Re: [PATCH v2 08/10] arm64: dts: imx943: Add display pipeline nodes

[Frank Li <Frank.li@nxp.com>]

On Wed, Jul 16, 2025 at 11:15:12AM +0300, Laurentiu Palcu wrote:
> Add display controller and LDB support in imx943.
>
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx943.dtsi | 56 ++++++++++++++++++++++-
>  1 file changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi b/arch/arm64/boot/dts/freescale/imx943.dtsi
> index 657c81b6016f2..db00a94812e18 100644
> --- a/arch/arm64/boot/dts/freescale/imx943.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx943.dtsi
> @@ -148,7 +148,7 @@ l3_cache: l3-cache {
>  		};
>  	};
>
> -	clock-ldb-pll-div7 {
> +	clock_ldb_pll_div7: clock-ldb-pll-div7 {
>  		compatible = "fixed-factor-clock";
>  		#clock-cells = <0>;
>  		clocks = <&scmi_clk IMX94_CLK_LDBPLL>;
> @@ -173,10 +173,64 @@ dispmix_csr: syscon@4b010000 {
>
>  		lvds_csr: syscon@4b0c0000 {
>  			compatible = "nxp,imx94-lvds-csr", "syscon";

Did you update nxp,imx94-lvds-csr's binding doc to allow add child node
ldb@4 ?

> +			#address-cells = <1>;
> +			#size-cells = <1>;
>  			reg = <0x0 0x4b0c0000 0x0 0x10000>;

reg should be second property. add address-cells after reg

>  			clocks = <&scmi_clk IMX94_CLK_DISPAPB>;
>  			#clock-cells = <1>;
>  			power-domains = <&scmi_devpd IMX94_PD_DISPLAY>;
> +
> +			ldb: ldb@4 {
> +				compatible = "fsl,imx94-ldb";
> +				#address-cells = <1>;
> +				#size-cells = <0>;

the same here.

Frank
> +				reg = <0x4 0x4>, <0x8 0x4>;
> +				reg-names = "ldb", "lvds";
> +				clocks = <&lvds_csr IMX94_CLK_DISPMIX_LVDS_CLK_GATE>;
> +				clock-names = "ldb";
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +
> +						lvds_in: endpoint {
> +							remote-endpoint = <&dcif_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +			};
> +		};
> +
> +		dcif: display-controller@4b120000 {
> +			compatible = "nxp,imx94-dcif";
> +			reg = <0x0 0x4b120000 0x0 0x300000>;
> +			interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "common", "bg_layer", "fg_layer";
> +			clocks = <&scmi_clk IMX94_CLK_DISPAPB>,
> +				 <&scmi_clk IMX94_CLK_DISPAXI>,
> +				 <&dispmix_csr IMX94_CLK_DISPMIX_CLK_SEL>;
> +			clock-names = "apb", "axi", "pix";
> +			assigned-clocks = <&dispmix_csr IMX94_CLK_DISPMIX_CLK_SEL>;
> +			assigned-clock-parents = <&clock_ldb_pll_div7>;
> +			power-domains = <&scmi_devpd IMX94_PD_DISPLAY>;
> +			nxp,blk-ctrl = <&dispmix_csr>;
> +			status = "disabled";
> +
> +			port {
> +				dcif_out: endpoint {
> +					remote-endpoint = <&lvds_in>;
> +				};
> +			};
>  		};
>  	};
>  };
> --
> 2.34.1
>