From: Frank Li <Frank.li@nxp.com>
To: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
Cc: Abel Vesa <abelvesa@kernel.org>, Peng Fan <peng.fan@nxp.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Daniel Baluta <daniel.baluta@nxp.com>,
Shengjiu Wang <shengjiu.wang@nxp.com>,
linux-clk@vger.kernel.org, imx@lists.linux.dev,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: Re: [PATCH v3 7/8] reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
Date: Wed, 29 Oct 2025 12:43:45 -0400 [thread overview]
Message-ID: <aQJEQUIP13ry4f6S@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20251029135229.890-8-laurentiumihalcea111@gmail.com>
On Wed, Oct 29, 2025 at 06:52:28AM -0700, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>
> Support i.MX8ULP's SIM LPAV by adding its reset map definition.
>
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/reset/reset-imx8mp-audiomix.c | 45 +++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
> index 5ee5a32c6950..4e420c6b8fdc 100644
> --- a/drivers/reset/reset-imx8mp-audiomix.c
> +++ b/drivers/reset/reset-imx8mp-audiomix.c
> @@ -3,6 +3,7 @@
> * Copyright 2024 NXP
> */
>
> +#include <dt-bindings/reset/fsl,imx8ulp-sim-lpav.h>
> #include <dt-bindings/reset/imx8mp-reset-audiomix.h>
>
> #include <linux/auxiliary_bus.h>
> @@ -17,6 +18,8 @@
> #define IMX8MP_AUDIOMIX_EARC_RESET_OFFSET 0x200
> #define IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET 0x108
>
> +#define IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET 0x8
> +
> struct imx8mp_reset_map {
> unsigned int offset;
> unsigned int mask;
> @@ -51,6 +54,44 @@ static const struct imx8mp_reset_info imx8mp_reset_info = {
> .num_lines = ARRAY_SIZE(imx8mp_reset_map),
> };
>
> +static const struct imx8mp_reset_map imx8ulp_reset_map[] = {
> + [IMX8ULP_SIM_LPAV_HIFI4_DSP_DBG_RST] = {
> + .offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
> + .mask = BIT(25),
> + .active_low = false,
> + },
> + [IMX8ULP_SIM_LPAV_HIFI4_DSP_RST] = {
> + .offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
> + .mask = BIT(16),
> + .active_low = false,
> + },
> + [IMX8ULP_SIM_LPAV_HIFI4_DSP_STALL] = {
> + .offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
> + .mask = BIT(13),
> + .active_low = false,
> + },
> + [IMX8ULP_SIM_LPAV_DSI_RST_BYTE_N] = {
> + .offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
> + .mask = BIT(5),
> + .active_low = true,
> + },
> + [IMX8ULP_SIM_LPAV_DSI_RST_ESC_N] = {
> + .offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
> + .mask = BIT(4),
> + .active_low = true,
> + },
> + [IMX8ULP_SIM_LPAV_DSI_RST_DPI_N] = {
> + .offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
> + .mask = BIT(3),
> + .active_low = true,
> + },
> +};
> +
> +static const struct imx8mp_reset_info imx8ulp_reset_info = {
> + .map = imx8ulp_reset_map,
> + .num_lines = ARRAY_SIZE(imx8ulp_reset_map),
> +};
> +
> struct imx8mp_audiomix_reset {
> struct reset_controller_dev rcdev;
> void __iomem *base;
> @@ -179,6 +220,10 @@ static const struct auxiliary_device_id imx8mp_audiomix_reset_ids[] = {
> .name = "clk_imx8mp_audiomix.reset",
> .driver_data = (kernel_ulong_t)&imx8mp_reset_info,
> },
> + {
> + .name = "clk_imx8ulp_sim_lpav.reset",
> + .driver_data = (kernel_ulong_t)&imx8ulp_reset_info,
> + },
> { }
> };
> MODULE_DEVICE_TABLE(auxiliary, imx8mp_audiomix_reset_ids);
> --
> 2.43.0
>
next prev parent reply other threads:[~2025-10-29 16:44 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-29 13:52 [PATCH v3 0/8] Add support for i.MX8ULP's SIM LPAV Laurentiu Mihalcea
2025-10-29 13:52 ` [PATCH v3 1/8] reset: imx8mp-audiomix: Fix bad mask values Laurentiu Mihalcea
2025-10-29 13:52 ` [PATCH v3 2/8] dt-bindings: clock: document 8ULP's SIM LPAV Laurentiu Mihalcea
2025-10-29 13:52 ` [PATCH v3 3/8] clk: imx: add driver for imx8ulp's sim lpav Laurentiu Mihalcea
2025-10-29 16:17 ` Frank Li
2025-11-03 10:54 ` kernel test robot
2025-11-04 3:57 ` Peng Fan
2025-10-29 13:52 ` [PATCH v3 4/8] reset: imx8mp-audiomix: Drop unneeded macros Laurentiu Mihalcea
2025-10-29 16:19 ` Frank Li
2025-10-29 13:52 ` [PATCH v3 5/8] reset: imx8mp-audiomix: Switch to using regmap API Laurentiu Mihalcea
2025-10-29 16:37 ` Frank Li
2025-10-29 20:51 ` Laurentiu Mihalcea
2025-10-31 18:34 ` Frank Li
2025-10-30 13:06 ` Philipp Zabel
2025-10-31 11:53 ` Laurentiu Mihalcea
2025-10-29 13:52 ` [PATCH v3 6/8] reset: imx8mp-audiomix: Extend the driver usage Laurentiu Mihalcea
2025-10-29 16:42 ` Frank Li
2025-10-29 13:52 ` [PATCH v3 7/8] reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV Laurentiu Mihalcea
2025-10-29 16:43 ` Frank Li [this message]
2025-10-29 13:52 ` [PATCH v3 8/8] arm64: dts: imx8ulp: add sim lpav node Laurentiu Mihalcea
2025-10-29 16:44 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aQJEQUIP13ry4f6S@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=abelvesa@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=laurentiumihalcea111@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=peng.fan@nxp.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox