From: Frank Li <Frank.li@nxp.com>
To: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
Cc: Abel Vesa <abelvesa@kernel.org>, Peng Fan <peng.fan@nxp.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Daniel Baluta <daniel.baluta@nxp.com>,
Shengjiu Wang <shengjiu.wang@nxp.com>,
linux-clk@vger.kernel.org, imx@lists.linux.dev,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: Re: [PATCH v3 6/8] reset: imx8mp-audiomix: Extend the driver usage
Date: Wed, 29 Oct 2025 12:42:36 -0400 [thread overview]
Message-ID: <aQJD/I+fPNobYBAW@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20251029135229.890-7-laurentiumihalcea111@gmail.com>
On Wed, Oct 29, 2025 at 06:52:27AM -0700, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>
> Replace the previous approach, in which a single reset map is used, by a
> per-driver approach, in which each auxiliary device driver holds a
> reference to a certain reset map.
Needn't "Replace the previous approach".
Replace single reset map with per-device reset map to allow the driver to
be reused for other NXP block.
>
> This change is needed to allow the driver to be reused for other NXP block
> control IPs such as i.MX8ULP's SIM LPAV.
avoid use words "this change[patch]"
Frank
>
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> ---
> drivers/reset/reset-imx8mp-audiomix.c | 18 ++++++++++++++++--
> 1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
> index 3f6d11270918..5ee5a32c6950 100644
> --- a/drivers/reset/reset-imx8mp-audiomix.c
> +++ b/drivers/reset/reset-imx8mp-audiomix.c
> @@ -23,7 +23,12 @@ struct imx8mp_reset_map {
> bool active_low;
> };
>
> -static const struct imx8mp_reset_map reset_map[] = {
> +struct imx8mp_reset_info {
> + const struct imx8mp_reset_map *map;
> + int num_lines;
> +};
> +
> +static const struct imx8mp_reset_map imx8mp_reset_map[] = {
> [IMX8MP_AUDIOMIX_EARC_RESET] = {
> .offset = IMX8MP_AUDIOMIX_EARC_RESET_OFFSET,
> .mask = BIT(0),
> @@ -41,10 +46,16 @@ static const struct imx8mp_reset_map reset_map[] = {
> },
> };
>
> +static const struct imx8mp_reset_info imx8mp_reset_info = {
> + .map = imx8mp_reset_map,
> + .num_lines = ARRAY_SIZE(imx8mp_reset_map),
> +};
> +
> struct imx8mp_audiomix_reset {
> struct reset_controller_dev rcdev;
> void __iomem *base;
> struct regmap *regmap;
> + const struct imx8mp_reset_info *rinfo;
> };
>
> static struct imx8mp_audiomix_reset *to_imx8mp_audiomix_reset(struct reset_controller_dev *rcdev)
> @@ -56,6 +67,7 @@ static int imx8mp_audiomix_update(struct reset_controller_dev *rcdev,
> unsigned long id, bool assert)
> {
> struct imx8mp_audiomix_reset *priv = to_imx8mp_audiomix_reset(rcdev);
> + const struct imx8mp_reset_map *reset_map = priv->rinfo->map;
> unsigned int mask, offset, active_low, shift, val;
>
> mask = reset_map[id].mask;
> @@ -140,7 +152,8 @@ static int imx8mp_audiomix_reset_probe(struct auxiliary_device *adev,
> return -ENOMEM;
>
> priv->rcdev.owner = THIS_MODULE;
> - priv->rcdev.nr_resets = ARRAY_SIZE(reset_map);
> + priv->rinfo = (void *)id->driver_data;
> + priv->rcdev.nr_resets = priv->rinfo->num_lines;
> priv->rcdev.ops = &imx8mp_audiomix_reset_ops;
> priv->rcdev.of_node = dev->parent->of_node;
> priv->rcdev.dev = dev;
> @@ -164,6 +177,7 @@ static int imx8mp_audiomix_reset_probe(struct auxiliary_device *adev,
> static const struct auxiliary_device_id imx8mp_audiomix_reset_ids[] = {
> {
> .name = "clk_imx8mp_audiomix.reset",
> + .driver_data = (kernel_ulong_t)&imx8mp_reset_info,
> },
> { }
> };
> --
> 2.43.0
>
next prev parent reply other threads:[~2025-10-29 16:42 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-29 13:52 [PATCH v3 0/8] Add support for i.MX8ULP's SIM LPAV Laurentiu Mihalcea
2025-10-29 13:52 ` [PATCH v3 1/8] reset: imx8mp-audiomix: Fix bad mask values Laurentiu Mihalcea
2025-10-29 13:52 ` [PATCH v3 2/8] dt-bindings: clock: document 8ULP's SIM LPAV Laurentiu Mihalcea
2025-10-29 13:52 ` [PATCH v3 3/8] clk: imx: add driver for imx8ulp's sim lpav Laurentiu Mihalcea
2025-10-29 16:17 ` Frank Li
2025-11-03 10:54 ` kernel test robot
2025-11-04 3:57 ` Peng Fan
2025-10-29 13:52 ` [PATCH v3 4/8] reset: imx8mp-audiomix: Drop unneeded macros Laurentiu Mihalcea
2025-10-29 16:19 ` Frank Li
2025-10-29 13:52 ` [PATCH v3 5/8] reset: imx8mp-audiomix: Switch to using regmap API Laurentiu Mihalcea
2025-10-29 16:37 ` Frank Li
2025-10-29 20:51 ` Laurentiu Mihalcea
2025-10-31 18:34 ` Frank Li
2025-10-30 13:06 ` Philipp Zabel
2025-10-31 11:53 ` Laurentiu Mihalcea
2025-10-29 13:52 ` [PATCH v3 6/8] reset: imx8mp-audiomix: Extend the driver usage Laurentiu Mihalcea
2025-10-29 16:42 ` Frank Li [this message]
2025-10-29 13:52 ` [PATCH v3 7/8] reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV Laurentiu Mihalcea
2025-10-29 16:43 ` Frank Li
2025-10-29 13:52 ` [PATCH v3 8/8] arm64: dts: imx8ulp: add sim lpav node Laurentiu Mihalcea
2025-10-29 16:44 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aQJD/I+fPNobYBAW@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=abelvesa@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=laurentiumihalcea111@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=peng.fan@nxp.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox