems to be used for
maintaining any excessive data after the last block, and is zeroed
during init. I am not sure why it should be zeroed again during key
initialization. Maybe the thought was that the very first block of the
data is always used for initializing rset and that is also considered to
be the "initialization" process for the algorithm, thus the zeroing of
buflen. I could be completely wrong though.
--
Best
GUO Zihua
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound
2022-07-20 9:57 ` Guozihua (Scott)
@ 2022-07-21 2:37 ` Eric Biggers
2022-07-21 9:28 ` Will Deacon
0 siblings, 1 reply; 9+ messages in thread
From: Eric Biggers @ 2022-07-21 2:37 UTC (permalink / raw)
To: Guozihua (Scott)
Cc: Will Deacon, linux-crypto, linux-arm-kernel, herbert, davem,
catalin.marinas
On Wed, Jul 20, 2022 at 05:57:30PM +0800, Guozihua (Scott) wrote:
> On 2022/7/20 17:41, Will Deacon wrote:
> > On Tue, Jul 12, 2022 at 03:50:31PM +0800, GUO Zihua wrote:
> > > A kasan error was reported during fuzzing:
> >
> > [...]
> >
> > > This patch fixes the issue by calling poly1305_init_arm64() instead of
> > > poly1305_init_arch(). This is also the implementation for the same
> > > algorithm on arm platform.
> > >
> > > Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
> > > Cc: stable@vger.kernel.org
> > > Signed-off-by: GUO Zihua <guozihua@huawei.com>
> > > ---
> > > arch/arm64/crypto/poly1305-glue.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > I'm not a crypto guy by any stretch of the imagination, but Ard is out
> > at the moment and this looks like an important fix so I had a crack at
> > reviewing it.
> >
> > > diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
> > > index 9c3d86e397bf..1fae18ba11ed 100644
> > > --- a/arch/arm64/crypto/poly1305-glue.c
> > > +++ b/arch/arm64/crypto/poly1305-glue.c
> > > @@ -52,7 +52,7 @@ static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
> > > {
> > > if (unlikely(!dctx->sset)) {
> > > if (!dctx->rset) {
> > > - poly1305_init_arch(dctx, src);
> > > + poly1305_init_arm64(&dctx->h, src);
> > > src += POLY1305_BLOCK_SIZE;
> > > len -= POLY1305_BLOCK_SIZE;
> > > dctx->rset = 1;
> >
> > With this change, we no longer initialise dctx->buflen to 0 as part of the
> > initialisation. Looking at neon_poly1305_do_update(), I'm a bit worried
> > that we could land in the 'if (likely(len >= POLY1305_BLOCK_SIZE))' block,
> > end up with len == 0 and fail to set dctx->buflen. Is this a problem, or is
> > my ignorance showing?
> >
> > Will
> > .
>
> Thanks Will.
>
> I noticed this as well, but I leaved it out so that the behavior is the same
> as the implementation for arm. The buflen here seems to be used for
> maintaining any excessive data after the last block, and is zeroed during
> init. I am not sure why it should be zeroed again during key initialization.
> Maybe the thought was that the very first block of the data is always used
> for initializing rset and that is also considered to be the "initialization"
> process for the algorithm, thus the zeroing of buflen. I could be completely
> wrong though.
>
buflen is initialized by neon_poly1305_init(), so there's no issue here.
- Eric
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound
2022-07-21 2:37 ` Eric Biggers
@ 2022-07-21 9:28 ` Will Deacon
2022-07-22 3:14 ` Guozihua (Scott)
0 siblings, 1 reply; 9+ messages in thread
From: Will Deacon @ 2022-07-21 9:28 UTC (permalink / raw)
To: Eric Biggers
Cc: Guozihua (Scott), linux-crypto, linux-arm-kernel, herbert, davem,
catalin.marinas
On Wed, Jul 20, 2022 at 07:37:17PM -0700, Eric Biggers wrote:
> On Wed, Jul 20, 2022 at 05:57:30PM +0800, Guozihua (Scott) wrote:
> > On 2022/7/20 17:41, Will Deacon wrote:
> > > On Tue, Jul 12, 2022 at 03:50:31PM +0800, GUO Zihua wrote:
> > > > A kasan error was reported during fuzzing:
> > >
> > > [...]
> > >
> > > > This patch fixes the issue by calling poly1305_init_arm64() instead of
> > > > poly1305_init_arch(). This is also the implementation for the same
> > > > algorithm on arm platform.
> > > >
> > > > Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
> > > > Cc: stable@vger.kernel.org
> > > > Signed-off-by: GUO Zihua <guozihua@huawei.com>
> > > > ---
> > > > arch/arm64/crypto/poly1305-glue.c | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > I'm not a crypto guy by any stretch of the imagination, but Ard is out
> > > at the moment and this looks like an important fix so I had a crack at
> > > reviewing it.
> > >
> > > > diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
> > > > index 9c3d86e397bf..1fae18ba11ed 100644
> > > > --- a/arch/arm64/crypto/poly1305-glue.c
> > > > +++ b/arch/arm64/crypto/poly1305-glue.c
> > > > @@ -52,7 +52,7 @@ static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
> > > > {
> > > > if (unlikely(!dctx->sset)) {
> > > > if (!dctx->rset) {
> > > > - poly1305_init_arch(dctx, src);
> > > > + poly1305_init_arm64(&dctx->h, src);
> > > > src += POLY1305_BLOCK_SIZE;
> > > > len -= POLY1305_BLOCK_SIZE;
> > > > dctx->rset = 1;
> > >
> > > With this change, we no longer initialise dctx->buflen to 0 as part of the
> > > initialisation. Looking at neon_poly1305_do_update(), I'm a bit worried
> > > that we could land in the 'if (likely(len >= POLY1305_BLOCK_SIZE))' block,
> > > end up with len == 0 and fail to set dctx->buflen. Is this a problem, or is
> > > my ignorance showing?
> > >
> > > Will
> > > .
> >
> > Thanks Will.
> >
> > I noticed this as well, but I leaved it out so that the behavior is the same
> > as the implementation for arm. The buflen here seems to be used for
> > maintaining any excessive data after the last block, and is zeroed during
> > init. I am not sure why it should be zeroed again during key initialization.
> > Maybe the thought was that the very first block of the data is always used
> > for initializing rset and that is also considered to be the "initialization"
> > process for the algorithm, thus the zeroing of buflen. I could be completely
> > wrong though.
> >
>
> buflen is initialized by neon_poly1305_init(), so there's no issue here.
Ah yes, thanks. I missed that. In which case, for the very little it's
worth:
Acked-by: Will Deacon <will@kernel.org>
Herbert, please can you pick this up?
Will
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound
2022-07-21 9:28 ` Will Deacon
@ 2022-07-22 3:14 ` Guozihua (Scott)
0 siblings, 0 replies; 9+ messages in thread
From: Guozihua (Scott) @ 2022-07-22 3:14 UTC (permalink / raw)
To: Will Deacon, Eric Biggers
Cc: linux-crypto, linux-arm-kernel, herbert, davem, catalin.marinas
On 2022/7/21 17:28, Will Deacon wrote:
> On Wed, Jul 20, 2022 at 07:37:17PM -0700, Eric Biggers wrote:
>> On Wed, Jul 20, 2022 at 05:57:30PM +0800, Guozihua (Scott) wrote:
>>> On 2022/7/20 17:41, Will Deacon wrote:
>>>> On Tue, Jul 12, 2022 at 03:50:31PM +0800, GUO Zihua wrote:
>>>>> A kasan error was reported during fuzzing:
>>>>
>>>> [...]
>>>>
>>>>> This patch fixes the issue by calling poly1305_init_arm64() instead of
>>>>> poly1305_init_arch(). This is also the implementation for the same
>>>>> algorithm on arm platform.
>>>>>
>>>>> Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
>>>>> Cc: stable@vger.kernel.org
>>>>> Signed-off-by: GUO Zihua <guozihua@huawei.com>
>>>>> ---
>>>>> arch/arm64/crypto/poly1305-glue.c | 2 +-
>>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> I'm not a crypto guy by any stretch of the imagination, but Ard is out
>>>> at the moment and this looks like an important fix so I had a crack at
>>>> reviewing it.
>>>>
>>>>> diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
>>>>> index 9c3d86e397bf..1fae18ba11ed 100644
>>>>> --- a/arch/arm64/crypto/poly1305-glue.c
>>>>> +++ b/arch/arm64/crypto/poly1305-glue.c
>>>>> @@ -52,7 +52,7 @@ static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
>>>>> {
>>>>> if (unlikely(!dctx->sset)) {
>>>>> if (!dctx->rset) {
>>>>> - poly1305_init_arch(dctx, src);
>>>>> + poly1305_init_arm64(&dctx->h, src);
>>>>> src += POLY1305_BLOCK_SIZE;
>>>>> len -= POLY1305_BLOCK_SIZE;
>>>>> dctx->rset = 1;
>>>>
>>>> With this change, we no longer initialise dctx->buflen to 0 as part of the
>>>> initialisation. Looking at neon_poly1305_do_update(), I'm a bit worried
>>>> that we could land in the 'if (likely(len >= POLY1305_BLOCK_SIZE))' block,
>>>> end up with len == 0 and fail to set dctx->buflen. Is this a problem, or is
>>>> my ignorance showing?
>>>>
>>>> Will
>>>> .
>>>
>>> Thanks Will.
>>>
>>> I noticed this as well, but I leaved it out so that the behavior is the same
>>> as the implementation for arm. The buflen here seems to be used for
>>> maintaining any excessive data after the last block, and is zeroed during
>>> init. I am not sure why it should be zeroed again during key initialization.
>>> Maybe the thought was that the very first block of the data is always used
>>> for initializing rset and that is also considered to be the "initialization"
>>> process for the algorithm, thus the zeroing of buflen. I could be completely
>>> wrong though.
>>>
>>
>> buflen is initialized by neon_poly1305_init(), so there's no issue here.
>
> Ah yes, thanks. I missed that. In which case, for the very little it's
> worth:
>
> Acked-by: Will Deacon <will@kernel.org>
>
> Herbert, please can you pick this up?
>
> Will
> .
Thanks Will.
Herbert, would you please wait for a v3 patch? I'll update the reproduce
example based on Eric's comment.
--
Best
GUO Zihua
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound
2022-07-12 7:50 [PATCH v2] arm64/crypto: poly1305 fix a read out-of-bound GUO Zihua
` (2 preceding siblings ...)
2022-07-20 9:41 ` Will Deacon
@ 2022-07-21 2:34 ` Eric Biggers
3 siblings, 0 replies; 9+ messages in thread
From: Eric Biggers @ 2022-07-21 2:34 UTC (permalink / raw)
To: GUO Zihua
Cc: linux-crypto, linux-arm-kernel, herbert, davem, catalin.marinas,
will
On Tue, Jul 12, 2022 at 03:50:31PM +0800, GUO Zihua wrote:
> int init(void)
> {
> struct crypto_shash *tfm = NULL;
> struct shash_desc *desc = NULL;
> char *data = NULL;
>
> tfm = crypto_alloc_shash("poly1305", 0, 0);
> desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(tfm), GFP_KERNEL);
> desc->tfm = tfm;
>
> data = kmalloc(POLY1305_KEY_SIZE - 1, GFP_KERNEL);
> memcpy(data, test_data, POLY1305_KEY_SIZE - 1);
> crypto_shash_update(desc, data, POLY1305_KEY_SIZE - 1);
> crypto_shash_final(desc, data);
> kfree(data);
> return 0;
> }
This isn't actually a valid test case since it never calls crypto_shash_init().
So the behavior of this test is undefined both before and after this patch. The
simplest way to write a correct test would be to use crypto_shash_tfm_digest().
Anyway, the bug is still real and this patch is still the correct fix, so it's
good enough to add my reviewed-by:
Reviewed-by: Eric Biggers <ebiggers@google.com>
- Eric
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread