[PATCH v1 0/3] Add i.MX943 PCIe supports

[PATCH v1 0/3] Add i.MX943 PCIe supports

[Richard Zhu]

This patch-set adds i.MX943 PCIe supports on EVK board. Please pay
attention to that it relies on the patch-set[1], and the PCIe1 port on
the EVK board relies on the {2].

Both of them are queuing up to be included in the coming 6.20 kernel.
[1] https://lore.kernel.org/imx/176649331066.523506.9443864112044699350.b4-ty@kernel.org/
[2] https://lore.kernel.org/imx/inzg46tc2fwsajxq4vzdyuiq7krzy6xtcg2mjaieninz7zsmgm@mtdjr4tuegpq/

[PATCH v1 1/3] arm64: dts: imx94: add pcie0 and pcie0-ep supports
[PATCH v1 2/3] arm64: dts: imx943: add pcie1 and pcie1-ep supports
[PATCH v1 3/3] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1]

arch/arm64/boot/dts/freescale/imx94.dtsi     |  89 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943-evk.dts | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943.dtsi    |  76 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 273 insertions(+)

[PATCH v1 1/3] arm64: dts: imx94: add pcie0 and pcie0-ep supports

[Richard Zhu]

Add pcie0 and pcie0-ep supports.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx94.dtsi | 89 ++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
index d2f31c8caf6eb..d2fe6e0aebaf8 100644
--- a/arch/arm64/boot/dts/freescale/imx94.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -38,6 +38,13 @@ clk_ext1: clock-ext1 {
 		clock-output-names = "clk_ext1";
 	};
 
+	clk_sys100m: clock-sys100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "clk_sys100m";
+	};
+
 	sai1_mclk: clock-sai1-mclk1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -1366,5 +1373,87 @@ ddr-pmu@4e090dc0 {
 			reg = <0x0 0x4e090dc0 0x0 0x200>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		hsio_blk_ctl: syscon@4c0100c0 {
+			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
+			reg = <0x0 0x4c0100c0 0x0 0x1>;
+			#clock-cells = <1>;
+			clocks = <&clk_sys100m>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+		};
+
+		pcie0: pcie@4c300000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x60100000 0 0xfe00000>,
+			      <0 0x4c360000 0 0x10000>,
+			      <0 0x4c340000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
+				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x80000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			msi-map = <0x0 &its 0x10 0x1>,
+				  <0x100 &its 0x11 0x7>;
+			msi-map-mask = <0x1ff>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi", "pme", "intr";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks =<&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					 <&scmi_clk IMX94_CLK_HSIOPLL>,
+					 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie-ep@4c300000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x4c360000 0 0x1000>,
+			      <0 0x4c320000 0 0x1000>,
+			      <0 0x4c340000 0 0x4000>,
+			      <0 0x4c370000 0 0x10000>,
+			      <0x9 0 1 0>;
+			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks =<&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					 <&scmi_clk IMX94_CLK_HSIOPLL>,
+					 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x10 0x1>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			status = "disabled";
+		};
 	};
 };
-- 
2.37.1

[PATCH v1 2/3] arm64: dts: imx943: add pcie1 and pcie1-ep supports

[Richard Zhu]

Add pcie1 and pcie1-ep supports.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx943.dtsi | 76 +++++++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi b/arch/arm64/boot/dts/freescale/imx943.dtsi
index 45b8da758e877..0df9d24cf985d 100644
--- a/arch/arm64/boot/dts/freescale/imx943.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx943.dtsi
@@ -145,4 +145,80 @@ l3_cache: l3-cache {
 			cache-unified;
 		};
 	};
+
+	soc {
+		pcie1: pcie@4c380000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <8 0x80100000 0 0xfe00000>,
+			      <0 0x4c3e0000 0 0x10000>,
+			      <0 0x4c3c0000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
+				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x80000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			msi-map = <0x0 &its 0x98 0x1>,
+				  <0x100 &its 0x99 0x7>;
+			msi-map-mask = <0x1ff>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi", "pme", "intr";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks =<&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					 <&scmi_clk IMX94_CLK_HSIOPLL>,
+					 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie1_ep: pcie-ep@4c380000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <0 0x4c3e0000 0 0x1000>,
+			      <0 0x4c3a0000 0 0x1000>,
+			      <0 0x4c3c0000 0 0x4000>,
+			      <0 0x4c3f0000 0 0x10000>,
+			      <0xa 0 1 0>;
+			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks =<&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					 <&scmi_clk IMX94_CLK_HSIOPLL>,
+					 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x98 0x1>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+	};
 };
-- 
2.37.1

[PATCH v1 3/3] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support

[Richard Zhu]

Add pcie[0,1] and pcie-ep[0,1] support.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx943-evk.dts | 108 +++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
index 31fa9675cee13..37a8349bc7905 100644
--- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -53,6 +53,13 @@ dmic: dmic {
 		#sound-dai-cells = <0>;
 	};
 
+	pcie_ref_clk: clock-pcie-ref {
+		compatible = "gpio-gate-clock";
+		clocks = <&xtal25m>;
+		#clock-cells = <0>;
+		enable-gpios = <&pca9670_i2c3 7 GPIO_ACTIVE_LOW>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		off-on-delay-us = <12000>;
@@ -74,6 +81,41 @@ reg_audio_pwr: regulator-wm8962-pwr {
 		enable-active-high;
 	};
 
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6416_i2c3_u46 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * M.2 device only can be enabled(W_DISABLE1#) after all Power
+		 * Rails reach their minimum operating voltage (PCI Express M.2
+		 * Specification r5.1 3.1.4 Power-up Timing).
+		 * Set a delay equal to the max value of Tsettle here.
+		 */
+		startup-delay-us = <5000>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE_WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6416_i2c3_u46 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_slot_pwr: regulator-slot-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIe slot-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6416_i2c3_u46 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reserved-memory {
 		ranges;
 		#address-cells = <2>;
@@ -144,6 +186,13 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 		device_type = "memory";
 	};
+
+	xtal25m: clock-xtal25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "xtal_25MHz";
+	};
 };
 
 &enetc1 {
@@ -609,6 +658,18 @@ IMX94_PAD_GPIO_IO28__LPI2C6_SCL		0x40000b9e
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B	0x4000031e
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B	0x4000031e
+		>;
+	};
+
 	pinctrl_pdm: pdmgrp {
 		fsl,pins = <
 			IMX94_PAD_PDM_CLK__PDM_CLK			0x31e
@@ -756,6 +817,53 @@ IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS	0x3fe
 	};
 };
 
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX94_CLK_HSIO>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+		 <&hsio_blk_ctl 0>,
+		 <&pcie_ref_clk>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
+		      "ref", "extref";
+	reset-gpio = <&pcal6416_i2c3_u46 3 GPIO_ACTIVE_LOW>;
+	vpcie3v3aux-supply = <&reg_pcie0>;
+	supports-clkreq;
+	status = "okay";
+};
+
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie3v3aux-supply = <&reg_pcie0>;
+	status = "disabled";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX94_CLK_HSIO>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+		 <&hsio_blk_ctl 0>,
+		 <&pcie_ref_clk>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
+		      "ref", "extref";
+	reset-gpio = <&pcal6416_i2c3_u46 1 GPIO_ACTIVE_LOW>;
+	vpcie3v3aux-supply = <&reg_slot_pwr>;
+	status = "okay";
+};
+
+&pcie1_ep {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	vpcie3v3aux-supply = <&reg_slot_pwr>;
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-- 
2.37.1

Re: [PATCH v1 1/3] arm64: dts: imx94: add pcie0 and pcie0-ep supports

[Frank Li]

On Fri, Feb 06, 2026 at 01:50:05PM +0800, Richard Zhu wrote:
> Add pcie0 and pcie0-ep supports.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx94.dtsi | 89 ++++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
> index d2f31c8caf6eb..d2fe6e0aebaf8 100644
> --- a/arch/arm64/boot/dts/freescale/imx94.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
> @@ -38,6 +38,13 @@ clk_ext1: clock-ext1 {
>  		clock-output-names = "clk_ext1";
>  	};
>
> +	clk_sys100m: clock-sys100m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <100000000>;
> +		clock-output-names = "clk_sys100m";
> +	};
> +

keep order as node name clock-sys100m. which should be after clock-sai1-mclk1.

