Re: [PATCH v2 02/10] clk: imx95-blk-ctl: Save/restore registers when RPM routines are called

[Frank Li <Frank.li@nxp.com>]

On Wed, Jul 16, 2025 at 11:15:06AM +0300, Laurentiu Palcu wrote:
> If runtime PM is used for the clock providers and they're part of a
> power domain, then the power domain supply will be cut off when runtime
> suspended. That means all BLK CTL registers belonging to that power
> domain will be reset. Save the registers, then, before entering suspend
> and restore them in resume.
>
> Also, fix the suspend/resume routines and make sure we disable/enable
> the clock correctly.
>
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> ---
>  drivers/clk/imx/clk-imx95-blk-ctl.c | 25 +++++++++++++------------
>  1 file changed, 13 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-imx95-blk-ctl.c b/drivers/clk/imx/clk-imx95-blk-ctl.c
> index c72debaf3a60b..3f6bcc33bbe99 100644
> --- a/drivers/clk/imx/clk-imx95-blk-ctl.c
> +++ b/drivers/clk/imx/clk-imx95-blk-ctl.c
> @@ -453,7 +453,9 @@ static int imx95_bc_runtime_suspend(struct device *dev)
>  {
>  	struct imx95_blk_ctl *bc = dev_get_drvdata(dev);
>
> +	bc->clk_reg_restore = readl(bc->base + bc->pdata->clk_reg_offset);
>  	clk_disable_unprepare(bc->clk_apb);
> +
>  	return 0;
>  }
>
> @@ -461,7 +463,10 @@ static int imx95_bc_runtime_resume(struct device *dev)
>  {
>  	struct imx95_blk_ctl *bc = dev_get_drvdata(dev);
>
> -	return clk_prepare_enable(bc->clk_apb);
> +	clk_prepare_enable(bc->clk_apb);

Need check clk_prepare_enable()'s return value!

> +	writel(bc->clk_reg_restore, bc->base + bc->pdata->clk_reg_offset);
> +
> +	return 0;
>  }
>  #endif
>
> @@ -469,17 +474,12 @@ static int imx95_bc_runtime_resume(struct device *dev)
>  static int imx95_bc_suspend(struct device *dev)
>  {
>  	struct imx95_blk_ctl *bc = dev_get_drvdata(dev);
> -	int ret;
>
> -	if (bc->pdata->rpm_enabled) {
> -		ret = pm_runtime_get_sync(bc->dev);
> -		if (ret < 0) {
> -			pm_runtime_put_noidle(bc->dev);
> -			return ret;
> -		}
> -	}
> +	if (pm_runtime_suspended(dev))
> +		return 0;
>
>  	bc->clk_reg_restore = readl(bc->base + bc->pdata->clk_reg_offset);
> +	clk_disable_unprepare(bc->clk_apb);
>
>  	return 0;
>  }
> @@ -488,10 +488,11 @@ static int imx95_bc_resume(struct device *dev)
>  {
>  	struct imx95_blk_ctl *bc = dev_get_drvdata(dev);
>
> -	writel(bc->clk_reg_restore, bc->base + bc->pdata->clk_reg_offset);
> +	if (pm_runtime_suspended(dev))
> +		return 0;
>
> -	if (bc->pdata->rpm_enabled)
> -		pm_runtime_put(bc->dev);
> +	clk_prepare_enable(bc->clk_apb);
> +	writel(bc->clk_reg_restore, bc->base + bc->pdata->clk_reg_offset);
>
>  	return 0;
>  }

Look like needn't imx95_bc_resume() and imx95_bc_suspend()

DEFINE_RUNTIME_DEV_PM_OPS() will use pm_runtime_force_suspend(), which
do similar things with above logic.

Frank


> --
> 2.34.1
>