Re: [PATCH net-next 08/12] dt-bindings: net: toshiba,tc965x-dwmac: add TC956x Ethernet bridge

[Bjorn Andersson <andersson@kernel.org>]

On Thu, May 07, 2026 at 01:37:09PM -0500, Alex Elder wrote:
> On 5/7/26 9:12 AM, Bjorn Andersson wrote:
> > On Fri, May 01, 2026 at 10:54:16AM -0500, Alex Elder wrote:
> > > diff --git a/Documentation/devicetree/bindings/net/toshiba,tc956x-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,tc956x-dwmac.yaml
> > [..]
> > > +
> > > +  gpio-controller: true
> > 
> > I don't have any concern with the use of a proper gpio driver to model
> > the implementation, but if I understand correctly this relationship
> > between gpio controller and gpio consumer is strictly internal to "the
> > PCI device".
> 
> (I think you're already cool with this but I still wanted to respond.)
> 

Thank you for the further clarifications, and added details, Alex. This
does look reasonable to me.

Regards,
Bjorn

> That is not correct.  These GPIO lines are used two ways for the
> RB3gen2:
> - drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c uses GPIOs 2 and 3 to
>   assert/deassert the reset lines associated with the two exposed
>   downstream PCIe ports on the PCIe switch within the TC956x.
> 
> - Each of the Ethernet PHYs has a reset GPIO.  On the RB3gen2, the
>   GPIOs used for the purpose come from the GPIO controller embedded
>   in the TC9564 (00 and 01).
> 
> These are therefore "exposed" (they are *not* strictly internal).
> 
> > Is this connection variable or is the link merely expressed in
> > DeviceTree to mitigate the fact that you choose to implement the
> > responsibilities of the two parts split into two device drivers?
> 
> It is variable.  These resets might be implemented by other GPIO
> controllers on other platforms.
> 
> > Are there other consumers of these TC956x gpios which would result in a
> > board designer (and hence dts author) to ever reference this
> > gpio-controller in a different way?
> 
> They could.  Nine of these GPIOs are exposed by the TC956x pins
> (GPIO00-06, GPIO12, GPIO35 and GPIO36).  The RB3gen2 uses 00-03
> (and possibly 04 but that's for a PHY we haven't tested yet).
> 
> 					-Alex
> 
> > Regards,
> > Bjorn
>