>  	sai1_mclk: clock-sai1-mclk1 {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
> @@ -1366,5 +1373,87 @@ ddr-pmu@4e090dc0 {
>  			reg = <0x0 0x4e090dc0 0x0 0x200>;
>  			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> +
> +		hsio_blk_ctl: syscon@4c0100c0 {

order according to hex address, 4c0100c0 less than 4e090dc0

Frank
> +			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
> +			reg = <0x0 0x4c0100c0 0x0 0x1>;
> +			#clock-cells = <1>;
> +			clocks = <&clk_sys100m>;
> +			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
> +		};
> +
> +		pcie0: pcie@4c300000 {
> +			compatible = "fsl,imx95-pcie";
> +			reg = <0 0x4c300000 0 0x10000>,
> +			      <0 0x60100000 0 0xfe00000>,
> +			      <0 0x4c360000 0 0x10000>,
> +			      <0 0x4c340000 0 0x4000>;
> +			reg-names = "dbi", "config", "atu", "app";
> +			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
> +				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x80000000>;
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			device_type = "pci";
> +			linux,pci-domain = <2>;
> +			msi-map = <0x0 &its 0x10 0x1>,
> +				  <0x100 &its 0x11 0x7>;
> +			msi-map-mask = <0x1ff>;
> +			bus-range = <0x00 0xff>;
> +			num-lanes = <1>;
> +			num-viewport = <8>;
> +			interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "msi", "pme", "intr";
> +			#interrupt-cells = <1>;
> +			interrupt-map-mask = <0 0 0 0x7>;
> +			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 2 &gic 0 0 GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 3 &gic 0 0 GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 4 &gic 0 0 GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +				 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
> +				 <&hsio_blk_ctl 0>;
> +			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
> +			assigned-clocks =<&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +					 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +					 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
> +			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
> +			assigned-clock-parents = <0>, <0>,
> +						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
> +			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
> +			fsl,max-link-speed = <3>;
> +			status = "disabled";
> +		};
> +
> +		pcie0_ep: pcie-ep@4c300000 {
> +			compatible = "fsl,imx95-pcie-ep";
> +			reg = <0 0x4c300000 0 0x10000>,
> +			      <0 0x4c360000 0 0x1000>,
> +			      <0 0x4c320000 0 0x1000>,
> +			      <0 0x4c340000 0 0x4000>,
> +			      <0 0x4c370000 0 0x10000>,
> +			      <0x9 0 1 0>;
> +			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
> +			num-lanes = <1>;
> +			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "dma";
> +			clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +				 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
> +			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
> +			assigned-clocks =<&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +					 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +					 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
> +			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
> +			assigned-clock-parents = <0>, <0>,
> +						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
> +			msi-map = <0x0 &its 0x10 0x1>;
> +			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
> +			status = "disabled";
> +		};
>  	};
>  };
> --
> 2.37.1
>

Re: [PATCH v1 3/3] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support

[Frank Li]

On Fri, Feb 06, 2026 at 01:50:07PM +0800, Richard Zhu wrote:
> Add pcie[0,1] and pcie-ep[0,1] support.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx943-evk.dts | 108 +++++++++++++++++++
>  1 file changed, 108 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
> index 31fa9675cee13..37a8349bc7905 100644
> --- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
> @@ -53,6 +53,13 @@ dmic: dmic {
>  		#sound-dai-cells = <0>;
>  	};
>
> +	pcie_ref_clk: clock-pcie-ref {
> +		compatible = "gpio-gate-clock";
> +		clocks = <&xtal25m>;
> +		#clock-cells = <0>;
> +		enable-gpios = <&pca9670_i2c3 7 GPIO_ACTIVE_LOW>;
> +	};
> +

order by node name, clock-pcie-ref should before dmic.

>  	reg_usdhc2_vmmc: regulator-usdhc2 {
>  		compatible = "regulator-fixed";
>  		off-on-delay-us = <12000>;
> @@ -74,6 +81,41 @@ reg_audio_pwr: regulator-wm8962-pwr {
>  		enable-active-high;
>  	};
>
> +	reg_m2_pwr: regulator-m2-pwr {

order by by node name, regulator-m2-pwr

Frank
> +		compatible = "regulator-fixed";
> +		regulator-name = "M.2-power";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&pcal6416_i2c3_u46 2 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		/*
> +		 * M.2 device only can be enabled(W_DISABLE1#) after all Power
> +		 * Rails reach their minimum operating voltage (PCI Express M.2
> +		 * Specification r5.1 3.1.4 Power-up Timing).
> +		 * Set a delay equal to the max value of Tsettle here.
> +		 */
> +		startup-delay-us = <5000>;
> +	};
> +
> +	reg_pcie0: regulator-pcie {
> +		compatible = "regulator-fixed";
> +		regulator-name = "PCIE_WLAN_EN";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&reg_m2_pwr>;
> +		gpio = <&pcal6416_i2c3_u46 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_slot_pwr: regulator-slot-pwr {
> +		compatible = "regulator-fixed";
> +		regulator-name = "PCIe slot-power";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&pcal6416_i2c3_u46 0 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>  	reserved-memory {
>  		ranges;
>  		#address-cells = <2>;
> @@ -144,6 +186,13 @@ memory@80000000 {
>  		reg = <0x0 0x80000000 0x0 0x80000000>;
>  		device_type = "memory";
>  	};
> +
> +	xtal25m: clock-xtal25m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +		clock-output-names = "xtal_25MHz";
> +	};
>  };
>
>  &enetc1 {
> @@ -609,6 +658,18 @@ IMX94_PAD_GPIO_IO28__LPI2C6_SCL		0x40000b9e
>  		>;
>  	};
>
> +	pinctrl_pcie0: pcie0grp {
> +		fsl,pins = <
> +			IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B	0x4000031e
> +		>;
> +	};
> +
> +	pinctrl_pcie1: pcie1grp {
> +		fsl,pins = <
> +			IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B	0x4000031e
> +		>;
> +	};
> +
>  	pinctrl_pdm: pdmgrp {
>  		fsl,pins = <
>  			IMX94_PAD_PDM_CLK__PDM_CLK			0x31e
> @@ -756,6 +817,53 @@ IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS	0x3fe
>  	};
>  };
>
> +&pcie0 {
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	pinctrl-names = "default";
> +	clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
> +		 <&hsio_blk_ctl 0>,
> +		 <&pcie_ref_clk>;
> +	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
> +		      "ref", "extref";
> +	reset-gpio = <&pcal6416_i2c3_u46 3 GPIO_ACTIVE_LOW>;
> +	vpcie3v3aux-supply = <&reg_pcie0>;
> +	supports-clkreq;
> +	status = "okay";
> +};
> +
> +&pcie0_ep {
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	pinctrl-names = "default";
> +	vpcie3v3aux-supply = <&reg_pcie0>;
> +	status = "disabled";
> +};
> +
> +&pcie1 {
> +	pinctrl-0 = <&pinctrl_pcie1>;
> +	pinctrl-names = "default";
> +	clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
> +		 <&hsio_blk_ctl 0>,
> +		 <&pcie_ref_clk>;
> +	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
> +		      "ref", "extref";
> +	reset-gpio = <&pcal6416_i2c3_u46 1 GPIO_ACTIVE_LOW>;
> +	vpcie3v3aux-supply = <&reg_slot_pwr>;
> +	status = "okay";
> +};
> +
> +&pcie1_ep {
> +	pinctrl-0 = <&pinctrl_pcie1>;
> +	pinctrl-names = "default";
> +	vpcie3v3aux-supply = <&reg_slot_pwr>;
> +	status = "disabled";
> +};
> +
>  &usdhc1 {
>  	pinctrl-0 = <&pinctrl_usdhc1>;
>  	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> --
> 2.37.1
>

RE: [PATCH v1 3/3] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support

[Sherry Sun]

> Subject: [PATCH v1 3/3] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-
> ep[0,1] support
> 
> Add pcie[0,1] and pcie-ep[0,1] support.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx943-evk.dts | 108 +++++++++++++++++++
>  1 file changed, 108 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts
> b/arch/arm64/boot/dts/freescale/imx943-evk.dts
> index 31fa9675cee13..37a8349bc7905 100644
> --- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
> @@ -53,6 +53,13 @@ dmic: dmic {
>  		#sound-dai-cells = <0>;
>  	};
> 
> +	pcie_ref_clk: clock-pcie-ref {
> +		compatible = "gpio-gate-clock";
> +		clocks = <&xtal25m>;
> +		#clock-cells = <0>;
> +		enable-gpios = <&pca9670_i2c3 7 GPIO_ACTIVE_LOW>;
> +	};
> +
>  	reg_usdhc2_vmmc: regulator-usdhc2 {
>  		compatible = "regulator-fixed";
>  		off-on-delay-us = <12000>;
> @@ -74,6 +81,41 @@ reg_audio_pwr: regulator-wm8962-pwr {
>  		enable-active-high;
>  	};
> 
> +	reg_m2_pwr: regulator-m2-pwr {
> +		compatible = "regulator-fixed";
> +		regulator-name = "M.2-power";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&pcal6416_i2c3_u46 2 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		/*
> +		 * M.2 device only can be enabled(W_DISABLE1#) after all
> Power
> +		 * Rails reach their minimum operating voltage (PCI Express
> M.2
> +		 * Specification r5.1 3.1.4 Power-up Timing).
> +		 * Set a delay equal to the max value of Tsettle here.
> +		 */
> +		startup-delay-us = <5000>;
> +	};
> +
> +	reg_pcie0: regulator-pcie {
> +		compatible = "regulator-fixed";
> +		regulator-name = "PCIE_WLAN_EN";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&reg_m2_pwr>;
> +		gpio = <&pcal6416_i2c3_u46 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
Hi Richard,
Please check the patch here: https://patchwork.kernel.org/project/imx/patch/20260204022306.2372889-1-sherry.sun@nxp.com/
I have added the reg_m2_pwr and reg_pcie0(rename to reg_m2_wlan
to support SDIO wifi), so you can delete these two nodes in your patch.

Best Regards
Sherry

> +	reg_slot_pwr: regulator-slot-pwr {
> +		compatible = "regulator-fixed";
> +		regulator-name = "PCIe slot-power";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&pcal6416_i2c3_u46 0 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>  	reserved-memory {
>  		ranges;
>  		#address-cells = <2>;
> @@ -144,6 +186,13 @@ memory@80000000 {
>  		reg = <0x0 0x80000000 0x0 0x80000000>;
>  		device_type = "memory";
>  	};
> +
> +	xtal25m: clock-xtal25m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +		clock-output-names = "xtal_25MHz";
> +	};
>  };
> 
>  &enetc1 {
> @@ -609,6 +658,18 @@ IMX94_PAD_GPIO_IO28__LPI2C6_SCL
> 	0x40000b9e
>  		>;
>  	};
> 
> +	pinctrl_pcie0: pcie0grp {
> +		fsl,pins = <
> +			IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B
> 	0x4000031e
> +		>;
> +	};
> +
> +	pinctrl_pcie1: pcie1grp {
> +		fsl,pins = <
> +			IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B
> 	0x4000031e
> +		>;
> +	};
> +
>  	pinctrl_pdm: pdmgrp {
>  		fsl,pins = <
>  			IMX94_PAD_PDM_CLK__PDM_CLK
> 	0x31e
> @@ -756,6 +817,53 @@ IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS	0x3fe
>  	};
>  };
> 
> +&pcie0 {
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	pinctrl-names = "default";
> +	clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
> +		 <&hsio_blk_ctl 0>,
> +		 <&pcie_ref_clk>;
> +	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
> +		      "ref", "extref";
> +	reset-gpio = <&pcal6416_i2c3_u46 3 GPIO_ACTIVE_LOW>;
> +	vpcie3v3aux-supply = <&reg_pcie0>;
> +	supports-clkreq;
> +	status = "okay";
> +};
> +
> +&pcie0_ep {
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	pinctrl-names = "default";
> +	vpcie3v3aux-supply = <&reg_pcie0>;
> +	status = "disabled";
> +};
> +
> +&pcie1 {
> +	pinctrl-0 = <&pinctrl_pcie1>;
> +	pinctrl-names = "default";
> +	clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
> +		 <&hsio_blk_ctl 0>,
> +		 <&pcie_ref_clk>;
> +	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
> +		      "ref", "extref";
> +	reset-gpio = <&pcal6416_i2c3_u46 1 GPIO_ACTIVE_LOW>;
> +	vpcie3v3aux-supply = <&reg_slot_pwr>;
> +	status = "okay";
> +};
> +
> +&pcie1_ep {
> +	pinctrl-0 = <&pinctrl_pcie1>;
> +	pinctrl-names = "default";
> +	vpcie3v3aux-supply = <&reg_slot_pwr>;
> +	status = "disabled";
> +};
> +
>  &usdhc1 {
>  	pinctrl-0 = <&pinctrl_usdhc1>;
>  	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> --
> 2.37.1
>