Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Isaac Scott <isaac.scott@ideasonboard.com>
Cc: laurent.pinchart@ideasonboard.com, rmfrfs@gmail.com,
	martink@posteo.de, kernel@puri.sm, mchehab@kernel.org,
	shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com,
	linux-media@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, hverkuil@kernel.org,
	nicolas.dufresne@collabora.com, sakari.ailus@linux.intel.com,
	tomi.valkeinen@ideasonboard.com, jonas@kwiboo.se,
	dan.scally+renesas@ideasonboard.com, m.szyprowski@samsung.com,
	mehdi.djait@linux.intel.com,
	niklas.soderlund+renesas@ragnatech.se
Subject: Re: [PATCH v2 1/3] media: v4l: Add helper to get number of active lanes via a pad
Date: Wed, 3 Sep 2025 11:30:16 -0400	[thread overview]
Message-ID: <aLhfCFJGU7R9Uh+P@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20250903102243.1563527-2-isaac.scott@ideasonboard.com>

On Wed, Sep 03, 2025 at 11:22:40AM +0100, Isaac Scott wrote:
> Sometimes, users will not use all of the MIPI CSI 2 lanes available when
> connecting to the MIPI CSI receiver of their device. Add a helper
> function that checks the mbus_config for the device driver to allow
> users to define the number of active data lanes through the
> get_mbus_config op.
>
> If the driver does not implement this op, fall back to using the number
> of data lanes specified in device tree.
>
> Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
>  drivers/media/v4l2-core/v4l2-common.c | 25 +++++++++++++++++++++++++
>  include/media/v4l2-common.h           |  1 +
>  2 files changed, 26 insertions(+)
>
> diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> index 6e585bc76367..8683107b3704 100644
> --- a/drivers/media/v4l2-core/v4l2-common.c
> +++ b/drivers/media/v4l2-core/v4l2-common.c
> @@ -571,6 +571,31 @@ s64 __v4l2_get_link_freq_pad(struct media_pad *pad, unsigned int mul,
>  	return __v4l2_get_link_freq_ctrl(sd->ctrl_handler, mul, div);
>  }
>  EXPORT_SYMBOL_GPL(__v4l2_get_link_freq_pad);
> +
> +unsigned int v4l2_get_active_data_lanes(const struct media_pad *pad, unsigned int dt_lanes)
> +{
> +	struct v4l2_mbus_config mbus_config = {};
> +	struct v4l2_subdev *sd;
> +	unsigned int lanes;
> +	int ret;
> +
> +	sd = media_entity_to_v4l2_subdev(pad->entity);
> +	ret = v4l2_subdev_call(sd, pad, get_mbus_config, pad->index,
> +			       &mbus_config);
> +	if (ret < 0 && ret != -ENOIOCTLCMD)
> +		return ret;
> +
> +	if (!mbus_config.bus.mipi_csi2.num_data_lanes)
> +		return dt_lanes;
> +
> +	lanes = mbus_config.bus.mipi_csi2.num_data_lanes;
> +
> +	if (lanes < 0 || lanes > dt_lanes)
> +		return -EINVAL;
> +
> +	return lanes;
> +}
> +EXPORT_SYMBOL_GPL(v4l2_get_active_data_lanes);
>  #endif /* CONFIG_MEDIA_CONTROLLER */
>
>  /*
> diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
> index 0a43f56578bc..3f8937260c76 100644
> --- a/include/media/v4l2-common.h
> +++ b/include/media/v4l2-common.h
> @@ -584,6 +584,7 @@ int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt, u32 pixelformat,
>  	(pad, mul, div)
>  s64 __v4l2_get_link_freq_pad(struct media_pad *pad, unsigned int mul,
>  			     unsigned int div);
> +unsigned int v4l2_get_active_data_lanes(const struct media_pad *pad, unsigned int dt_lanes);
>  #else
>  #define v4l2_get_link_freq(handler, mul, div)		\
>  	__v4l2_get_link_freq_ctrl(handler, mul, div)
> --
> 2.43.0
>


  reply	other threads:[~2025-09-03 22:05 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-03 10:22 [PATCH v2 0/3] media: imx-mipi-csis: Get the number of active lanes from mbus_config Isaac Scott
2025-09-03 10:22 ` [PATCH v2 1/3] media: v4l: Add helper to get number of active lanes via a pad Isaac Scott
2025-09-03 15:30   ` Frank Li [this message]
2025-09-04  8:33   ` Niklas Söderlund
2025-09-04  8:44   ` Sakari Ailus
2025-09-04 15:07     ` Laurent Pinchart
2025-09-15  9:28     ` Isaac Scott
2025-09-03 10:22 ` [PATCH v2 2/3] media: imx-mipi-csis: Store the number of data_lanes configured in dt Isaac Scott
2025-09-03 15:33   ` Frank Li
2025-09-04 15:01     ` Laurent Pinchart
2025-09-15  9:24       ` Isaac Scott
2025-09-03 10:22 ` [PATCH v2 3/3] media: imx-mipi-csis: Get number of active lanes via mbus_config Isaac Scott
2025-09-03 15:35   ` Frank Li
2025-09-15  9:26     ` Isaac Scott

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aLhfCFJGU7R9Uh+P@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=dan.scally+renesas@ideasonboard.com \
    --cc=festevam@gmail.com \
    --cc=hverkuil@kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=isaac.scott@ideasonboard.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel@pengutronix.de \
    --cc=kernel@puri.sm \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=martink@posteo.de \
    --cc=mchehab@kernel.org \
    --cc=mehdi.djait@linux.intel.com \
    --cc=nicolas.dufresne@collabora.com \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=rmfrfs@gmail.com \
    --cc=s.hauer@pengutronix.de \
    --cc=sakari.ailus@linux.intel.com \
    --cc=shawnguo@kernel.org \
    --cc=tomi.valkeinen@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox